Aftermarket Sprocket Kits.. Who has them?? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

93EGY8 · 06-30-2009, 03:24 PM

I've been thinking about putting a little bit bigger sprocket on the back of my CBR. I'm just not sure how many teeth i want to add. I don't want to lose my highway rideability, but i want it to be a little easier to clutch up in higher gears, preferrably 2nd or 3rd instead of 1st gear. I was looking at the 54 tooth but dont know if that will make the bike SCREAM on the highways, figured i would ask and see what you guys ride ~post up the type of bike you ride and the sprocket you have as well as some feedback on rideability.~

Thanks!

bluengoldsti · 07-06-2009, 08:07 PM

Not into the whole wheelie thing, but I have -1/+2 (15/45) on my 06 600 with the 520 conversion. Its good for acceleration, but probably not enough teeth if you want to wheelie easier.

Chaos Z · 07-07-2009, 08:56 PM

i went with a vortex 520 kit -1 front +2 rear the rides still good with great pick up only runs about 500-700 rpms higher then it did maybe like 6000rpms at 70mph in 6th cruisin thats on my f4i im sure you could clutch it up in 2nd

Blaise · 07-07-2009, 10:52 PM

I have vortex sprockets. I don't do wheelies. Neither should you. Please.

93EGY8 · 07-08-2009, 01:34 AM

Post didn't say tell me how to ride it said help me with sprockets:/ thanks for all the tips guys I'm definately going with a vortex probably a plus two in back minus one up front

TurboTagTeam · 07-08-2009, 01:46 AM

MotoMummy.com has awesome deals on vortex 520 conversion kits.

I'm most likely going with a -1front and a stock rear since my bike def dosent need a +2 rear as well. It's hard enough to keep on the ground on corner exit.

AMF Racing · 07-08-2009, 02:13 AM

http://www.sumofallparts.net/ they have the kit i want -1 +2 with 520 chain vortex for $160 shipped.

93EGY8 · 07-08-2009, 11:49 AM

wow that deal for 160 shipped sounds awesome. nad im definatley going with the -1 front +2 rear because my bike is a 92, its not as fast as the newer bikes but still holds its own...i just want a little more jump behind it

jpalamar · 07-08-2009, 12:35 PM

I went from Vortex alumium sprockets to Vortex steel sprockets. The weight difference isn't noticable in my accel and its alot stronger. I also have an RK 520 chain. No complaints.

bikebandet.com has kits really cheap for most bikes

z'd up · 07-08-2009, 02:13 PM

bikebandit.com*

93EGY8 · 07-08-2009, 05:15 PM

just checked out bikebandit.com... might actually go with there kits..seem to be a little cheaper.. anyone else on here stunt in shows or on the side??? im personally not ready for comps yet but feel within the next year i will be. vortex seems to be the company to go with, my brother had there aluminum sprocket and it shredded the teeth off within a year, he rides an 03 636... im most likely to go with the steel kit

enigma · 07-08-2009, 06:11 PM

Cheap sprockets can shear or wear much faster, go with vortex.

420sx · 07-11-2009, 04:19 PM

Went from 15-45 to 14-45... big difference. Took about 8mph off the top end but got a lot more fun to ride in the twisties. I recommend it.

z'd up · 07-11-2009, 11:12 PM

haha aftermarket kits for my bike prolly lower the top speed to like 90mph considering it tops out at like 110 now

06-30-2009, 03:24 PM	#1
93EGY8 Tri-State Addict Join Date: Nov 2007 Member #6337 iTrader: (2)	Aftermarket Sprocket Kits.. Who has them?? I've been thinking about putting a little bit bigger sprocket on the back of my CBR. I'm just not sure how many teeth i want to add. I don't want to lose my highway rideability, but i want it to be a little easier to clutch up in higher gears, preferrably 2nd or 3rd instead of 1st gear. I was looking at the 54 tooth but dont know if that will make the bike SCREAM on the highways, figured i would ask and see what you guys ride ~post up the type of bike you ride and the sprocket you have as well as some feedback on rideability.~ Thanks! __________________ -2006 Chevy Silverado 5.3 Vortec Z71, leveling kit and k&n intake - my daily -1982 Chevy Camaro Z-28.. Muncie M22 fine spline, Richmond 4:10's, Flowmaster super 40's, 350 4 bolt, lunati cam, fuelie heads, weiand intake, Barry Grant Demon 750cfm double pumper. +6 on jets ..My one true love lol -1990 bayliner 21ft 5.0 H.O v8 - the floating party

07-08-2009, 01:34 AM	#5
93EGY8 Tri-State Addict Join Date: Nov 2007 Member #6337 iTrader: (2)	Post didn't say tell me how to ride it said help me with sprockets:/ thanks for all the tips guys I'm definately going with a vortex probably a plus two in back minus one up front __________________ -2006 Chevy Silverado 5.3 Vortec Z71, leveling kit and k&n intake - my daily -1982 Chevy Camaro Z-28.. Muncie M22 fine spline, Richmond 4:10's, Flowmaster super 40's, 350 4 bolt, lunati cam, fuelie heads, weiand intake, Barry Grant Demon 750cfm double pumper. +6 on jets ..My one true love lol -1990 bayliner 21ft 5.0 H.O v8 - the floating party

07-08-2009, 02:13 AM	#7
AMF Racing Tri-State Post Whore Join Date: Apr 2005 Location: New Jersey Member #323 iTrader: (2)	http://www.sumofallparts.net/ they have the kit i want -1 +2 with 520 chain vortex for $160 shipped. __________________ CARS-------------------------------BIKES 02 CIVIC SI----------------------- 03 VTR1000 89 XJ--------------------------------79 GS1000 09 PILOT

