Dyno Pricing - TriStateTuners.com :: Home of Tristate Auto Enthusiast

JCAUTO · 07-31-2009, 05:00 PM

We have a Mustang 500-SE AWD dyno in-house. There is Wideband O2 reading available. The pricing is as follows for 3 pulls w/ wb02:

AWD - $75.00
2WD - FWD/RWD - $60.00

Tuning pricing will depend on the software being used. Please call for pricing.

Anyone that knows about dynos, knows that Mustang Dyno's give real world numbers. Mustang dyno's offer load based (Eddy's) readings to simulate real-world conditions. Power is graphed how it is in real world conditions (street/track). Other dynos are not load bearing (free rolling dynos).

Here is a link for more info on our specific dyno:http://www.mustangdyne.com/MDAWD500SE.htm
Hope to see some of you guys soon.

99SL2_Modder · 08-06-2009, 11:35 PM

Question on your tune software.

What in-house software, if any, do you have and utilize? What software are you familiar with?

For instance, Megasquirt running various codes including MSnS-e and MSnS-e2; VCM (HPTuners); SDS; TEC; etc etc.

Specifically, if you have VCM and GM v6 Car credits.

**TROLL** · 08-07-2009, 02:12 AM

Hey, glad you posted this... its awesome to have an AWD dyno so close... I'm gonna have to get in touch to talk to you guys about it.

SpendOne · 08-07-2009, 01:29 PM

No problem Bryan. let me know.

99SL2_Modder · 08-07-2009, 08:32 PM

Quote:

Originally Posted by SpendOne

No problem Bryan. let me know.

By chance get a list of software up for my question?

I'm really hoping to get a baseline run in sometime soon. As in, really soon.

JCAUTO · 08-20-2009, 09:04 AM

hptuners
dsmlink
megasquirt
sds
aem
neptune

empera · 08-20-2009, 09:09 AM

Price on full tune on AEM?

JCAUTO · 08-20-2009, 11:06 AM

pm sent

Vypurr · 08-20-2009, 11:15 AM

Discount Dyno-Day? Group rates?

JCAUTO · 08-20-2009, 11:30 AM

We will be having a dyno-day soon just geting the shop together first.
I will post when that is after we are setup. pm me an we can go over group rates.

full-cruise · 08-24-2009, 02:20 PM

microtech turbo rotary?

JCAUTO · 08-24-2009, 07:11 PM

do you have the system already or do you need one. An if you have one is it lt8 or 10

full-cruise · 08-29-2009, 10:59 AM

im running the lt8s rite now that i would need tuned. iv played a bit with it to brake the motor in but i need it tuned for boost.

07-31-2009, 05:00 PM	#1
JCAUTO Tri-State Training Wheels Join Date: Jul 2009 Member #14255 iTrader: (0)	Dyno Pricing We have a Mustang 500-SE AWD dyno in-house. There is Wideband O2 reading available. The pricing is as follows for 3 pulls w/ wb02: AWD - $75.00 2WD - FWD/RWD - $60.00 Tuning pricing will depend on the software being used. Please call for pricing. Anyone that knows about dynos, knows that Mustang Dyno's give real world numbers. Mustang dyno's offer load based (Eddy's) readings to simulate real-world conditions. Power is graphed how it is in real world conditions (street/track). Other dynos are not load bearing (free rolling dynos). Here is a link for more info on our specific dyno:http://www.mustangdyne.com/MDAWD500SE.htm Hope to see some of you guys soon. Last edited by JCAUTO; 07-31-2009 at 05:05 PM.

08-07-2009, 01:29 PM	#4
SpendOne Tri-State Post Whore Join Date: Feb 2005 Location: NE Philly Member #144 My Ride: 1987 Mazda RX7 LQ4 Turbo iTrader: (6)	No problem Bryan. let me know. __________________ 1993 GSX - 10.8@135 Stock motor & Trans - SOLD 1987 Mazda RX7 Single turbo LQ4 - 9.2@150 - SOLD 1980 Ford Fairmont 4Dr LQ4 Turbo AGAIN

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 days of work in prep for Dyno.... Dyno Sheet and Video.	Lil Shoaf	Gallery	26	04-26-2009 11:23 PM
New dyno pricing and tuning pricing efective today	RayArroyo	(Past Vendors)	30	09-23-2008 01:28 PM
RT Tuning Dyno Event - April 14+15, cheap dyno pulls! It's for a good cause!!!!	95TurboDC2	Upcoming Events	180	04-22-2007 01:39 PM
Dyno Pricing	Mac @ R/T Tuning	(Past Vendors)	8	05-21-2006 02:00 AM
dyno pricing LOL	Scapegoat	General Car Related Chat	6	05-18-2006 03:52 PM

08-20-2009, 09:04 AM	#6
JCAUTO Tri-State Training Wheels Join Date: Jul 2009 Member #14255 iTrader: (0)	hptuners dsmlink megasquirt sds aem neptune

08-20-2009, 09:09 AM	#7
empera Tri-State Post Whore Join Date: Feb 2007 Location: Philly. Member #3674 My Ride: 67.5 Roadster, 00 Outback, 93.5 Supra tt, 88 Shiro, Tundra, turbo sc300 iTrader: (5)	Price on full tune on AEM?

08-20-2009, 11:06 AM	#8
JCAUTO Tri-State Training Wheels Join Date: Jul 2009 Member #14255 iTrader: (0)	pm sent

08-20-2009, 11:30 AM	#10
JCAUTO Tri-State Training Wheels Join Date: Jul 2009 Member #14255 iTrader: (0)	We will be having a dyno-day soon just geting the shop together first. I will post when that is after we are setup. pm me an we can go over group rates.

08-24-2009, 02:20 PM	#11
full-cruise Tri-State Aficionado Join Date: Aug 2009 Location: L-town Member #14393 My Ride: 1.3 liter piston eater iTrader: (0)	microtech turbo rotary?

08-24-2009, 07:11 PM	#12
JCAUTO Tri-State Training Wheels Join Date: Jul 2009 Member #14255 iTrader: (0)	do you have the system already or do you need one. An if you have one is it lt8 or 10

08-29-2009, 10:59 AM	#13
full-cruise Tri-State Aficionado Join Date: Aug 2009 Location: L-town Member #14393 My Ride: 1.3 liter piston eater iTrader: (0)	im running the lt8s rite now that i would need tuned. iv played a bit with it to brake the motor in but i need it tuned for boost.