Hello from Xotic - TriStateTuners.com :: Home of Tristate Auto Enthusiast

SinistiR · 07-19-2006, 01:40 PM

First off I would like to thank Troll for getting us into the vendor forum.

Xotic Motorsports is a tuning facility located in southeastern PA, Cochranville to be exact. We are about 25 min from Wilmington, DE and about 25 min from West Chester, PA. The shop is 2600 sqft, and we have a Dynojet model 248 and 224x mounted infloor. We are able to dyno front wheel drive, rear wheel drive and all wheel drive cars. I can handle just about any job at the shop, from assembling motors, installing differentials to complete engine tuning. When it comes to engine management tuning I have worked with most systems out there, EcuTek, AEM EMS, Utec, Hydra, Emanage, HP tuners, Split Second, FAST, Edlebrock ect. We specialize in Subarus but carry a vast knowledge of other makes, Nissan, VW, Honda, Mitsubishi, DSM just to name a few. We currently do not stock too many items on the shelves, but can have most parts within a few days. So if you are in the market for any type of parts, tuning, installs, or build up give us a call or email and we will see what we can do.

D Money · 07-19-2006, 01:43 PM

+1 for Andy, Ron, and Jimbo at Xotic! See you tomorrow! I would recommend these guys to anyone, they are truely the best.

Tru2Blu · 07-19-2006, 01:59 PM

will soon need forged pistons/rod, any prices? or any prices on a rebuild kit?(forged internals) ka24de motor. thank you.

300zTT · 07-19-2006, 02:17 PM

i hear good things about u guys from subwrxkid (Dimitri) i am in the market for a dyno tune after my nitrous install i have an after market ecu but no safc or anything like that would it be possible to do something?

04wrx · 07-19-2006, 02:21 PM

+2 for xotic! I was very happy with tune

Renegade_ · 07-19-2006, 02:47 PM

Ever tune an SRT4 before? I have a friend which definitely in the market for a tune. If you haven't I'm pretty sure that it isn't any different from normal tunes, just wondering if you have done them before.

KrautFed20V · 07-19-2006, 03:04 PM

have you worked with 034 Motorsport hardware?

also just wondering if you have the ability to custom tune a MoTec ME7.5?

please let me know and get back to me i'm going to need some tuning work done very soon

SinistiR · 07-19-2006, 03:51 PM

Tru2Blu- I will work you up a price on parts and labor for a forged bottom end for that car. Do you need any work done to or parts for the head?

300zTT- I can get your nitrous dialed in on the dyno, as long as you have some different jets with the system, it should not be a problem.

Renegade_- I have tuned about 8 SRTs, with wheell hp between 260-400. I would be more than happy to help out your friend when they are ready.

Kraut- I have not delt with any of the 034 Motorsports stuff before, but I would be able to help you with the Motec tune though.

Tru2Blu · 07-19-2006, 04:09 PM

Quote:

Originally Posted by SinistiR

Tru2Blu- I will work you up a price on parts and labor for a forged bottom end for that car. Do you need any work done to or parts for the head?

im actually picking up the motor today, i want to build both top and bottm end for turboing. so yeah ima need parts for the head too.

CHAOS · 07-19-2006, 07:08 PM

Quote:

Originally Posted by subwrxkid

+1 for Andy, Ron, and Jimbo at Xotic! See you tomorrow! I would recommend these guys to anyone, they are truely the best.

+5 ... these guys have never been anything but great with me and groups ive gone with...

05OCsrt-4 · 07-19-2006, 07:09 PM

welcome to TST, i've never been to your shop, but i've heard only good things

WRXD · 07-19-2006, 09:18 PM

can you do Cobb Protunes???

StreetEG · 07-19-2006, 10:30 PM

yo--- ill be seein a lot more of you in a few weeks. Bump for you biatch

TehWagon · 07-19-2006, 11:07 PM

yay xotic!!! i'm totally going ecutek as soon as i'm settled... mark me down

Omar_MSP · 07-19-2006, 11:49 PM

nice, i'm bout 35mins away... i'll see if i need anything big done to my car, i'll stop by and take a tour of the place...

SinistiR · 07-20-2006, 09:26 AM

Sorry no Protunes.

R33P3R007 · 07-20-2006, 09:35 AM

Woot. HP Tuners... I have been looking for a local shop to tune my car with it.

Pmed...

CHAOS · 07-20-2006, 04:26 PM

Quote:

Originally Posted by Boricua

nice, i'm bout 35mins away... i'll see if i need anything big done to my car, i'll stop by and take a tour of the place...

if you live in and/or around coatesville... it takes 15-20 to get down there ... i do it all the time

StreetEG · 07-20-2006, 09:54 PM

Yo andy--whats your availability---how far in advnace should i book my session?

