TriStateTuners.com :: Home of Tristate Auto Enthusiast - View Single Post

ImportDPS · 08-13-2008, 10:59 AM

Not sure if most of you know, but we have a 2WD Dynojet in house here at Import DPS. We get alot of calls for people asking for tuning sessions and just pulls so here is the special pricing for TST members only.

Dyno Rental Pricing
$90 First Hour
$65 Every Hour After that

Dyno Tuning Pricing
Hondata Kpro All Motor/Bolt On Setup $350
Hondata Kpro Turbo Mild Setup $450
Hondata Kpro Turbo Build Setup $600 +
S300 Tuning Turbo/All Motor $450
Chrome Tuning $100 - $250
Chrome Chips $25 with generic tuned map with your settings.
Neptune RTP Tuning $750 includes RTP Board.
Neptune RTP Tuning with Chip $450.
Sakura FC10 Tuning $650 +
Motec, AEM, Haltech - Call us for Pricing

Dyno Pulls with Air/Fuel Pricing
$65 3 Pulls with Air/Fuel Ratio.
$50 2 Pulls with Air/Fuel Ratio.

We also have VP Race Fuel in house. C16, E85, Methanol etc. Also can refill Nitrous as well for $6lb. We only fill per lb that we use, not like some places that will charge you for a full bottle that only took 8lbs.

Labor charges are not included. Labor Rate for all cars worked on while on the dyno is set at $75 an hour. This doesn't include parts, gas etc.

08-13-2008, 10:59 AM	#1
ImportDPS Tri-State Addict Join Date: Mar 2007 Location: Philadelphia Member #3900 My Ride: 2007 Civic Si, 2008 Acura RDX, 1998 Civic Hatch GSR-T, 1993 Civic Hatch K-Series coming iTrader: (0)	TST Dyno Pull Specials and Tuning Prices Not sure if most of you know, but we have a 2WD Dynojet in house here at Import DPS. We get alot of calls for people asking for tuning sessions and just pulls so here is the special pricing for TST members only. Dyno Rental Pricing $90 First Hour $65 Every Hour After that Dyno Tuning Pricing Hondata Kpro All Motor/Bolt On Setup $350 Hondata Kpro Turbo Mild Setup $450 Hondata Kpro Turbo Build Setup $600 + S300 Tuning Turbo/All Motor $450 Chrome Tuning $100 - $250 Chrome Chips $25 with generic tuned map with your settings. Neptune RTP Tuning $750 includes RTP Board. Neptune RTP Tuning with Chip $450. Sakura FC10 Tuning $650 + Motec, AEM, Haltech - Call us for Pricing Dyno Pulls with Air/Fuel Pricing $65 3 Pulls with Air/Fuel Ratio. $50 2 Pulls with Air/Fuel Ratio. We also have VP Race Fuel in house. C16, E85, Methanol etc. Also can refill Nitrous as well for $6lb. We only fill per lb that we use, not like some places that will charge you for a full bottle that only took 8lbs. Labor charges are not included. Labor Rate for all cars worked on while on the dyno is set at $75 an hour. This doesn't include parts, gas etc. Last edited by ImportDPS; 08-18-2008 at 03:07 PM.