Any Nissan ITB Gurus Here? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

wgknestrick · 01-17-2007, 09:00 AM

I need some information about Nissan and how they handle vacuum connections on their ITB turbo engines (RB26DETT and "black top" - I think SR20's).

I basically need to know what they separate from the MAP sensor connections, Do they run speed density?, brake booster, etc. If you have any good links describing their ITB systems that would also be great.

Any help is greatly appreciated for a Subaru guy

Bill

Honest_Bob · 01-17-2007, 09:38 AM

You should be able to find anything about the sr20 at www.sr20forum.com

**Ender81** · 01-18-2007, 01:09 AM

You're like an evil genius

Specnomore · 02-02-2007, 12:35 PM

The only sr20 I know of with ITB's is a Gti-r engine. They still use a maf based system though. Pretty much all the vacuum sources are behing the throttle plates on each port. There are some guys who have converted over to map and speed density, but they used the AEM ems systems.

the mike · 02-06-2007, 11:21 AM

I know the guys that did ITB's on NA KA24 cars used a MegaSquirt to control the engine, and that the MAP was located in the board(provided that I read the writeup correctly). As far as running it on other systems, I have no idea.
They used GSX-R 750/1000 ITB's for the setup and I think they use one port for each fed off a main feed with one fitting on the end. This is where they ran the vacuum for the brake booster as well. I'll try to find the article.

the mike · 02-06-2007, 11:58 AM

Found the write up I was looking for...
http://www.zilvia.net/f/showthread.php?t=91288

http://www.zilvia.net/f/showthread.p...highlight=GSXR

01-17-2007, 09:38 AM	#2
Honest_Bob TST Ruined My Life! Join Date: Dec 2005 Location: Easton, PA Member #1179 My Ride: 05 WRX Wagon iTrader: (2)	You should be able to find anything about the sr20 at www.sr20forum.com __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

02-06-2007, 11:21 AM	#5
the mike TST Ruined My Life! Join Date: Dec 2004 Location: 08075 Member #19 My Ride: 1991 Toyota Previa!!! iTrader: (1)	I know the guys that did ITB's on NA KA24 cars used a MegaSquirt to control the engine, and that the MAP was located in the board(provided that I read the writeup correctly). As far as running it on other systems, I have no idea. They used GSX-R 750/1000 ITB's for the setup and I think they use one port for each fed off a main feed with one fitting on the end. This is where they ran the vacuum for the brake booster as well. I'll try to find the article. __________________ My speed is only limited by my grip. Offramp Touge.

02-06-2007, 11:58 AM	#6
the mike TST Ruined My Life! Join Date: Dec 2004 Location: 08075 Member #19 My Ride: 1991 Toyota Previa!!! iTrader: (1)	Found the write up I was looking for... http://www.zilvia.net/f/showthread.php?t=91288 http://www.zilvia.net/f/showthread.p...highlight=GSXR __________________ My speed is only limited by my grip. Offramp Touge.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Networking Gurus	Xavier	Off-Topic	4	06-27-2010 02:19 PM
itunes gurus	clay	Off-Topic	2	06-02-2010 05:52 PM
FMIC Gurus	PoorMan'sR	Subaru Talk	6	05-19-2010 11:24 AM
Photoshop Gurus...Need Some Help	EvlEgl	Photography	7	10-23-2008 04:21 PM
Q for all you paint gurus out there	slavetothemuzic	Exterior, Interior, and Electrical	5	05-01-2006 01:12 PM

02-02-2007, 12:35 PM	#4
Specnomore Tri-State Addict Join Date: Nov 2006 Location: Bethlehem, PA Member #2910 My Ride: 91 se-r iTrader: (0)	The only sr20 I know of with ITB's is a Gti-r engine. They still use a maf based system though. Pretty much all the vacuum sources are behing the throttle plates on each port. There are some guys who have converted over to map and speed density, but they used the AEM ems systems.