TriStateTuners.com :: Home of Tristate Auto Enthusiast - View Single Post

Vince@R/TTuning · 07-09-2008, 10:19 AM

Hey, we can certaintly break it in on the dyno, it cost $100 and we set air fuels so it isnt rich, and run it on the dyno for about 30min the we break it down take off the oil filter and cut it open to check for any material...then your good to go. so u will need and extra filter and oil if you wanna supply it, if not we have OEM filters and oil in stock. Also 400whp on a B16 with GSR cams and a 50 trim at 16lbs is pretty unlikely. also if you shooting for that kind of power your gonna run out of injector if you run 550cc's...let me know when you wanna set somthin up and we can go over pricing..thanx Vince

07-09-2008, 10:19 AM	#6
Vince@R/TTuning Vendor Join Date: Mar 2007 Location: telford Pa Member #3958 My Ride: the one in the back of the shop iTrader: (2)	Hey, we can certaintly break it in on the dyno, it cost $100 and we set air fuels so it isnt rich, and run it on the dyno for about 30min the we break it down take off the oil filter and cut it open to check for any material...then your good to go. so u will need and extra filter and oil if you wanna supply it, if not we have OEM filters and oil in stock. Also 400whp on a B16 with GSR cams and a 50 trim at 16lbs is pretty unlikely. also if you shooting for that kind of power your gonna run out of injector if you run 550cc's...let me know when you wanna set somthin up and we can go over pricing..thanx Vince __________________ Philadelphia Area's Only Authorized and Factory Trained Pro Tuners for:HONDATA:UPREV:APEXI POWER FC:AEM:COBB:ECUTEK To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.