Anyone know of a shop that does Fender Rolling? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

CHR!S · 02-09-2008, 02:29 PM

I need to get my front & rear fenders rolled on my s2000 so i dont have any problems with rubbing. does anyone know of a shop that i can go to that does a good job?

tia

CHAOS · 02-09-2008, 02:30 PM

I think area1320 and r/t tuning both do it.

95TurboDC2 · 02-09-2008, 02:49 PM

+1 on r/t tuning. iv seen many cars that they have done. quality work and people to work with.

RyanG · 02-09-2008, 02:50 PM

rolling an s?? how low and how huge of tires do you have

S's usually can get away with alot

CHR!S · 02-09-2008, 03:13 PM

im not low at the moment, but once i get suspension ill only be 1.5-2" lower than stock. the wheels & tires are pretty gnarly, got the j's racing specs (except narrower rear
tires). the wheels are bbs ryII's 17x8 17x9 +40 offset with 225/45-17 front and 245/40-17.
i just want the fenders rolled so when i lower the car i dont have any major rubbing issues

RyanG · 02-09-2008, 03:17 PM

I would be suprised if there is that much travel to actually need rolling. But we can help of course, but beware the rears dont have much to roll

CHR!S · 02-09-2008, 03:19 PM

Quote:

Originally Posted by AREA1320

I would be suprised if there is that much travel to actually need rolling. But we can help of course, but beware the rears dont have much to roll

well at the moment i do not have my new suspension (still waiting on my bilstein pss9's to arrive). once they do, i will need to have them rolled. im hoping that lowering the car will give the wheels more camber so they dont stick out as much.

you guys can roll the front and the rears though correct?

Signatus230 · 02-09-2008, 03:37 PM

Nah, Ryan can only roll the drive side front fender. Lol. Yea, they can do front and rear. Are you going to have some aggressive alignment done? Also, what wheels + tires you get on there?

edit: I just saw the BBS's. Very nice!

CHR!S · 02-09-2008, 03:46 PM

yea im gonna have the car alligned and everything after i get the suspension installed... thats the only thing thats holding me back at the moment.

bbs RYII's (very rare) with kumho mx's

Cookieman00x · 02-11-2008, 03:44 PM

there was a place in collegeville that did fender rolling... Ill look them up and see if I can find them..

probevette · 02-13-2008, 05:34 PM

Auto Addictions.

CarbonIS · 02-13-2008, 06:04 PM

Ryan @ Area1320 ftw!

Shawn at R/T Tuning also does it

pearl · 02-13-2008, 06:07 PM

rub it until it fits.

Vince@R/TTuning · 02-13-2008, 08:18 PM

actually S2000's dont have much room to work with..they suck like that when it comes to agressive offsets and such..but from the picture u are gonna need more then rollin the fenders make them fit...let us know if we can help ya on the alignment or the rolling...if we do everything here we can check the alignment at the same time we roll the fenders and find a happy medium

02-09-2008, 02:29 PM	#1
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	Anyone know of a shop that does Fender Rolling? I need to get my front & rear fenders rolled on my s2000 so i dont have any problems with rubbing. does anyone know of a shop that i can go to that does a good job? tia

02-09-2008, 02:49 PM	#3
95TurboDC2 Tri-State Addict Join Date: Sep 2006 Location: lansdale Member #2472 My Ride: 06 civic si iTrader: (0)	+1 on r/t tuning. iv seen many cars that they have done. quality work and people to work with. __________________ '96 gsr- sold '95 turbo gsr- sold '06 civic si- present '06 kawasaki 636-present

02-09-2008, 02:50 PM	#4
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	rolling an s?? how low and how huge of tires do you have S's usually can get away with alot __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-09-2008, 03:17 PM	#6
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	I would be suprised if there is that much travel to actually need rolling. But we can help of course, but beware the rears dont have much to roll __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-11-2008, 03:44 PM	#10
Cookieman00x Tri-State Aficionado Join Date: Feb 2007 Location: Upper Gwynedd, PA Member #3625 iTrader: (1)	there was a place in collegeville that did fender rolling... Ill look them up and see if I can find them.. __________________ -== Black 96 Cobra Vert, Built front to back, T-Trim @ 17psi, custom cage ect.. 560rwhp 508rwtq ==- --=Proud Member of the Mid-Atlantic Cobra Association==-

02-09-2008, 02:30 PM	#2
CHAOS TST Ruined My Life! Banned Join Date: Jun 2006 Member #2120 My Ride: 1984 Cadillac Brougham iTrader: (1)	I think area1320 and r/t tuning both do it.

02-09-2008, 03:13 PM	#5
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	im not low at the moment, but once i get suspension ill only be 1.5-2" lower than stock. the wheels & tires are pretty gnarly, got the j's racing specs (except narrower rear tires). the wheels are bbs ryII's 17x8 17x9 +40 offset with 225/45-17 front and 245/40-17. i just want the fenders rolled so when i lower the car i dont have any major rubbing issues

02-09-2008, 03:46 PM	#9
CHR!S Tri-State Post Whore Join Date: May 2005 Member #460 My Ride: 2005 Cadillac CTS-V iTrader: (0)	yea im gonna have the car alligned and everything after i get the suspension installed... thats the only thing thats holding me back at the moment. bbs RYII's (very rare) with kumho mx's

02-13-2008, 05:34 PM	#11
probevette Tri-State Addict Join Date: Jul 2007 Location: Poconos PA Member #5313 My Ride: Slow Audi's iTrader: (2)	Auto Addictions. __________________ Greenway's Car Care Products DipFactory CarbonWerkz

02-13-2008, 06:07 PM	#13
pearl Tri-State Post Whore Join Date: Nov 2005 Location: NEW JERSEY Member #1108 My Ride: suck it trebek iTrader: (0)	rub it until it fits. __________________ Last Activity: 03-24-2009 12:05 PM

02-13-2008, 08:18 PM	#14
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	actually S2000's dont have much room to work with..they suck like that when it comes to agressive offsets and such..but from the picture u are gonna need more then rollin the fenders make them fit...let us know if we can help ya on the alignment or the rolling...if we do everything here we can check the alignment at the same time we roll the fenders and find a happy medium __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fender Rolling	R3dBonez	Suspension, Brakes, Wheels, and Tires	1	09-26-2010 11:02 AM
Fender rolling?	Yes2K	General Car Related Chat	12	11-18-2009 08:48 PM
help fender rolling?	superskaterxes	Networking: requests and offers	0	05-03-2009 05:57 PM
Fender Rolling?	redline	General Car Related Chat	26	05-31-2008 10:29 AM
Fender rolling	WTRacing	Suspension, Brakes, Wheels, and Tires	2	03-20-2008 09:04 PM