HELP! CF Hood Problem - TriStateTuners.com :: Home of Tristate Auto Enthusiast

215ek · 02-24-2009, 07:46 PM

so i just got an AMAZING deal on an oem carbon fiber hood.

i couldnt wait to put it on so i just got home and took my hood off.

when i put the cf one on, the bolts went in but wouldnt screw. i thought stripped or no threads, but there are threads.

my stock bolts are just ever so thinner than the threads on the hood. anyone else have this problem, or know how i could get an accurate size of a bolt so i dont have to bring the hood to home depot tomorrow.

one more thing.. any certain bolts i should get, to avoid rust/breaking bolts?

thanks alot guys

**TROLL** · 02-24-2009, 07:50 PM

...get new bolts?

i'm... confused.

rich33389 · 02-24-2009, 07:53 PM

JB weld it on.

SvicksTc · 02-24-2009, 07:55 PM

ya just get new bolts, take your OEM bolts in and jsut look for ones a little smaller with same thread pattern shouldnt be hard.....

Vypurr · 02-24-2009, 07:56 PM

Just go to your garage and find that pile of bolts and screws and try until one fits? Everybody has a pile of bolts somewhere.

phate1229 · 02-24-2009, 08:01 PM

just go to ace or home depot, that's what I did when I got my seibon

DPancoast · 02-24-2009, 10:03 PM

Quote:

Originally Posted by Vypurr

Just go to your garage and find that pile of bolts and screws and try until one fits? Everybody has a pile of bolts somewhere.

haha I have a cool whip jug of bolts... its wack

OutToWinPAHC · 02-24-2009, 10:01 PM

Lowes is good for off the shelf metric stuff for that.

Honduh · 02-24-2009, 11:40 PM

who installs a c/f hood in feburary anyway?

MANLYmiata · 02-24-2009, 11:46 PM

Quote:

Originally Posted by Honduh

who installs a c/f hood in feburary anyway?

what does that matter?

Honduh · 02-25-2009, 12:05 AM

the fact that its feburary and theres still a chance for snow, why risk ****ing up your new c/f hood with road salt?

01civicsi · 02-25-2009, 12:11 AM

lol, worst post ever. get some new bolts man bring your old ones in with you.

MANLYmiata · 02-25-2009, 12:14 AM

how is road salt gonna hurt a CF hood?

TurboTagTeam · 02-25-2009, 12:54 AM

Quote:

Originally Posted by MANLYmiata

how is road salt gonna hurt a CF hood?

It wont.

Salt/road grime does not cause the fading of the gell coat on Carbon Fiber hoods. The fading is caused by direct exposure to the sun.

There is NO WAY to prevent it unless you DA the stock crappy gell coat off and spray a few coats of quality clear coat on the hood. 10 minutes after taking my brand new seibon hood out of the box.......it was in the paint booth getting re-cleared. Thats the only way to insure it will stay looking fresh.

fballman1987 · 02-25-2009, 12:56 AM

Quote:

Originally Posted by TurboTagTeam

It wont.

Salt/road grime does not cause the fading of the gell coat on Carbon Fiber hoods. The fading is caused by direct exposure to the sun.

There is NO WAY to prevent it unless you DA the stock crappy gell coat off and spray a few coats of quality clear coat on the hood. 10 minutes after taking my brand new seibon hood out of the box.......it was in the paint booth getting re-cleared. Thats the only way to insure it will stay looking fresh.

thats what i was gonna say, its the sunlight that fades the CF not the salt and road grime.

Honduh · 02-25-2009, 01:03 AM

Quote:

Originally Posted by TurboTagTeam

It wont.

Salt/road grime does not cause the fading of the gell coat on Carbon Fiber hoods. The fading is caused by direct exposure to the sun.

There is NO WAY to prevent it unless you DA the stock crappy gell coat off and spray a few coats of quality clear coat on the hood. 10 minutes after taking my brand new seibon hood out of the box.......it was in the paint booth getting re-cleared. Thats the only way to insure it will stay looking fresh.

I was talking about the damage from the rock salt due to scratches and putting marks in the c/f. not about the clear coat fading.

*edit*
in fact I didn't even say anything about sun fade.

Kevin · 02-25-2009, 04:06 AM

Quote:

Originally Posted by Honduh

I was talking about the damage from the rock salt due to scratches and putting marks in the c/f. not about the clear coat fading.

