|
The Great NY's - 2004 Mazda 6 - "Punisher 6 - Twin Turbo"
This is my ride. most know her as Punisher 6. i originally brought her for a DD while i built my other car. but when i totalled that other car (my escort) i started building this. and this is where we are at since i crashed my other car in 2008. i brought the 6 sometime in 2006.
2004 Mazda 6s (was a base model) 3.0L Duratec V6 Had the nasty tan/brown interior when i brought it. Currently 105k on the ticker. Dreading hitting 100k, lol MODIFICATIONS: Engine/Drivetrain: -Custom Twin Turbo Setup -2 Turbonetics T3 Super 60s A/R .36 Hybrid (ported compressor sides w/ 60-1 Hi-Fi Compressor wheels) -Custom 3" Turbo Inlets -Custom mounted Spearco Intercooler -Raptor BOV - vta -Custom SS 321 Piping -Custom 3" Stainless Steel Exhaust -Injector Dynamic ID1000 Fuel injectors -Fully Built Engine (Noble Hybrid) Blueprinted Stock Forged Crank Forged Wiesco Pistons (8:5.1 compression) w/ valve reliefs Forged Scat H-Beam Rods Clevite 77 Rod and Main Bearings Machined Oil Squirters Upgraded Oil Pump Mild head Port ST220 Valve Springs -Megan Racing M-GT Carbon Fiber Turbo Mufflers -Vibrant Perfomance 3" Metal Cat & 3" Resonator -NGK Iridium IX (TR6 - colder) gapped @ .30 -AEM Water Meth Injection System -AEM Methanol Injection Monitoring System -PowerMod Advanced Engine Management System -Mustang Cobra 4v Ignition Coils -TGNY Custom Ignition Coil Leads -EMI Suppressors added Throughout the electrical system -Throttle Body Coolant Bypass with T-fitting delete -Fidanza 9 lbs. Lightweight Aluminum Flywheel -Competition Clutch Stage 5 (4-puck sprung) -Twisted Visionz/TGNY TCS Auto Off module -MFactory Prototype Forged Helical LSD -ARP Ring Gear to Differential Mounting Hardware -Modified/Optimized EGR system modification -AWR Lower Rear Bone Mount -AWR Upper Transmission Mount -AWR Passenger Side Head Mount -N2MB WOT Box with 2-step and No-lift Shift Feature -TWM Short Throw Shifter -TWM Solid Shift Plate Bushings -TWM Shift Cable Bracket -Optimized 3.7L Throttle Body (75mm) w/ custom TB spacer "first to run the 3.7L TB" -Lightweight Aluminum Alternator Pulley -Fluidampr 10% Under-driven Crank Pulley -Modified Oil Catch Can (VTA, Baffled, Filtering Medium added) -NRG Engine Grounding Kit -NRG Chrome Hood Dampers(modified by me) -Rear hood weather stripping removal(for heat expelling) -Custom Polished Aluminum Cooling Piping -180 Degree Stant Premium Thermostat -Nitrous Express Intercooler Spraybar -Nitrous Express Proton Nitrous Injection System w/ Fly-By-Wire Controller -Ported Lower intake Manifold Runners -Ported Upper Intake Manifold (first to do it) -O2simulator -Battery Relocation to Trunk -ETC Electronic Throttle Controller Brakes and Suspension: -BC Racing Coilovers BR Type -R1 Concepts slotted and drilled rotors (front and rear) -Axxis High Performance Ceramic Brake Pads -Racing Beat Front Sway Bar -Racing Beat Rear Sway Bar -AWR Adjustable Sway bar Endlinks Front -AWR Adjustable Sway Bar Endlinks Rear -GT Spec 6-point Ladder Brace -Custom Frame Connectors -GT Spec Rear Trailing Arms -Autoexe rear trunk brace -Motul RBF 600 Racing Brake Fluid (Dry Boiling Point 593 degrees F) -Front Upper Strut Brace -Candy Blue Powder Coated Strut Bar Mounting Plates -Techni-Fit Blue Stainless Steel Brake Line Kit -Techni-Fit Blue Stainless Steel Clutch Line Exterior: -Autoexe GG-02 Front Bumper, 2-toned w/ black accenting(not sold in the states) -Cyber Full Rear Bumper (2-toned w/ black accenting) -Cyber Side Skirts -Car-LED Black Housing LED conversion tail lights -The Retrofit Source: Clear Lense Bi-Xenon Projector Upgrade w/ Morimoto Mini H1 5000k bulbs -Wire Tuck (first V6 tuck) -Four way Brake-light Mod -06+ Mazda 6 Black Housing Headlights -Candy Blue Powder Coated Valve Covers -Candy Blue Powder Coated Charge Piping -Black headlight eyelids -Custom Flying M Emblems -Debadged -custom under hood mirror inserts by www.underthehoodinc.com[/URL] -Door Guard deletion -Custom Stainless Polished Engine Cover -Custom Stainless Fuse Box Insert -Blue LED headlight marker lights -Chrysler Pacifica Stereo Antenna -Aftermarket Sunroof w/ wind deflector -Hyperwhite Headlight turn signals -Fenders Rolled -Custom Powdercoated and Airbrushed RX-8 wheels -Nitto NT-05 235 40 18 Tires -Powdercoated White Lugnuts - Inverted Style Interior: -Full Custom Interior Done by Gillin Custom Design - www.gillincustomdesign.com[B[/URL]] (too much to list)[/B] -Custom Steering Wheel Airbag -Blue LED dome lights -Sony CDX-M9900 cd/dvd/mp3 player head unit -Sony CDX-757mx ten disk cd changer -Kicker Solobaric L7 Subwoofer in custom ported box -Kicker KX600.1 mono class D amplifier -Blue LED door sill lights -Alfa Otto Racing Reverse Glow White Gauge faces -Stainless Steel Weighted Shift Knob (2 lbs) (Member Front1ine) -Lotek Tri-gauge dash pod -Glowshift Triple Gauge A-Pillar Pod -AEM Injection Monitoring Gauge -Prosport Performance Wideband A/F Monitor Setup (Evo Series) -Prosport Performance Boost/Vac Gauge (Evo Series) -Prosport Performance Oil Temp Gauge (Evo Series) -Prosport Performance Oil Press Gauge (Evo Series) -Prosport Performance Coolant Temp Gauge (Evo Series) -Prosport Performance Fuel Press Gauge (Evo Series) -Greddy Full Auto Black Turbo Timer -Greddy Profec B Spec-2 Electronic Boost Controller Future Mods : -Custom Sheet metal Intake manifold -Cryo Treated Transmission -Custom Driveaxles -Custom Traction Bars i think that is everything, but i tend to forget some stuff. http://farm9.staticflickr.com/8319/8...df206a59_b.jpg punisher studio shoot (1 of 1)9.20.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8310/8...92e2d332_b.jpg punisher studio shoot hood shot edit (1 of 1)9.20.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8038/7...936d27b2_b.jpg bear mountain (21 of 21)9.13.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8179/7...2d7396ea_b.jpg bear mountain (19 of 21)9.13.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8452/7...6eae15fa_b.jpg bear mountain (1 of 21)9.13.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8435/7...d0d0f433_b.jpg bear mountain (20 of 21)9.13.2012 by Twisted Visionz Photography, on Flickr http://farm8.staticflickr.com/7251/7...a659b7ab_b.jpg untouchables 2012 (47 of 49)8.26.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8297/7...397f1685_b.jpg nitrous purge 6 (1 of 1)-38.23.2012 by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8432/7...f1148765_b.jpg punisher6 night (1 of 1) by Twisted Visionz Photography, on Flickr http://farm8.staticflickr.com/7256/7...1258d757_b.jpg punisher6 night (5 of 5) by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8005/7...d862bbff_b.jpg DSC_05778.3.2012 by Twisted Visionz Photography, on Flickr http://farm8.staticflickr.com/7112/7...ce14a882_b.jpg summernationals 2012 (15 of 68) by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8019/7...1c28f5b5_b.jpg summernationals 2012 (13 of 68) by Twisted Visionz Photography, on Flickr http://farm8.staticflickr.com/7137/7...c4d6096d_b.jpg summernationals 2012 (16 of 68) by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8010/7...df6271b0_b.jpg nitrous trunk (3 of 3) by Twisted Visionz Photography, on Flickr http://farm9.staticflickr.com/8153/7...8b91d952_b.jpg punisher6 dyson racecar (1 of 1) by Twisted Visionz Photography, on Flickr |
currently im working on building a motor on the side to swap in. built and worked everything so i can go for my goal....22psi+ and 600+hp...........and more on nitrous (700's)
i still have no numbers on the meth kit, since i havent used it yet, so more power can be made on the stock block once i spray meth. so look for more from this 6 when the motor is built. |
car looks great, RX8 rims nice choice haha...
