TriStateTuners.com :: Home of Tristate Auto Enthusiast - View Single Post

JNZTuning · 06-15-2007, 12:15 PM

This SALE will consist of PTE's 50 trim, 60 trim, and 60-1 turbos {NOT THE GT SERIES (they are on back order with PTE)} in both journal bearing and dual ball bearing center cartridges. These turbos will be offered with either a Mitsu or T3 exhaust housing (internal, external (o2), or external (manifold) wastegate provisions available).

Order online at http://www.jnztuning.com/catalog/ind...ath=239_24_162

PRICING TOO LOW TO PRINT!!! Call for details!!!

50 trim
SC 5031E (journal bearing)
SC 5031RE (dual ball bearing)

Max Rated HP: 450
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race or Dual Ball Bearing
A/R Ratio: .63
Garrett Compressor Wheel Trim: 50
Garrett Turbine Wheel Trim: 76

Garrett Compressor Wheel Specs:
Wheel Trim: 50
Wheel Diameter: 54mm
Wheel Inducer: 2.123"
Wheel Exducer: 3.000"

Garrett Turbine Wheel Specs:
Wheel Trim: 76
Wheel Style: T31 (stage 3)
Wheel Inducer: 2.559"
Wheel Exducer: 2.229"

60 Trim
SC 4431E (journal bearing)
SC 4431RE (dual ball bearing)

Max. Rated HP 565 Horsepower
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race or Dual Ball Bearing
A/R Ratio: .63
Garrett Compressor Wheel Trim: 60
Garrett Turbine Wheel Trim: 76

Garrett Compressor Wheel Specs:
Wheel Trim: 60
Wheel Diameter: 58mm
Wheel Inducer: 2.290"
Wheel Exducer: 2.950"

Garrett Turbine Wheel Specs:
Wheel Trim: 76
Wheel Style: T31 (stage 3)
Wheel Inducer: 2.559"
Wheel Exducer: 2.228"

60-1
SC 6031E (journal bearing)
SC 6031RE (dual ball bearing)

Max Rated HP: 580
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race or Dual Ball Bearing
A/R Ratio: .63
Garrett Compressor Wheel Trim: 60
Garrett Turbine Wheel Trim: 76

Garrett Compressor Wheel Specs:
Wheel Trim: 60
Wheel Diameter: 59mm
Wheel Inducer: 2.320"
Wheel Exducer: 3.000"

Garrett Turbine Wheel Specs:
Wheel Trim: 76
Wheel Style: T31 (stage 3)
Wheel Inducer: 2.559"
Wheel Exducer: 2.228"

Please specify model number and wastegate type (internal vs external) (and location of wastegate if external) when ordering. Please also specify if you want a cut or uncut exhaust housing if you are going with an internal wastegate. You can order online at http://www.jnztuning.com/catalog/ind...ath=239_24_162 or by calling the sales department at 215.997.6850.

06-15-2007, 12:15 PM	#1
JNZTuning Tri-State Addict Join Date: Feb 2007 Location: hatfield, pa Member #3587 My Ride: 2003 Z06,2006 Evo IX, 06 WRX, 1996 Eagle Talon TSI, 2000 MR2 Spyder iTrader: (0)	[GB] JNZ Tuning SALE on PTE Turbos!!! This SALE will consist of PTE's 50 trim, 60 trim, and 60-1 turbos {NOT THE GT SERIES (they are on back order with PTE)} in both journal bearing and dual ball bearing center cartridges. These turbos will be offered with either a Mitsu or T3 exhaust housing (internal, external (o2), or external (manifold) wastegate provisions available). Order online at http://www.jnztuning.com/catalog/ind...ath=239_24_162 PRICING TOO LOW TO PRINT!!! Call for details!!! 50 trim SC 5031E (journal bearing) SC 5031RE (dual ball bearing) Max Rated HP: 450 Inlet/Outlet Size: 3"/2" Bearing System: 360 Race or Dual Ball Bearing A/R Ratio: .63 Garrett Compressor Wheel Trim: 50 Garrett Turbine Wheel Trim: 76 Garrett Compressor Wheel Specs: Wheel Trim: 50 Wheel Diameter: 54mm Wheel Inducer: 2.123" Wheel Exducer: 3.000" Garrett Turbine Wheel Specs: Wheel Trim: 76 Wheel Style: T31 (stage 3) Wheel Inducer: 2.559" Wheel Exducer: 2.229" 60 Trim SC 4431E (journal bearing) SC 4431RE (dual ball bearing) Max. Rated HP 565 Horsepower Inlet/Outlet Size: 3"/2" Bearing System: 360 Race or Dual Ball Bearing A/R Ratio: .63 Garrett Compressor Wheel Trim: 60 Garrett Turbine Wheel Trim: 76 Garrett Compressor Wheel Specs: Wheel Trim: 60 Wheel Diameter: 58mm Wheel Inducer: 2.290" Wheel Exducer: 2.950" Garrett Turbine Wheel Specs: Wheel Trim: 76 Wheel Style: T31 (stage 3) Wheel Inducer: 2.559" Wheel Exducer: 2.228" 60-1 SC 6031E (journal bearing) SC 6031RE (dual ball bearing) Max Rated HP: 580 Inlet/Outlet Size: 3"/2" Bearing System: 360 Race or Dual Ball Bearing A/R Ratio: .63 Garrett Compressor Wheel Trim: 60 Garrett Turbine Wheel Trim: 76 Garrett Compressor Wheel Specs: Wheel Trim: 60 Wheel Diameter: 59mm Wheel Inducer: 2.320" Wheel Exducer: 3.000" Garrett Turbine Wheel Specs: Wheel Trim: 76 Wheel Style: T31 (stage 3) Wheel Inducer: 2.559" Wheel Exducer: 2.228" Please specify model number and wastegate type (internal vs external) (and location of wastegate if external) when ordering. Please also specify if you want a cut or uncut exhaust housing if you are going with an internal wastegate. You can order online at http://www.jnztuning.com/catalog/ind...ath=239_24_162 or by calling the sales department at 215.997.6850. Last edited by JNZTuning; 06-22-2007 at 06:40 PM.