R/T Tuning Alignment = Awesome - TriStateTuners.com :: Home of Tristate Auto Enthusiast

95naSTA · 11-09-2009, 10:50 PM

I had my alignment done on my 95 Bonnie this past Friday and couldn't be happier with how it turned out.

I'm dropped over 3.5" on some home-made coilovers up front and custom rear springs. Needless to say I've been given the 'It's dropped we can't align it' line more than a few times.. From there I would go to a buddy's shop and aligned it myself. I'm no noob to turning a wrench and could get it in the green but with lack of experience comes limitation..

When I saw the "No car is to low, we can do every car". It really made me want to finally let someone else set my car straight.

I was pleasantly surprised to find a Tech that actually gave a **** about the end result and was able to explain potential issues etc. I replaced a lot of the wear items on my 227k old suspension but didn't catch everything. Pat (IIRC) was ready to do any work needed to make everything 110% but was also able to level with me on the severity of the issues I had. Not only that but I got some experience based input on camber & tire wear to get exactly what I wanted.

The end result is awesome. I put 300 miles on since I left R/T and I'm still loving every minute of it. The camber is on point, the wheel is perfect, and the overall handling is noticeably improved.

You guys are great. Thanks again.

justinlansdale · 11-09-2009, 11:15 PM

pat rulz.

Honest_Bob · 11-10-2009, 03:54 AM

Quote:

Originally Posted by justinlansdale

pat rulz.

x2

Vince@R/TTuning · 11-10-2009, 11:33 AM

Thats Awesome!!!!... Its always good to be able to make such a difference that the customer can feel it.

Def the coolest Bonneville we've ever seen!!!!

Nick 95 6sp · 11-13-2009, 03:55 PM

Vince, Pat, R/T folks of all flavors,

I'm still loving my alignment and corner balancing you guys did...but I'm about to somewhat upset the weights with some hardware removals and additions.

Vince,
remember when we had the short talk "...yea, HKS twin setup would be awesome..." well here's what I just picked up, along with all the other original kit parts not shown:

This won't mess up my alignment, will it

Vince@R/TTuning · 11-13-2009, 04:31 PM

^^^ Hey Nick, that set up might throw your wieghts off a lil bit.....

BUT WHO CARES!!!!...thats awesome!!!!! You actually just made my week with that....

Let me know when ya get it all together and if ya need any thing..

11-09-2009, 10:50 PM	#1
95naSTA Tri-State Addict Join Date: Dec 2007 Location: Port Fishington, Philly Member #6568 My Ride: 95 Bonnie, 98 i30, 07 Ducati Monster S2R 800 iTrader: (0)	R/T Tuning Alignment = Awesome I had my alignment done on my 95 Bonnie this past Friday and couldn't be happier with how it turned out. I'm dropped over 3.5" on some home-made coilovers up front and custom rear springs. Needless to say I've been given the 'It's dropped we can't align it' line more than a few times.. From there I would go to a buddy's shop and aligned it myself. I'm no noob to turning a wrench and could get it in the green but with lack of experience comes limitation.. When I saw the "No car is to low, we can do every car". It really made me want to finally let someone else set my car straight. I was pleasantly surprised to find a Tech that actually gave a **** about the end result and was able to explain potential issues etc. I replaced a lot of the wear items on my 227k old suspension but didn't catch everything. Pat (IIRC) was ready to do any work needed to make everything 110% but was also able to level with me on the severity of the issues I had. Not only that but I got some experience based input on camber & tire wear to get exactly what I wanted. The end result is awesome. I put 300 miles on since I left R/T and I'm still loving every minute of it. The camber is on point, the wheel is perfect, and the overall handling is noticeably improved. You guys are great. Thanks again.

11-09-2009, 11:15 PM	#2
justinlansdale Tri-State Post Whore Join Date: Apr 2007 Location: Montgomeryville, PA Member #4286 My Ride: old BMW & obnoxious bike(s) iTrader: (5)	pat rulz. __________________ // To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

11-10-2009, 11:33 AM	#4
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	Thats Awesome!!!!... Its always good to be able to make such a difference that the customer can feel it. Def the coolest Bonneville we've ever seen!!!! __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

11-13-2009, 03:55 PM	#5
Nick 95 6sp Tri-State Post Whore Join Date: Feb 2007 Location: Narberth, PA Member #3675 My Ride: '95 Supra Turbo 6sp iTrader: (0)	Vince, Pat, R/T folks of all flavors, I'm still loving my alignment and corner balancing you guys did...but I'm about to somewhat upset the weights with some hardware removals and additions. Vince, remember when we had the short talk "...yea, HKS twin setup would be awesome..." well here's what I just picked up, along with all the other original kit parts not shown: This won't mess up my alignment, will it __________________ Nick '95 6sp Supra Twin GT2860's w/TiAL exhaust housings, 2X TiAL WG's and BOV's, on V-band moded HKS twin manifolds, AEM v2, FJO w/NTK, AEM meth/water spray, GSC S1 cams, OS Giken triple clutch and Super Lock LSD, Racelogic

11-13-2009, 04:31 PM	#6
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	^^^ Hey Nick, that set up might throw your wieghts off a lil bit..... BUT WHO CARES!!!!...thats awesome!!!!! You actually just made my week with that.... Let me know when ya get it all together and if ya need any thing.. __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HUNTER ALIGNMENT Rack... Schedule your race or street alignment now.	S.Milone	(Past Vendors)	203	04-28-2013 06:51 PM
Tuning and Datalogging for your 2006+ Honda Civic at R/T Tuning	PaleDSM	(Past Vendors)	23	09-11-2012 10:44 AM
RT Tuning = Awesome	BakaN20	(Past Vendors)	0	05-11-2010 11:50 AM
Another Thumbs up For the Awesome Guys at R/T Tuning.	JSpecV03	(Past Vendors)	4	06-18-2009 05:29 PM
Rt tuning fall alignment special! PRICE EXTENDED THROUGH THIS WEEK! HURRY!	Matt@R/Ttuning	(Past Vendors)	14	09-22-2008 12:54 PM