alright..well the motor is in...TVIS and intake manifold is on..i finially found the bolts that i needed for it at NAPA...Thank God.and while i was there i ordered a set of NGK6097's..they are a step colder then stock...then i went to pepboys and picked up 2 3"-2 1/2" couplers for the intercooler and a can of paint stripper...the wireng harness should be in this up comming weekend and i should be able to fire it up..i still need an axle carrier bracket for the passenger side axle...still dont know what im gonna do about that yet but i have a week to find one...i stripped my driver side fender today and that is going to get resprayed....when i got into the fender bender, the first time i sprayed it i didnt put hardner in the paint and it turned out like complete crap...so instead of putting it back on the car and having it look like **** im gonna respray it to match the car....other then that, nothing much has changed, i put the driver side axle in (Thicker axle then stock which is really nice, Carquest has some good stuff :thumbsup
....and i mocked up my intercooler and all my pipeing...i still have to figure out how im gonna mount the intercooler but i have this week to work on that...pictures are included as always...i THINK this is how i am going to route everything. i have a super small space between my heatsheild, my downpipe, and my fans(i dont know if its an st thing) but theres almost no room to fit my intercooler pipe....plus if i flip the "U" bend it wont be laying over top the downpipe and valve cover so it might stay a little cooler....i dont know...but the pictures are nothing finial, pipes still need to be cut, adjusted, mounted, so on and so forth..but heres the idea
The u bend is not right at all its just on there...but thats the way im thinking of putting it