07-08-2009, 11:49 AM	#8
93EGY8 Tri-State Addict Join Date: Nov 2007 Member #6337 iTrader: (2)	wow that deal for 160 shipped sounds awesome. nad im definatley going with the -1 front +2 rear because my bike is a 92, its not as fast as the newer bikes but still holds its own...i just want a little more jump behind it __________________ -2006 Chevy Silverado 5.3 Vortec Z71, leveling kit and k&n intake - my daily -1982 Chevy Camaro Z-28.. Muncie M22 fine spline, Richmond 4:10's, Flowmaster super 40's, 350 4 bolt, lunati cam, fuelie heads, weiand intake, Barry Grant Demon 750cfm double pumper. +6 on jets ..My one true love lol -1990 bayliner 21ft 5.0 H.O v8 - the floating party

07-08-2009, 12:35 PM	#9
jpalamar TST Ruined My Life! Join Date: May 2009 Location: Orefield, PA Member #13773 My Ride: '14 Mustang GT iTrader: (3)	I went from Vortex alumium sprockets to Vortex steel sprockets. The weight difference isn't noticable in my accel and its alot stronger. I also have an RK 520 chain. No complaints. bikebandet.com has kits really cheap for most bikes __________________ 2014 Mustang GT performance package, M6, Brembo brakes, Torsen diff with 3.73, Steeda CAI with 101mm MAF, ST coilovers with caster/camber plates, BMR lower control arms, BMR watts link, BMW sway bars with end links, front brake cooling ducts, SR short shiffter, and custom tuned

07-06-2009, 08:07 PM	#2
bluengoldsti Tri-State Aficionado Join Date: Oct 2005 Location: Langhorne, PA Member #969 My Ride: 2005 Subaru STi / 2006 and 2008 Suzuki GSXR600, 2010 KTM SMC 690 iTrader: (0)	Not into the whole wheelie thing, but I have -1/+2 (15/45) on my 06 600 with the 520 conversion. Its good for acceleration, but probably not enough teeth if you want to wheelie easier.

07-07-2009, 08:56 PM	#3
Chaos Z Tri-State Aficionado Join Date: Aug 2007 Location: Parkesburg Member #5491 My Ride: 92 300zx tt, 02 wrx iTrader: (1)	i went with a vortex 520 kit -1 front +2 rear the rides still good with great pick up only runs about 500-700 rpms higher then it did maybe like 6000rpms at 70mph in 6th cruisin thats on my f4i im sure you could clutch it up in 2nd

07-07-2009, 10:52 PM	#4
Blaise Tri-State Addict Join Date: Apr 2005 Location: Drexel Hill Member #304 My Ride: station wagon iTrader: (0)	I have vortex sprockets. I don't do wheelies. Neither should you. Please.

07-08-2009, 01:46 AM	#6
TurboTagTeam Tri-State Post Whore Banned Join Date: Mar 2005 Location: Cell Block F Member #275 My Ride: constantly changes iTrader: (2)	MotoMummy.com has awesome deals on vortex 520 conversion kits. I'm most likely going with a -1front and a stock rear since my bike def dosent need a +2 rear as well. It's hard enough to keep on the ground on corner exit.

07-08-2009, 02:13 PM	#10
z'd up Tri-State Addict Join Date: Mar 2007 Location: Gap, PA Member #3985 My Ride: 2002 Honda CBR 954rr, 94 Astro shaggin wagon iTrader: (0)	bikebandit.com* __________________ aim: NOSSKYLINE88 Xbox live: HoofHearted 88 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. ^ADD ME^

07-08-2009, 05:15 PM	#11
93EGY8 Tri-State Addict Join Date: Nov 2007 Member #6337 iTrader: (2)	just checked out bikebandit.com... might actually go with there kits..seem to be a little cheaper.. anyone else on here stunt in shows or on the side??? im personally not ready for comps yet but feel within the next year i will be. vortex seems to be the company to go with, my brother had there aluminum sprocket and it shredded the teeth off within a year, he rides an 03 636... im most likely to go with the steel kit __________________ -2006 Chevy Silverado 5.3 Vortec Z71, leveling kit and k&n intake - my daily -1982 Chevy Camaro Z-28.. Muncie M22 fine spline, Richmond 4:10's, Flowmaster super 40's, 350 4 bolt, lunati cam, fuelie heads, weiand intake, Barry Grant Demon 750cfm double pumper. +6 on jets ..My one true love lol -1990 bayliner 21ft 5.0 H.O v8 - the floating party

07-08-2009, 06:11 PM	#12
enigma Tri-State Addict Join Date: Oct 2006 Location: Glenolden ,PA Member #2659 My Ride: Hoopties galore iTrader: (0)	Cheap sprockets can shear or wear much faster, go with vortex. __________________ 2001 Dakota Quad Cab, 1996 Ford F250, 1993 Honda Civic, 1991 Eagle Talon, 1970 Plymouth Duster.

07-11-2009, 04:19 PM	#13
420sx Tri-State Post Whore Join Date: Oct 2006 Location: Warrington, PA Member #2811 My Ride: '98 240sx, 98 Impreza L, 00 SV650 iTrader: (5)	Went from 15-45 to 14-45... big difference. Took about 8mph off the top end but got a lot more fun to ride in the twisties. I recommend it. __________________ loltst

07-11-2009, 11:12 PM	#14
z'd up Tri-State Addict Join Date: Mar 2007 Location: Gap, PA Member #3985 My Ride: 2002 Honda CBR 954rr, 94 Astro shaggin wagon iTrader: (0)	haha aftermarket kits for my bike prolly lower the top speed to like 90mph considering it tops out at like 110 now __________________ aim: NOSSKYLINE88 Xbox live: HoofHearted 88 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. ^ADD ME^