Quote:
|
Some of the points in the above post are very good, but Dawn is wayyy too strong and will remove the wax as said but also it will etch the clear and remove needed solvents in the paint that keep it shining with normal care
|
I have had nothing but great results.Granted I dilute the dawn to a reasonable level. Dawn has a high alkalidity level but is not acidic. It's main purpose really is to strip the clear down to its bare chemical makeup, and start from a clean slate without keeping your old solvents (polish) on the surface. This makes for a surface thats easier for the next steps to bond to..
Excellent write-up and there are alot of good tips in there, glad you could share.