SinistiR · 07-21-2006, 09:54 AM

3 weeks

07-19-2006, 01:40 PM	#1
SinistiR Tri-State Aficionado Join Date: Dec 2005 Member #1206 iTrader: (0)	Hello from Xotic First off I would like to thank Troll for getting us into the vendor forum. Xotic Motorsports is a tuning facility located in southeastern PA, Cochranville to be exact. We are about 25 min from Wilmington, DE and about 25 min from West Chester, PA. The shop is 2600 sqft, and we have a Dynojet model 248 and 224x mounted infloor. We are able to dyno front wheel drive, rear wheel drive and all wheel drive cars. I can handle just about any job at the shop, from assembling motors, installing differentials to complete engine tuning. When it comes to engine management tuning I have worked with most systems out there, EcuTek, AEM EMS, Utec, Hydra, Emanage, HP tuners, Split Second, FAST, Edlebrock ect. We specialize in Subarus but carry a vast knowledge of other makes, Nissan, VW, Honda, Mitsubishi, DSM just to name a few. We currently do not stock too many items on the shelves, but can have most parts within a few days. So if you are in the market for any type of parts, tuning, installs, or build up give us a call or email and we will see what we can do. Last edited by SinistiR; 07-19-2006 at 01:42 PM.

07-19-2006, 01:59 PM	#3
Tru2Blu Tri-State Addict Join Date: Dec 2005 Location: Hamilton Member #1214 My Ride: 02 Mazda Millenia iTrader: (1)	will soon need forged pistons/rod, any prices? or any prices on a rebuild kit?(forged internals) ka24de motor. thank you. __________________ Quest for a 500awhp daily driven vr4....

07-19-2006, 03:04 PM	#7
KrautFed20V Tri-State Addict Join Date: Oct 2005 Location: Quakertown Member #984 My Ride: 01 GTP & Honda ChitBox iTrader: (0)	have you worked with 034 Motorsport hardware? also just wondering if you have the ability to custom tune a MoTec ME7.5? please let me know and get back to me i'm going to need some tuning work done very soon __________________ -Rob To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

07-19-2006, 10:30 PM	#13
StreetEG Tri-State Post Whore Join Date: Nov 2005 Member #1109 iTrader: (1)	yo--- ill be seein a lot more of you in a few weeks. Bump for you biatch __________________ EscapetheApple.com 20,000 Miles, No Hotels, Every Amazing Road in America

07-19-2006, 11:49 PM	#15
Omar_MSP Tri-State Post Whore Join Date: Jul 2006 Location: Ionno Member #2201 My Ride: MSP iTrader: (0)	nice, i'm bout 35mins away... i'll see if i need anything big done to my car, i'll stop by and take a tour of the place... __________________ Canon Rebel XTI I wonder how much deeper the ocean would be without sponges.

07-19-2006, 02:21 PM	#5
04wrx Tri-State Aficionado Join Date: Dec 2005 Member #1165 iTrader: (1)	+2 for xotic! I was very happy with tune

07-19-2006, 02:47 PM	#6
Renegade_ Tri-State Post Whore Join Date: May 2006 Location: NNJ/NYC Member #1912 My Ride: 1J Swaggon iTrader: (2)	Ever tune an SRT4 before? I have a friend which definitely in the market for a tune. If you haven't I'm pretty sure that it isn't any different from normal tunes, just wondering if you have done them before.

07-19-2006, 03:51 PM	#8
SinistiR Tri-State Aficionado Join Date: Dec 2005 Member #1206 iTrader: (0)	Tru2Blu- I will work you up a price on parts and labor for a forged bottom end for that car. Do you need any work done to or parts for the head? 300zTT- I can get your nitrous dialed in on the dyno, as long as you have some different jets with the system, it should not be a problem. Renegade_- I have tuned about 8 SRTs, with wheell hp between 260-400. I would be more than happy to help out your friend when they are ready. Kraut- I have not delt with any of the 034 Motorsports stuff before, but I would be able to help you with the Motec tune though.

07-19-2006, 09:18 PM	#12
WRXD Tri-State Post Whore Join Date: Dec 2005 Location: SEPA Member #1156 My Ride: 2013 Ford Focus ST iTrader: (0)	can you do Cobb Protunes???

07-20-2006, 09:26 AM	#16
SinistiR Tri-State Aficionado Join Date: Dec 2005 Member #1206 iTrader: (0)	Sorry no Protunes.

07-20-2006, 09:54 PM	#19
StreetEG Tri-State Post Whore Join Date: Nov 2005 Member #1109 iTrader: (1)	Yo andy--whats your availability---how far in advnace should i book my session? __________________ EscapetheApple.com 20,000 Miles, No Hotels, Every Amazing Road in America

07-21-2006, 09:54 AM	#20
SinistiR Tri-State Aficionado Join Date: Dec 2005 Member #1206 iTrader: (0)	3 weeks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Xotic AutoShow: Edison,NJ (nws)	trista	Upcoming Events	12	11-04-2010 03:09 PM
Indoor Meets @ Xotic !!	Ronin Tactical	Upcoming Events	199	02-28-2007 05:18 PM
Xotic Motorsports	CHAOS	Parts and Vendor Reviews	24	12-06-2006 02:52 AM
Just Got Tuned by Andy @ Xotic	Honest_Bob	General Car Related Chat	37	11-19-2006 06:57 PM
Huffrex goes Xotic	HuffRex	Welcome to TriStateTuners	56	12-31-2005 12:57 PM