Pic of the FB - TriStateTuners.com :: Home of Tristate Auto Enthusiast

mazda6guy · 01-10-2005, 12:17 AM

[/img]

Here is the pic of my 1st Gen RX-7. She is still a work in progress.

teh DIRT · 01-10-2005, 12:25 AM

hotness. i saw a sweet vid of a first gen just like that.

the mike · 01-10-2005, 12:45 AM

Clean and straight, that's all that matters. I saw one down the street from me today. Not that clean though.

WKderF · 01-10-2005, 02:24 AM

makes for a good sleeper. how far along are you with your work?

mazda6guy · 01-10-2005, 06:44 AM

At the moment I have the carb rebuilt. I am now waiting on the engine rebuild kit to come in from the west coast. This week I am starting to perform a street port on the intake and exhaust. It runs still but I am trying to get reliability out of her. I am doing all this on a motor that I plucked form the junkyard. I got the RX-7 for 500 bucks from a guy off of rx7club.com. It smoked really bad but I fixed that because of the intake o-rings was shot. Thanks for the props guys.

Vypurr · 01-10-2005, 03:17 PM

I don't really like the looks of the car

, but I respect its ability!

Zeropistonz · 01-10-2005, 03:23 PM

pretty! Where you buy the rebuild kit? I pieced mine together from various places, rotary aviation, mazdatrix, atkins, ect. Saved alot of cash. Goodluck w/ the project. If you need any help let me know. Me and a few friends can help ya out if your stuck as we have taken apart/put together many a rotary.

mazda6guy · 01-10-2005, 07:30 PM

Well I purchased mine from Atkins but really wanted one from Rotaryaviation because of there Viton o-rings that come with their kits. They did not have a kit for a 12a in their inventory. I might needs some a help so I will give you a holla. Do you know how to perform a street port on the rotary engine Zeropistonz?

MuddyREX · 01-10-2005, 08:49 PM

Mazda6Guy has the best avatar on these boards.

mazda6guy · 01-10-2005, 08:51 PM

OK here is my other project car. Plan on adding a turbo to it once I pull the engine for a fresh rebuild. I have 165,000 miles on it and i think it is overdue for it. Another money pit.

[/img]

teh DIRT · 01-10-2005, 08:53 PM

b-e-a....utiful

Vypurr · 01-10-2005, 09:04 PM

Can I borrow one? Just for a day. I promise I will be gentile, and give it lots of gas!!!

Zeropistonz · 01-11-2005, 12:26 AM

I just bought an aggressive street porting template from a guy named judge ito off of nopistions.com. When i'm done porting my engine you can borrow the template and my dremal and carbide bits if you'd like. Just as long as i get them back you know ;) . I'm sure we'll meet up at a meet some time. Theres a great section on porting on nopistions.com. I'd read every bit of it before I'd start cutting.

mazda6guy · 01-11-2005, 07:03 AM

Man I can see that we are going to become good pals. Thanks for the helping hand and maybe I can come up to your place and learn a few things about the Almighty Wankel from you.

kef · 01-24-2005, 02:56 PM

nice, I've always liked the fb.

01-10-2005, 12:17 AM	#1
mazda6guy Tri-State Aficionado Join Date: Jan 2005 Location: Aberdeen, Maryland Member #92 iTrader: (0)	Pic of the FB [/img] Here is the pic of my 1st Gen RX-7. She is still a work in progress. __________________ "Ugly doesn't matter if it passes tech!" "Speed is nothing unless you know what to do with it!"

01-10-2005, 12:45 AM	#3
the mike TST Ruined My Life! Join Date: Dec 2004 Location: 08075 Member #19 My Ride: 1991 Toyota Previa!!! iTrader: (1)	Clean and straight, that's all that matters. I saw one down the street from me today. Not that clean though. __________________ My speed is only limited by my grip. Offramp Touge.

