Performance/Exhuast/Montco/Cheap?!?! - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Sid · 05-13-2005, 01:50 AM

Hey, anyone know of a performance and/or exhaust shop in Montgomery County (or 20+/- minutes from Lansdale) that would weld an O2 bung into my header for CHEAP? The local Heineke wants ABOUT $40. Is this reasonable?
Also, if anyone has a lift at their disposal....................bwahahaha!
Thanks in advance.

SexyDSM95 · 05-13-2005, 10:46 AM

For $40 that is actually a good deal, consdering that a decent welders time can range from $80-90/hour. I also know a guy who has a shop in Hatfield which is a stones throw away from you. Check out:
JMFabrications.com

Very nice guy deals with a lot of DSM's and has done much side work for VW's and other cars of that sort. As for price, it may be the same if not a tad cheaper.

Sid · 05-13-2005, 11:57 AM

Thanks Sexy! Will check it out.

Sid · 05-14-2005, 01:55 AM

Hot diggity! 25 smackers. And if he's a good as you say, that's really a bargain. Now I just gotta find time to get it to him-he's at the shop 6p-10p while I work 3-midnight. BOO!

Thanks for the hookup, Sandra.

Sid · 08-29-2005, 01:29 AM

Hey Sexy! Finally made it up to Jim's new shop. Creepy location, but seems like a very cool guy. Got to BSing with him a bit, talked about maybe getting some Mazda's in there either for fabbing up some stuff or just to buy some sh*t off him. Figured I'd help the locals out.
Thanks again for the referral.

88TSI_Rob · 08-29-2005, 11:41 PM

I've worked with Jim as well, he did the IC pipes on my car. He's a great guy. I'd recommend him to anyone in the area.

SexyDSM95 · 08-29-2005, 11:48 PM

Quote:

Originally Posted by Sid

Hey Sexy! Finally made it up to Jim's new shop. Creepy location, but seems like a very cool guy. Got to BSing with him a bit, talked about maybe getting some Mazda's in there either for fabbing up some stuff or just to buy some sh*t off him. Figured I'd help the locals out.
Thanks again for the referral.

No problem, I am glad you guys could figure something out! I hope ya just told him my name as a reference since I promised to get him business. I agree with Rob though he is definatley a good guy and a great welder. He is the one who put together my "Super Secret Setup" and is also a very honest guy. Were you the guy who needed a high-flo cat?

Sid · 08-30-2005, 01:40 AM

Quote:

Originally Posted by SexyDSM95

No problem, I am glad you guys could figure something out! I hope ya just told him my name as a reference since I promised to get him business. I agree with Rob though he is definatley a good guy and a great welder. He is the one who put together my "Super Secret Setup" and is also a very honest guy. Were you the guy who needed a high-flo cat?

Of course I dropped your name!
No hi-flow, though. Having a second O2 bung welded into a header.
Also trying to throw him some business from my Mazda club. And will prolly buy one of his overflow tanks.

05-13-2005, 01:50 AM	#1
Sid Tri-State Aficionado Join Date: Apr 2005 Location: Lansdale,PA Member #366 iTrader: (0)	Performance/Exhuast/Montco/Cheap?!?! Hey, anyone know of a performance and/or exhaust shop in Montgomery County (or 20+/- minutes from Lansdale) that would weld an O2 bung into my header for CHEAP? The local Heineke wants ABOUT $40. Is this reasonable? Also, if anyone has a lift at their disposal....................bwahahaha! Thanks in advance. __________________ 2001 Dodge Ram 2500 Laramie SLT Quad-Cab To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

05-13-2005, 11:57 AM	#3
Sid Tri-State Aficionado Join Date: Apr 2005 Location: Lansdale,PA Member #366 iTrader: (0)	Thanks Sexy! Will check it out. __________________ 2001 Dodge Ram 2500 Laramie SLT Quad-Cab To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

05-14-2005, 01:55 AM	#4
Sid Tri-State Aficionado Join Date: Apr 2005 Location: Lansdale,PA Member #366 iTrader: (0)	Hot diggity! 25 smackers. And if he's a good as you say, that's really a bargain. Now I just gotta find time to get it to him-he's at the shop 6p-10p while I work 3-midnight. BOO! Thanks for the hookup, Sandra. __________________ 2001 Dodge Ram 2500 Laramie SLT Quad-Cab To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

08-29-2005, 01:29 AM	#5
Sid Tri-State Aficionado Join Date: Apr 2005 Location: Lansdale,PA Member #366 iTrader: (0)	Hey Sexy! Finally made it up to Jim's new shop. Creepy location, but seems like a very cool guy. Got to BSing with him a bit, talked about maybe getting some Mazda's in there either for fabbing up some stuff or just to buy some sht off him. Figured I'd help the locals out. Thanks again for the referral. __________________ 2001 Dodge Ram 2500 Laramie SLT Quad-Cab To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.*

08-29-2005, 11:41 PM	#6
88TSI_Rob Tri-State Aficionado Join Date: Jun 2005 Location: NE Philly Member #547 iTrader: (1)	I've worked with Jim as well, he did the IC pipes on my car. He's a great guy. I'd recommend him to anyone in the area. __________________ 2005 Subaru LGT 1988 Chrysler Conquest TSI 1987 Dodge Raider Turbo

05-13-2005, 10:46 AM	#2
SexyDSM95 Tri-State Post Whore Banned Join Date: Feb 2005 Location: Glenside, PA Member #188 iTrader: (1)	For $40 that is actually a good deal, consdering that a decent welders time can range from $80-90/hour. I also know a guy who has a shop in Hatfield which is a stones throw away from you. Check out: JMFabrications.com Very nice guy deals with a lot of DSM's and has done much side work for VW's and other cars of that sort. As for price, it may be the same if not a tad cheaper.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new exhuast for the S2K	04 Turbo Spec	Gallery	13	06-05-2006 08:35 PM