[GB] JNZ Tuning SALE on PTE Turbos!!!

[JNZTuning]

This SALE will consist of PTE's 50 trim, 60 trim, and 60-1 turbos {NOT THE GT SERIES (they are on back order with PTE)} in both journal bearing and dual ball bearing center cartridges. These turbos will be offered with either a Mitsu or T3 exhaust housing (internal, external (o2), or external (manifold) wastegate provisions available).

Order online at http://www.jnztuning.com/catalog/ind...ath=239_24_162



PRICING TOO LOW TO PRINT!!! Call for details!!!


50 trim
SC 5031E (journal bearing)
SC 5031RE (dual ball bearing)

Max Rated HP: 450
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race or Dual Ball Bearing
A/R Ratio: .63
Garrett Compressor Wheel Trim: 50
Garrett Turbine Wheel Trim: 76

Garrett Compressor Wheel Specs:
Wheel Trim: 50
Wheel Diameter: 54mm
Wheel Inducer: 2.123"
Wheel Exducer: 3.000"

Garrett Turbine Wheel Specs:
Wheel Trim: 76
Wheel Style: T31 (stage 3)
Wheel Inducer: 2.559"
Wheel Exducer: 2.229"


60 Trim
SC 4431E (journal bearing)
SC 4431RE (dual ball bearing)

Max. Rated HP 565 Horsepower
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race or Dual Ball Bearing
A/R Ratio: .63
Garrett Compressor Wheel Trim: 60
Garrett Turbine Wheel Trim: 76

Garrett Compressor Wheel Specs:
Wheel Trim: 60
Wheel Diameter: 58mm
Wheel Inducer: 2.290"
Wheel Exducer: 2.950"

Garrett Turbine Wheel Specs:
Wheel Trim: 76
Wheel Style: T31 (stage 3)
Wheel Inducer: 2.559"
Wheel Exducer: 2.228"



60-1
SC 6031E (journal bearing)
SC 6031RE (dual ball bearing)

Max Rated HP: 580
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race or Dual Ball Bearing
A/R Ratio: .63
Garrett Compressor Wheel Trim: 60
Garrett Turbine Wheel Trim: 76

Garrett Compressor Wheel Specs:
Wheel Trim: 60
Wheel Diameter: 59mm
Wheel Inducer: 2.320"
Wheel Exducer: 3.000"

Garrett Turbine Wheel Specs:
Wheel Trim: 76
Wheel Style: T31 (stage 3)
Wheel Inducer: 2.559"
Wheel Exducer: 2.228"


Please specify model number and wastegate type (internal vs external) (and location of wastegate if external) when ordering. Please also specify if you want a cut or uncut exhaust housing if you are going with an internal wastegate. You can order online at http://www.jnztuning.com/catalog/ind...ath=239_24_162 or by calling the sales department at 215.997.6850.

[JNZTuning]

ONE week left on this SALE! Take advantage of these insane prices while you can! It won't happen again!!

Call us at 215-997-6850 with any questions!

Chris @ JNZ