Quote:
Originally Posted by Gregory
You need a boost leak tester and an air compressor and you can find it yourself. You can make one for under $10. You want to hook it on the turbo inlet (or you can start back at the throttle body if you're not worried about the IC piping) and pump air in. Spray soapy water on any suspected hose or fitting and look for bubbles. If you loose the air quick, you probably have a leak, so keep looking untill you find out where it's going. Good luck.
|
Yeah, that was what I was going to try next. So I just take the intake filter off and put air through the inlet and then check the hoses? That's ok to do, right?
I have off tomorrow so I will try that.
This is such a pain in the ass, though. haha!
Thanks everyone else, bump for more possible solutions.