01-10-2005, 06:44 AM	#5
mazda6guy Tri-State Aficionado Join Date: Jan 2005 Location: Aberdeen, Maryland Member #92 iTrader: (0)	At the moment I have the carb rebuilt. I am now waiting on the engine rebuild kit to come in from the west coast. This week I am starting to perform a street port on the intake and exhaust. It runs still but I am trying to get reliability out of her. I am doing all this on a motor that I plucked form the junkyard. I got the RX-7 for 500 bucks from a guy off of rx7club.com. It smoked really bad but I fixed that because of the intake o-rings was shot. Thanks for the props guys. __________________ "Ugly doesn't matter if it passes tech!" "Speed is nothing unless you know what to do with it!"

01-10-2005, 03:23 PM	#7
Zeropistonz Tri-State Addict Join Date: Jan 2005 Location: Philly burbs Member #90 My Ride: Spinning Doritos iTrader: (0)	pretty! Where you buy the rebuild kit? I pieced mine together from various places, rotary aviation, mazdatrix, atkins, ect. Saved alot of cash. Goodluck w/ the project. If you need any help let me know. Me and a few friends can help ya out if your stuck as we have taken apart/put together many a rotary. __________________ ===The Replacement For Displacement=== 93' FD (Rx-7) 91' FC (Rx-7) 05' FE (Rx-8)

01-10-2005, 07:30 PM	#8
mazda6guy Tri-State Aficionado Join Date: Jan 2005 Location: Aberdeen, Maryland Member #92 iTrader: (0)	Well I purchased mine from Atkins but really wanted one from Rotaryaviation because of there Viton o-rings that come with their kits. They did not have a kit for a 12a in their inventory. I might needs some a help so I will give you a holla. Do you know how to perform a street port on the rotary engine Zeropistonz? __________________ "Ugly doesn't matter if it passes tech!" "Speed is nothing unless you know what to do with it!"

01-10-2005, 02:24 AM	#4
WKderF Tri-State Post Whore Join Date: Dec 2004 Location: Philadelphia Member #30 My Ride: Taste The Beast iTrader: (2)	makes for a good sleeper. how far along are you with your work?

01-10-2005, 08:49 PM	#9
MuddyREX Tri-State Post Whore Join Date: Jan 2005 Location: Perkasie, PA Member #82 My Ride: 02 Subaru WRX iTrader: (4)	Mazda6Guy has the best avatar on these boards. __________________ The original, since 1979. <---- 190,000 mile WRX - Gone To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-10-2005, 08:51 PM	#10
mazda6guy Tri-State Aficionado Join Date: Jan 2005 Location: Aberdeen, Maryland Member #92 iTrader: (0)	OK here is my other project car. Plan on adding a turbo to it once I pull the engine for a fresh rebuild. I have 165,000 miles on it and i think it is overdue for it. Another money pit. [/img] __________________ "Ugly doesn't matter if it passes tech!" "Speed is nothing unless you know what to do with it!"

01-11-2005, 12:26 AM	#13
Zeropistonz Tri-State Addict Join Date: Jan 2005 Location: Philly burbs Member #90 My Ride: Spinning Doritos iTrader: (0)	I just bought an aggressive street porting template from a guy named judge ito off of nopistions.com. When i'm done porting my engine you can borrow the template and my dremal and carbide bits if you'd like. Just as long as i get them back you know ;) . I'm sure we'll meet up at a meet some time. Theres a great section on porting on nopistions.com. I'd read every bit of it before I'd start cutting. __________________ ===The Replacement For Displacement=== 93' FD (Rx-7) 91' FC (Rx-7) 05' FE (Rx-8)

01-11-2005, 07:03 AM	#14
mazda6guy Tri-State Aficionado Join Date: Jan 2005 Location: Aberdeen, Maryland Member #92 iTrader: (0)	Man I can see that we are going to become good pals. Thanks for the helping hand and maybe I can come up to your place and learn a few things about the Almighty Wankel from you. __________________ "Ugly doesn't matter if it passes tech!" "Speed is nothing unless you know what to do with it!"

01-24-2005, 02:56 PM	#15
kef Tri-State Aficionado Join Date: Jan 2005 Location: ./ Member #121 iTrader: (0)	nice, I've always liked the fb.