*edit*
in fact I didn't even say anything about sun fade.

Stop trying to save face. You made a retarded statement.

My POS vis hood is warped and only 3 bolts thread in.

Honduh · 02-25-2009, 12:25 AM

it can crack the clear. it can also damange the weave. it can also take a chip out of the hood itself. I have a hood that I can show you what happens when cinder hits c/f.

92sileighty · 02-25-2009, 03:25 AM

Quote:

Originally Posted by Honduh

it can crack the clear. it can also damange the weave. it can also take a chip out of the hood itself. I have a hood that I can show you what happens when cinder hits c/f.

cinder? seriously? last time i checked cinder comes from volcanic ash...
road salt is calcium chloride... which shouldn't damage carbon fiber since a hood is clearly not made of water....

home depot run 's are always fun, especially for random bolts lol

MANLYmiata · 02-25-2009, 12:29 AM

hmm.. well my bf's hood has gone through 2 winters and looks good as new.
what brand is yours?

02-24-2009, 07:46 PM	#1
215ek Tri-State Post Whore Join Date: Sep 2008 Member #8604 My Ride: is rubbin, therefore its dubbin iTrader: (0)	HELP! CF Hood Problem so i just got an AMAZING deal on an oem carbon fiber hood. i couldnt wait to put it on so i just got home and took my hood off. when i put the cf one on, the bolts went in but wouldnt screw. i thought stripped or no threads, but there are threads. my stock bolts are just ever so thinner than the threads on the hood. anyone else have this problem, or know how i could get an accurate size of a bolt so i dont have to bring the hood to home depot tomorrow. one more thing.. any certain bolts i should get, to avoid rust/breaking bolts? thanks alot guys __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-24-2009, 07:55 PM	#4
SvicksTc Tri-State Post Whore Join Date: Apr 2008 Location: Spoolin a Snail Member #7395 My Ride: Nike 6.0 iTrader: (1)	ya just get new bolts, take your OEM bolts in and jsut look for ones a little smaller with same thread pattern shouldnt be hard..... __________________ Why V-tec When there is To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. ? \|Nikon\| Twitter: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-25-2009, 12:14 AM	#13
MANLYmiata Tri-State Addict Join Date: Oct 2008 Location: DELCO Member #9832 My Ride: ZR1 iTrader: (0)	how is road salt gonna hurt a CF hood? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-25-2009, 12:29 AM	#20
MANLYmiata Tri-State Addict Join Date: Oct 2008 Location: DELCO Member #9832 My Ride: ZR1 iTrader: (0)	hmm.. well my bf's hood has gone through 2 winters and looks good as new. what brand is yours? __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blue 240 w/ cf hood and got jesus? sticker on hood	05suby	Spotted!	8	10-19-2007 02:35 PM

02-24-2009, 07:53 PM	#3
rich33389 Tri-State Aficionado Join Date: Dec 2007 Location: NJ Member #6487 My Ride: 91 Eagle Talon TSi AWD iTrader: (0)	JB weld it on.

02-24-2009, 08:01 PM	#6
phate1229 Tri-State Addict Join Date: Sep 2008 Location: West Chester Member #8613 My Ride: 98 Foz iTrader: (0)	just go to ace or home depot, that's what I did when I got my seibon

02-24-2009, 10:01 PM	#8
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	Lowes is good for off the shelf metric stuff for that.

02-24-2009, 11:40 PM	#9
Honduh Tri-State Post Whore Join Date: May 2006 Member #1977 iTrader: (0)	who installs a c/f hood in feburary anyway?

02-25-2009, 12:05 AM	#11
Honduh Tri-State Post Whore Join Date: May 2006 Member #1977 iTrader: (0)	the fact that its feburary and theres still a chance for snow, why risk ****ing up your new c/f hood with road salt?

02-25-2009, 12:11 AM	#12
01civicsi Tri-State Training Wheels Banned Join Date: Jan 2009 Member #10772 My Ride: 2001 civic si iTrader: (0)	lol, worst post ever. get some new bolts man bring your old ones in with you.

02-25-2009, 12:25 AM	#18
Honduh Tri-State Post Whore Join Date: May 2006 Member #1977 iTrader: (0)	it can crack the clear. it can also damange the weave. it can also take a chip out of the hood itself. I have a hood that I can show you what happens when cinder hits c/f.