Quote:
Originally Posted by piku
Sup guys.. Off to work on the M. Hope to bring it back to life tonight after about 6-8 hours work. I have to:
* Rebuild driveshaft with new center bearing
* Drop diff
* Install driveshaft
* Install heat shield, center exhaust, o2 sensors, etc.
* Install lower control arms
* Torque up the rear on both side by jacking up the trailing arm
* Reinstall the ebrake cable
* Reinstall the ebrakes
* Install new rear brakes
* Install diff again
* Install driveshafts
* Install rear exhaust and muffler
drop car!
Invite is open if people are bored.
|
Good luck getting the nut loose on the driveshaft for the CB.