TriStateTuners.com :: Home of Tristate Auto Enthusiast

TriStateTuners.com :: Home of Tristate Auto Enthusiast (http://www.tristatetuners.com/forum/index.php)
-   (Past Vendors) (http://www.tristatetuners.com/forum/forumdisplay.php?f=56)
-   -   Oakes - Detailed: 2009 Nissan 370z - White Pearl (http://www.tristatetuners.com/forum/showthread.php?t=95482)

Oakes 03-09-2010 01:50 PM

Oakes - Detailed: 2009 Nissan 370z - White Pearl
 
This past weekend a 2009 Nissan 370Z in White Pearl snuck into the garage, I have to start locking the doors around here! The car arrived "driven" which is my way of saying dirty, in a good sense, so the prep started right away. After the prep, the body did show a good bit of swirls and micro marring, nothing tragic though, and the paint had consistent readings from the mid-high 80s to the 120s. Not the thickest, but not horrible either. The pictures will speak for themselves on the process of the detail and what was covered, Mikhael and I rather enjoyed this car as it was enjoyable to work on and we got a lot of gloss out of the pearl paint.

Process:

Menzerna 203 - Orange
Menzerna 106ff - Green
P21S Paint Cleanser
Jetseal 109

Exhaust:
P21S Polishing soap
P21S Finish Restorer

Wheels:
P21S Gel Wheel Cleaner
Swissvax brushes
Rejex Sealant

Trim:
Poorboy's Natural Look - Exterior and interior trim

Chicken Parmesean Sandwhiches and Fruit punch - Energy


Quick overall shot of the car, and some other pics of it as it arrived.

http://i600.photobucket.com/albums/t...370/370046.jpg
http://i600.photobucket.com/albums/t...370/370049.jpg
http://i600.photobucket.com/albums/t...370/370051.jpg
http://i600.photobucket.com/albums/t...370/370053.jpg
http://i600.photobucket.com/albums/t...370/370063.jpg

The wheels before and after:

http://i600.photobucket.com/albums/t...370/370047.jpg
http://i600.photobucket.com/albums/t...370/370048.jpg
http://i600.photobucket.com/albums/t...70/3702042.jpg
http://i600.photobucket.com/albums/t...70/3702045.jpg

Exhaust tips before and after:

http://i600.photobucket.com/albums/t...370/370057.jpg
http://i600.photobucket.com/albums/t...370/370058.jpg
http://i600.photobucket.com/albums/t...70/3702054.jpg
http://i600.photobucket.com/albums/t...70/3702056.jpg

Pictures of the paint after wash/clay, not terrible, but defects are present

The clay bar itself and then the defects:
http://i600.photobucket.com/albums/t...70/3702001.jpg

http://i600.photobucket.com/albums/t...370/370121.jpg
http://i600.photobucket.com/albums/t...370/370127.jpg
http://i600.photobucket.com/albums/t...370/370131.jpg
http://i600.photobucket.com/albums/t...370/370133.jpg
http://i600.photobucket.com/albums/t...370/370135.jpg

Progress pics of the correction, this first pair shows the difference between the corrected fender and the uncorrected door

http://i600.photobucket.com/albums/t...370/370142.jpg
http://i600.photobucket.com/albums/t...370/370145.jpg

The rear hatch pillar:

http://i600.photobucket.com/albums/t...70/3702003.jpg
http://i600.photobucket.com/albums/t...70/3702004.jpg

The B-Pillar

http://i600.photobucket.com/albums/t...70/3702008.jpg
http://i600.photobucket.com/albums/t...70/3702010.jpg

Rear Quarter panel

http://i600.photobucket.com/albums/t...70/3702015.jpg
http://i600.photobucket.com/albums/t...70/3702019.jpg

A 50/50 shot of the trunk lid:

http://i600.photobucket.com/albums/t...70/3702025.jpg
http://i600.photobucket.com/albums/t...70/3702026.jpg

Rear Tailight correction:

http://i600.photobucket.com/albums/t...70/3702030.jpg
http://i600.photobucket.com/albums/t...70/3702031.jpg

Now for the final results, start with reflection photos:

http://i600.photobucket.com/albums/t...70/3702121.jpg
http://i600.photobucket.com/albums/t...70/3702068.jpg
http://i600.photobucket.com/albums/t...70/3702071.jpg
http://i600.photobucket.com/albums/t...70/3702067.jpg
http://i600.photobucket.com/albums/t...70/3702076.jpg
http://i600.photobucket.com/albums/t...70/3702080.jpg
http://i600.photobucket.com/albums/t...70/3702084.jpg
http://i600.photobucket.com/albums/t...70/3702087.jpg
http://i600.photobucket.com/albums/t...70/3702091.jpg
http://i600.photobucket.com/albums/t...70/3702110.jpg
http://i600.photobucket.com/albums/t...70/3702144.jpg
http://i600.photobucket.com/albums/t...70/3702132.jpg

