TriStateTuners.com :: Home of Tristate Auto Enthusiast - View Single Post - SR20

Renegade_ · 05-17-2008, 03:24 PM

Alright, need some help troubleshooting this problem, I got a 240 with an S14 SR and I just drove it back 2 and half hours back from Maryland without a single hiccup. When I get home I get on a road and I do a quick pull 1-3 and when I shift into fourth all of a sudden all the electronics in the car cut out. There is no boost gauge but previous owner had it set on 12psi.

The hazards work, the clock works, I tried to jumpstart it but it won't start. Turn signals don't work, no turning over, no clicking from a relay. When I open the door though with the key in the ignition the alarm for open door goes off...

We looked at all the fuses and they are fine, all the connections are fine and basically re-grounded the entire engine (a bunch were loose). No engine problems at all and when we tried to do a pop start it sounded like it started going but it never actually started and just died again. It basically got no spark.

Any ideas on what to look for? I'm no SR guru so I thought I'd ask the masses.

05-17-2008, 03:24 PM	#1
Renegade_ Tri-State Post Whore Join Date: May 2006 Location: NNJ/NYC Member #1912 My Ride: 1J Swaggon iTrader: (2)	SR20 - Won't start after cutout, need help asap Alright, need some help troubleshooting this problem, I got a 240 with an S14 SR and I just drove it back 2 and half hours back from Maryland without a single hiccup. When I get home I get on a road and I do a quick pull 1-3 and when I shift into fourth all of a sudden all the electronics in the car cut out. There is no boost gauge but previous owner had it set on 12psi. The hazards work, the clock works, I tried to jumpstart it but it won't start. Turn signals don't work, no turning over, no clicking from a relay. When I open the door though with the key in the ignition the alarm for open door goes off... We looked at all the fuses and they are fine, all the connections are fine and basically re-grounded the entire engine (a bunch were loose). No engine problems at all and when we tried to do a pop start it sounded like it started going but it never actually started and just died again. It basically got no spark. Any ideas on what to look for? I'm no SR guru so I thought I'd ask the masses. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.