exhaust install + weld - TriStateTuners.com :: Home of Tristate Auto Enthusiast

CleanNeon98 · 11-25-2007, 05:01 PM

Parts that need to be installed

Race header
test pipe
mid pipe
rear section

rear section needs to be cut and have a new muffler welded on
front motor mount has to come out for install of header (last I checked)
defouler needs to be made-i dont want a check engine light
one o2 sensor wire may need to be extended to fit the bung (there are 3 bungs and a plug in one of them, if it can be moved, the wire may not need to be extended). one bung in the test pipe 2 in the header, the lower one in the header is closed right now.

all hangers should line up, new ones will need to go on for the new muffler

PM me

Spocknasty · 11-25-2007, 09:23 PM

I need exhaust work done as well. PM me too.

JNZTuning · 11-25-2007, 11:37 PM

PMs sent.

CleanNeon98 · 12-05-2007, 07:20 PM

see first post for updated install info

CleanNeon98 · 12-05-2007, 09:58 PM

come on someone must do this..I need this stuff and test pipe so i can finally turn my car into a track beast ;)

TurboTagTeam · 12-05-2007, 10:31 PM

Quote:

Originally Posted by CleanNeon98

Parts that need to be installed

Race header
test pipe
mid pipe
rear section

rear section needs to be cut and have a new muffler welded on
front motor mount has to come out for install of header (last I checked)
defouler needs to be made-i dont want a check engine light
one o2 sensor wire may need to be extended to fit the bung (there are 3 bungs and a plug in one of them, if it can be moved, the wire may not need to be extended). one bung in the test pipe 2 in the header, the lower one in the header is closed right now.

all hangers should line up, new ones will need to go on for the new muffler

PM me

Unless you get a simulator for the secondary o2 sensor, you will allways throw a code if you run a test pipe.

Also, you reliaze that what you are asking is highly illegal correct? I doubt anyone from a reputable shop is gonna discuss this over the internet. Just walk into a shop and ask someone to do it for you.

CleanNeon98 · 12-28-2007, 03:43 AM

guys what about a simple cut and weld job ill install everything else myself beforehand. someone must be able to do it here

BradC · 12-28-2007, 09:08 AM

Quote:

Originally Posted by TurboTagTeam

Unless you get a simulator for the secondary o2 sensor, you will allways throw a code if you run a test pipe.

Not always true. A defouler works great.

CleanNeon98 · 12-29-2007, 02:40 PM

come on guys i dont trust mineke and them they seem sloppy

pearl · 12-29-2007, 02:43 PM

my boy pete may be able to hook you guys up. pm me if you are willing to drive to my neck of the woods (central NJ/new brunswick area)

CleanNeon98 · 12-29-2007, 03:59 PM

Quote:

Originally Posted by pearl

my boy pete may be able to hook you guys up. pm me if you are willing to drive to my neck of the woods (central NJ/new brunswick area)

If its a good price, Il go down. I trust your judgement.

420sx · 12-29-2007, 04:53 PM

Meineke does a great job for exhaust work for dirt cheap. The one in Doylestown has done right by me many times.

I wouldnt go there for engine work... but they can handle putting an exhaust on, It it'll probably cost you under $200.

CleanNeon98 · 12-29-2007, 05:04 PM

I decided to put it on myself but I still need the rear section welded

11-25-2007, 05:01 PM	#1
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	exhaust install + weld Parts that need to be installed Race header test pipe mid pipe rear section rear section needs to be cut and have a new muffler welded on front motor mount has to come out for install of header (last I checked) defouler needs to be made-i dont want a check engine light one o2 sensor wire may need to be extended to fit the bung (there are 3 bungs and a plug in one of them, if it can be moved, the wire may not need to be extended). one bung in the test pipe 2 in the header, the lower one in the header is closed right now. all hangers should line up, new ones will need to go on for the new muffler PM me __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver Last edited by CleanNeon98; 12-05-2007 at 07:20 PM.

11-25-2007, 09:23 PM	#2
Spocknasty Meh Join Date: Oct 2005 Member #986 iTrader: (5)	I need exhaust work done as well. PM me too. __________________ formerly CRXed To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. I <3 JSC Speed and Liquid Powder Coats!

12-05-2007, 07:20 PM	#4
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	see first post for updated install info __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

12-05-2007, 09:58 PM	#5
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	come on someone must do this..I need this stuff and test pipe so i can finally turn my car into a track beast ;) __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

12-28-2007, 03:43 AM	#7
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	guys what about a simple cut and weld job ill install everything else myself beforehand. someone must be able to do it here __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

11-25-2007, 11:37 PM	#3
JNZTuning Tri-State Addict Join Date: Feb 2007 Location: hatfield, pa Member #3587 My Ride: 2003 Z06,2006 Evo IX, 06 WRX, 1996 Eagle Talon TSI, 2000 MR2 Spyder iTrader: (0)	PMs sent.

12-29-2007, 02:40 PM	#9
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	come on guys i dont trust mineke and them they seem sloppy __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

12-29-2007, 02:43 PM	#10
pearl Tri-State Post Whore Join Date: Nov 2005 Location: NEW JERSEY Member #1108 My Ride: suck it trebek iTrader: (0)	my boy pete may be able to hook you guys up. pm me if you are willing to drive to my neck of the woods (central NJ/new brunswick area) __________________ Last Activity: 03-24-2009 12:05 PM

12-29-2007, 04:53 PM	#12
420sx Tri-State Post Whore Join Date: Oct 2006 Location: Warrington, PA Member #2811 My Ride: '98 240sx, 98 Impreza L, 00 SV650 iTrader: (5)	Meineke does a great job for exhaust work for dirt cheap. The one in Doylestown has done right by me many times. I wouldnt go there for engine work... but they can handle putting an exhaust on, It it'll probably cost you under $200. __________________ loltst

12-29-2007, 05:04 PM	#13
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	I decided to put it on myself but I still need the rear section welded __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How To: Install Exhaust Wrap by Mishimoto	Mishimoto	Mishimoto	8	01-25-2010 03:02 PM
Who can weld my muffler to my exhaust?	Oreo931	Engine Performance	7	07-16-2007 07:50 PM
Anyone have lift for exhaust install?	2drStunner	New Jersey	21	10-31-2006 04:38 PM
Exhaust pipe install.	dancemf666	Engine Performance	10	08-23-2006 11:39 PM
exhaust install needed for my 06 sti	reeksti	Pennsylvania	46	04-27-2006 04:55 PM