wrx clutch install gone wrong. Help - TriStateTuners.com :: Home of Tristate Auto Enthusiast

sr20tom · 04-21-2010, 10:01 PM

So i did a clutch on my wrx last weekend and what a nightmare it was. When i put it all back together, it sounds like someone threw a bag of skittles in the bell housing, but the sound it synchroed to rpm so it has to be something hitting or rubbing against the flywheel or pressure plate. Car goes in gear and drives just fine. Any ideas?
here is a a vid
http://www.youtube.com/watch?v=nFHeJT_TN68

DPancoast · 04-22-2010, 01:01 AM

does the car make the sound with the clutch pressed in? did you replace the throw out bearing? if so or if you didn't, did you put some lube on the shaft/throw out bearing when you re-installed it?

RyanG · 04-22-2010, 01:23 AM

dust shield on the bottom of the motor is bent and hitting the flywheel.. Bend back and thank me later

**TROLL** · 04-22-2010, 01:28 AM

haha Ryan is right... good call. You got off lucky... just hop under the car and bend the dust shield down a bit, then report back and let us know if that fixed it.

EklipzGSXkid · 04-22-2010, 01:36 AM

Does not need to be said again, But yes.. It's the dust shield. I've run into the same problem a long time ago on my sti after installing my new built motor. Heart dropped literally to the floor when I heard the noise. Then, found that problem. Luckly it was a quick and easy 2 second fix.

Xclusive_Russ · 04-22-2010, 10:45 PM

Quote:

Originally Posted by AREA1320

dust shield on the bottom of the motor is bent and hitting the flywheel.. Bend back and thank me later

So common lol.

05scooby · 04-23-2010, 12:01 AM

so modest lol but true. easy fix

sr20tom · 05-03-2010, 09:39 PM

thax for all the help. blew the skyline up so had to get under the wrx and fix it. That stupid shild. Had to drop the trans in order to bend it back. thanx for all the help

04-21-2010, 10:01 PM	#1
sr20tom Tri-State Training Wheels Join Date: Aug 2009 Member #14451 My Ride: r33 maddness iTrader: (0)	wrx clutch install gone wrong. Help So i did a clutch on my wrx last weekend and what a nightmare it was. When i put it all back together, it sounds like someone threw a bag of skittles in the bell housing, but the sound it synchroed to rpm so it has to be something hitting or rubbing against the flywheel or pressure plate. Car goes in gear and drives just fine. Any ideas? here is a a vid http://www.youtube.com/watch?v=nFHeJT_TN68

04-22-2010, 01:23 AM	#3
RyanG Tri-State Post Whore Join Date: Jan 2005 Location: Easton, PA Member #63 iTrader: (1)	dust shield on the bottom of the motor is bent and hitting the flywheel.. Bend back and thank me later __________________ I am Area1320 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-23-2010, 12:01 AM	#7
05scooby Tri-State Addict Join Date: Sep 2007 Location: Langhorne, PA Member #5723 My Ride: 19 Highlander SE iTrader: (5)	so modest lol but true. easy fix __________________ 05 stg 3 CGM WRX/ sti hybrid SOLD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 04 Mercury Marauder - gone but not forgotten 2019 highlander SE 2021 Highlander XLE moon dust

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAN I get a clutch install next sat???	turbosmac02	(Past Vendors)	1	12-26-2008 01:05 PM
Who Can Install A Clutch?	Willdue	Mitsubishi Talk	21	02-09-2007 08:49 PM
clutch install wrx	blinger	Drivetrain	43	01-26-2007 09:57 PM
Who can install a clutch	silver05bullet	General Car Related Chat	9	12-15-2005 12:14 AM
Clutch install.....	Red3GEclipse	Pennsylvania	8	05-12-2005 09:05 AM

04-22-2010, 01:36 AM	#5
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	Does not need to be said again, But yes.. It's the dust shield. I've run into the same problem a long time ago on my sti after installing my new built motor. Heart dropped literally to the floor when I heard the noise. Then, found that problem. Luckly it was a quick and easy 2 second fix.

05-03-2010, 09:39 PM	#8
sr20tom Tri-State Training Wheels Join Date: Aug 2009 Member #14451 My Ride: r33 maddness iTrader: (0)	thax for all the help. blew the skyline up so had to get under the wrx and fix it. That stupid shild. Had to drop the trans in order to bend it back. thanx for all the help