Honda ECU Charts 89-04 by Hondata

[scott8989]

saw this and decided to post it here so people dont have to look far to figure what ecu is compatible with their application. found this on the hondata site


This is a list of suitable ECUs by engine type, listed in order of ECU preference. Note that some ECUs will be a different generation from the wiring in the vehicle which the engine was originally sold in, and will require an adapter harness (note 6) and/or OBDI ECU swap (note 7). Some vehicles may need additional wiring for the VTEC and knock circuitry. Generally any vehicle after 1995 will require an adapter harness and any F or H series engine will require an ECU swap.


1989-2001

Engine Year Country VTEC IAB Knock Suitable ECUs Hondata Systems Notes

B16A 89-91 JDM Y Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,5,9,10,18

B16A 92-95 JDM Y Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,18

B16A 92-95 US Y Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,18

B16A 99-00 US Y Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,6,7,18

B17A 93 US Y Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,18

B18A 92-93 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,18

B18B 94 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,18

B18B 95 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,18

B18B 96 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,6,7,18

B18C 94-95 US Y Y Y P72,P28,P30,P61,P72J,P30J,P08J s100,s200, s300 2,4,18

B18C 96-00 US Y Y Y P72,P28,P30,P61,P72J,P30J,P08J s100,s200, s300 2,4,6,7,18

B18C5 97-01 US Y Y P72,P30,P28,P61,P72J,P30J,P08J s100,s200, s300 2,6,7,18

B18CSpecR 96-00 JDM Y Y P72,P30,P28,P61,P72J,P30J,P08J s100,s200, s300 2,6,7,18

D15B 92-93 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,3,18

D15B 96 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,3,6,7,18

D15B 92-95 JDM P72,P30,P28,P61,P08J,P30J,P72J s100,s200, s300 2,3,18

D16B 96-99 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,6,7,18

D16A1 88-89 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,7,9,18

D16B 99-00 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,6,7,18

D16Z 92-95 US Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,18

D16Z 96-99 US Y P28,P30,P72,P61,P08J,P30J,P72J s100,s200, s300 2,6,7,18

F22 90-95 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,3,7,11,18

H23A 92-95 US P74,P75,P06,PR4,P28,P30,P72,P61 s100,s200, s300 2,3,7,18

H22A 92-95 US Y Y Y P72,P28,P30,P61,P08J,P30J,P72J s100,s200, s300 2,4,7,18

H22A 96-00 US Y Y Y P72,P28,P30,P61,P08J,P30J,P72J s100,s200, s300 2,4,6,7,8,18

D17 (all) 01-05 All Not supported Not supported

F20c 00-04 All Not supported Not supported

F22c 05-06 All Not supported Not Supported


2002-2004


Engine Year Country VTEC IAB Reverse Lock Knock Suitable ECUs Hondata Systems Notes

K20A 02-04 JDM Y Y Y PRC,PRB,PRD,PNF,PND,PPA k100, K-Pro 16,17

K20A2 02-04 US Y Y Y PRB,PRC,PRD,PNF,PND,PPA Reflash, k100, K-Pro 16,17

K20A2 02-04 UK Y Y Y PRA k100, K-Pro 15,16

K20A3 02-04 US Y Y Y PND,PRC,PRB,PRD,PNF,PPA Reflash, k100, K-Pro 13,16,17
RSX

K20A3SI 02-04 US Y Y PNF,PRC,PRB,PRD,PND,PPA Reflash, k100, K-Pro 16,17

K20Z1 05-06 US Y Y Y PRB Reflash, K-Pro 17
(conversion harness and 02-04 ecu required for K-Pro)

K24 02-04 US Y Y Y PPA,PRC,PRB,PRD,PNF,PND k100, K-Pro 16,17



Notes

1. Hondata s100/s200 and Stage 2/3/4 systems are both available for these OBDI ECUs but it is recommended to use the s100 or
s200 systems.
2. Manual transmissions only.
3. P28,P30,P72,P61 ECUs configured to run non-VTEC.
4. Secondary intake runner operation will be lost if a P72 ECU is not used.
5. To use a Hondata system it is required that an OBDI ECU is used. Note an OBD1 distributor must be used.
6. OBDII to OBDI adapter harness required.
7. OBDI ECU swap.
8. Differential control will be lost.
9. Conversion from OBD1 required (OBD0-OBD1 adapter harness, OBD1 distributor).
10. 4 wire oxygen sensor must be wired in and used if you wish to run in closed loop.
11. 94 and 95 Accords have EGR (A11) and the O2 heating (A6) reversed and must be rewired
12. If this ECU is used with a 6 speed transmission, reverse lockout will not work.
13. PND A5# can be used only with Automatic transmissions and only reflash programs are available for this ECU.
14. Use of this ECU is only recommended for motor swaps, as we do not offer any programs for the CRV.
15. This ECU does not use a wideband oxygen sensor and is not compatible with US or JDM vehicles
16. Only Manual ECU's can be used with the K-Pro
17. PRB-A13 ECU's are not or K-Pro compatible (2005 RSX).
18. The s300 will not work with a JDM case ecu.


hope this helps someone and here is the link to the site and all the info i just posted

http://www.hondata.com/engines.html

[scott8989]

and for some reason it wont let me post it how i told it to post so it makes this a completely useless thread. just click the link to see how its setup