Gauging interest S13 hyrdo E-brake install kit..complete bolt on!!

[JTunedMotorsports]

Hello All

I am gauging interst in a hydro-ebrake install kit complate with lines fittings and eye loops. I am currently using a K-Sport e-brake custom mounted in my center consol and need a bolt in line it that would work with various positions in my center consol so I made one.
One can trim or install this in a few configurations but the way I have mine is most best. The way this kit works thre are are 2 brake unions on the car. One is in the engine bay and one is under the rear subframe in the back. First you take out the factory hardline that supplies the rear brake fluid and put in 1 fitting in each union..then connect 1 lines and run it to the e-brake. then put the line into the other union and run both lines into the ebrake handle...im sure ppl can make their own handles and use different master cyl but its up to you..i will answer more ?'s and pics are below for better explaination

For S14/S15 cars i need a donor car to see if this works first...
This is currently used on my drift car and its been on for 3 months

If someone is interested in one for anyother car i can custom make you a line set

Contents
2 lines sets with 90 degree females on both ends..
2 fittings used for the master cyl in handle
2 fittings for each oem brake union
5 eye loops

Shooting for around $205 shipped.
Thats a good price conpaired to the 2 feet lines k sport sells for $120
and this is direct bolt in and you dont need to use or cut and flare old hardlines..