Hey Everyone! Especially DOWNINGTOWN Peeps haha - TriStateTuners.com :: Home of Tristate Auto Enthusiast

98Z28camarojg · 12-01-2010, 12:19 AM

Hey everyone my names John. For those in Downintown on here (Junior w/ the silver EVO X) this is John from Mike's Service with the black camaro, we talked the past week sometime. Thanks for introducing me to the forum!

It's good to be a member on another forum. I always like joining another family of car enthusiasts. For those on here that are on ls1tech.com or ls1.com my name there is also 98z28camarojg, nice to see you again! I'm definitely excited to start talking with you all and swapping experience.

As for my car, i have a Black 1998 Camaro Z28. My mods are as follows.

142k miles, K&N Air Intake, 85mm MAF, Koni Single Adjustable Front Shocks, Bilstein Non-Adjustable Rear Shocks, Thicker Sway Bars, 3-Point Sub Frame Connectors's, B&M Ripper Shifter, Centerforce Stage 2 Clutch, Fidanza Aluminum Flywheel, Pacesetter Race Long Tube Headers, Texas Speed Performance Off Road Y-Pipe, Loudmouth 1 Cat-Back Exhaust, Removed EGR, Removed AIR, Removed A/C Belt, Poly Tranny and Torque Arm Mounts, 335rwhp/350ft.lbs. before installing the LS6 Intake Manifold, P+P TB w/ Half-Shaft Bump-Stop TB-Bypass and Epoxy Mods.

Should be getting a new dyno with 2 weeks, will let you know what the new numbers are!

ASIAN JUL · 12-01-2010, 12:50 AM

Welcome to the site, John!

05OCsrt-4 · 12-01-2010, 01:14 AM

welome, junior knows everyone in the dtown area

i_ride_fieroGT · 12-01-2010, 01:41 AM

yo john whats up dude welcome.... Lol GET MY CAR DONE

just kiddin dude. i'll probabley stop up at mikes tomorrow to put the licence plate on it.. i finaly got approved for classic insurance on it.

OutToWinPAHC · 12-01-2010, 02:01 AM

Texas speed makes y pipes? Never knew that, good info because they sell quality parts... and their cam grinds are awesome.

05Accent · 12-01-2010, 12:09 PM

welcome to tst.

98Z28camarojg · 12-02-2010, 02:31 AM

Get that fiero rustbucket outta my shop! lol

Texas Speed does make y-pipes. they are great too, full 3 inches, at least for my car.

Thanks for the invite again junior, we have to line em up when i get my car tuned haha

12-01-2010, 12:19 AM	#1
98Z28camarojg Tri-State Training Wheels Join Date: Dec 2010 Location: Downingtown, PA Member #18568 My Ride: 1998 Camaro Z28 iTrader: (0)	Hey Everyone! Especially DOWNINGTOWN Peeps haha Hey everyone my names John. For those in Downintown on here (Junior w/ the silver EVO X) this is John from Mike's Service with the black camaro, we talked the past week sometime. Thanks for introducing me to the forum! It's good to be a member on another forum. I always like joining another family of car enthusiasts. For those on here that are on ls1tech.com or ls1.com my name there is also 98z28camarojg, nice to see you again! I'm definitely excited to start talking with you all and swapping experience. As for my car, i have a Black 1998 Camaro Z28. My mods are as follows. 142k miles, K&N Air Intake, 85mm MAF, Koni Single Adjustable Front Shocks, Bilstein Non-Adjustable Rear Shocks, Thicker Sway Bars, 3-Point Sub Frame Connectors's, B&M Ripper Shifter, Centerforce Stage 2 Clutch, Fidanza Aluminum Flywheel, Pacesetter Race Long Tube Headers, Texas Speed Performance Off Road Y-Pipe, Loudmouth 1 Cat-Back Exhaust, Removed EGR, Removed AIR, Removed A/C Belt, Poly Tranny and Torque Arm Mounts, 335rwhp/350ft.lbs. before installing the LS6 Intake Manifold, P+P TB w/ Half-Shaft Bump-Stop TB-Bypass and Epoxy Mods. Should be getting a new dyno with 2 weeks, will let you know what the new numbers are! __________________ K&N Int., Koni Front Shocks, Bilstein Rear Shocks, Thicker Sway Bars, SFC's, B&M Shifter, Centerforce Clutch, Fidanza Flywheel, Pacesetter LT's, TSP ORY, LM1 Cat-Back, Removed EGR AIR and A/C Belt, LS6 Int. Man., P+P TB, K&N Intake, 355rwhp/366ft.lbs.

12-02-2010, 02:31 AM	#7
98Z28camarojg Tri-State Training Wheels Join Date: Dec 2010 Location: Downingtown, PA Member #18568 My Ride: 1998 Camaro Z28 iTrader: (0)	Get that fiero rustbucket outta my shop! lol Texas Speed does make y-pipes. they are great too, full 3 inches, at least for my car. Thanks for the invite again junior, we have to line em up when i get my car tuned haha __________________ K&N Int., Koni Front Shocks, Bilstein Rear Shocks, Thicker Sway Bars, SFC's, B&M Shifter, Centerforce Clutch, Fidanza Flywheel, Pacesetter LT's, TSP ORY, LM1 Cat-Back, Removed EGR AIR and A/C Belt, LS6 Int. Man., P+P TB, K&N Intake, 355rwhp/366ft.lbs.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where my hip hop peeps at?	driftingrx5.7	Off-Topic	46	09-10-2007 10:44 PM
met ct peeps in jersey b4	rocco	Connecticut	1	06-23-2007 05:49 PM
pa,nj,md,de. peeps join me!!!	sappysport215	New Jersey	0	06-14-2007 09:45 PM

12-01-2010, 01:41 AM	#4
i_ride_fieroGT Tri-State Post Whore Banned Join Date: Jan 2009 Location: all over Member #10595 My Ride: Does not hit mivec anymore.(DD) 06 solstice 5 speed. 84 IMSA Fiero5 speed. 87 Fiero GT 5 speed iTrader: (0)	yo john whats up dude welcome.... Lol GET MY CAR DONE just kiddin dude. i'll probabley stop up at mikes tomorrow to put the licence plate on it.. i finaly got approved for classic insurance on it.

12-01-2010, 02:01 AM	#5
OutToWinPAHC Tri-State Post Whore Join Date: Jun 2007 Location: Tokelau Member #5081 My Ride: R33 GTS25T, RHD E46, Truck, part R32 GTR iTrader: (2)	Texas speed makes y pipes? Never knew that, good info because they sell quality parts... and their cam grinds are awesome.