Im loving everything except the painted interior to me thats always looked cheap and ricey.... Real nice car bro |
thanks man, greatly appreciated.
the interior i chose to paint because i drive this car a lot. and using the type of paint i did. it doesnt chip or scratch, lol. i looked for longevity. the painted parts of the interior is actually a 3stage paint job like some would use on a car exterior in body shop. UBER durable, lol. i do know the interior isnt everyone taste, but i absolutely love it EDIT: i also do a lot of shows all over the place so the interior does really well at the shows. |
As long as you love it...
Everything is pretty wild i would love to see some videos of this beast |
NOICE!!!! Different is always good
|
you fit two T3 super 60s in there?
|
looks sick on the outside. I think the interior is kinda gawdy.
It may be the super shine on the black lol...try a different dash cleaner. otherwise nice car |
I really like to looks and detail, though the interior isnt my taste. The colors dont bother me, its just to shiny. but over all, thumbs up!
|
wow car looks nastyyyyy
|
jaw-dropping car! me liike. rims look great.
|
Quote:
Quote:
yessir Quote:
yea the interior isnt for everyone. but i dont use dash cleaner. this sections of the interior that was painted was done with a 3 stage, so its a deep gloss black base, with another high gloss black mid-coat and a nice clear coat on top odf that. the interior cant be scratched or chipped. nor does it need and cleaner..quick detailer and a quick wipe and done Quote:
thanks bro Quote:
thanks a lot Quote:
thanks greatly appreciated |
got any photos of the twins setup? cant see anything in your photos
|
Pictures definitely don't do this car justice. You HAVE to see it in person. It's awesome
|
Quote:
pics up in a moment Quote:
thanks storm, sorry i didnt make it to the meet last night i got cuaght up crazy yesterday. a few pics from when i was doing up eveything: (sorry for the bad quality, these were taken with my camera phone, at the time i had misplaced my regular camera) REAR MANIFOLD AND TURBO: http://i100.photobucket.com/albums/m...5/IMAG0020.jpg http://i100.photobucket.com/albums/m...5/IMAG0020.jpg http://i100.photobucket.com/albums/m...5/IMAG0022.jpg http://i100.photobucket.com/albums/m...5/IMAG0022.jpg http://i100.photobucket.com/albums/m...5/IMAG0024.jpg http://i100.photobucket.com/albums/m...5/IMAG0025.jpg front manifold and turbo: http://i100.photobucket.com/albums/m...5/IMAG0027.jpg http://i100.photobucket.com/albums/m...5/IMAG0028.jpg http://i100.photobucket.com/albums/m...5/IMAG0026.jpg and one more of the rear setup http://i100.photobucket.com/albums/m...IMAG0025-1.jpg |
holy ****.....holy ****.....holy ****....yea that about says it. Car is awesome man, keep up the good work. I remember seeing this somewhere else, cardomain maybe?
|
I feel like the front bumper needs to be broken up a bit more, like the foglight section painted black or something, I can't put my finger on it, but the car looks great, at first I was a little iffy on the interior, but as a show car its something they look for, and it looks great in that aspect, very nice!
|
wow, impressive build. gotta say the interior isnt my thing, but quality work otherwise.
|
Quote:
Quote:
i photoshopped a bunch of different things on the front bumper. one of them being the foglight area being black. anything other than how it is now just looked way to busy my car is an all around car, not just show. its daily driven when i want to, lol. i dont much believe in "SHOW" cars. im more of an "ALL ASPECT" kinda builder. whereas i drive it, its hella reliable, comfortable, can dogreat at shows, and just street cruising and then if need be, hold it down at the track. (which i have yet to do with it, lol) Quote:
i think i have a good balance of class and flash |
| All times are GMT -4. The time now is 09:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.