Overall Profile pics of the car completed:

http://i600.photobucket.com/albums/t...70/3702093.jpg
http://i600.photobucket.com/albums/t...70/3702096.jpg
http://i600.photobucket.com/albums/t...70/3702097.jpg
http://i600.photobucket.com/albums/t...70/3702099.jpg
http://i600.photobucket.com/albums/t...70/3702100.jpg
http://i600.photobucket.com/albums/t...70/3702102.jpg
http://i600.photobucket.com/albums/t...70/3702103.jpg
http://i600.photobucket.com/albums/t...70/3702104.jpg
http://i600.photobucket.com/albums/t...70/3702106.jpg
http://i600.photobucket.com/albums/t...70/3702119.jpg
http://i600.photobucket.com/albums/t...70/3702120.jpg
http://i600.photobucket.com/albums/t...70/3702123.jpg
http://i600.photobucket.com/albums/t...70/3702147.jpg

Thank you for looking! Comments appreciated!

-Oakes

lownslow95 03-09-2010 02:02 PM

Wow, amazing job.

piku 03-09-2010 02:08 PM

Very nice

bmatyeah 03-09-2010 03:14 PM

looks sick, what is the process on the wheels?

Oakes 03-09-2010 04:44 PM

Thanks guys!

The wheel process is pretty much as follows

P21S Wheel Gel, or Diablo Wheel Gel - spray on - let soak for a minute or two.
Rinse off - If it needs to be broken down more, spray again and then rinse after a little more time.
Using Swissvax brushes and the EZ-Detail wands for the barrels agitate the wheels
Get the calipers, lug holes, spoke corners, everything. Have about 8 or 9 different tools for the wheels alone.
Rinse down, then dry with microfiber.
Chrome and finished wheels get polished, the wheels on this Z were in great shape so we jumped to a sealant and let dry for a few hours.
After that you can apply more sealant or pretty much done at the point.

Mrjaydeeone 03-09-2010 08:56 PM

amazing work

Oakes 03-10-2010 11:07 AM

Thank you sir!

trista 03-10-2010 11:21 AM

I just wanna put my fingerprints alll over it now!
good job C:

CYANiDE 03-10-2010 11:24 AM

The guy that helps you with these (more so is learning with you) drives an Accord coupe right? He's on the forums and he posted this up that he helped someone with it and I'm 99% sure it was this same Z. Think his name is Misha?

BTW - clean detail! I sent you a message on your site for a quote, any chance when you gunna get back to me?

Oakes 03-10-2010 11:25 AM

Yes, Mischa is his username, he works with me on a lot of cars and does an awesome job. I am currently going through my emails, for some reason when I receive emails from the site, I don't get notified on my phone as I do with every other email. So with that said, I'm delayed getting back to them, but it is becoming routine now. Sorry for the delay!

Scapegoat 03-10-2010 11:26 AM

awesome. and i thought my car was dirty

Scapegoat 03-10-2010 11:27 AM

Quote:

Originally Posted by Oakes (Post 1671114)
Yes, Mischa is his username, he works with me on a lot of cars and does an awesome job. I am currently going through my emails, for some reason when I receive emails from the site, I don't get notified on my phone as I do with every other email. So with that said, I'm delayed getting back to them, but it is becoming routine now. Sorry for the delay!

interesting... its using the same email address as before right?

Oakes 03-10-2010 11:30 AM

Quote:

Originally Posted by Scapegoat (Post 1671116)
interesting... its using the same email address as before right?

It is, it's just Gmail doesn't send a notification to my phone for just the site emails, I receive them...just later on when I check it on the comp. May be a phone issue?

I want to get it set up that the emails and such are based off the domain name as opposed to being @gmail.com

Scapegoat 03-10-2010 11:34 AM

Quote:

Originally Posted by Oakes (Post 1671119)
It is, it's just Gmail doesn't send a notification to my phone for just the site emails, I receive them...just later on when I check it on the comp. May be a phone issue?

I want to get it set up that the emails and such are based off the domain name as opposed to being @gmail.com

can probably do that easily through godaddy. hopefully the domain being registered elsewhere won't be an issue. i'll look into that this weekend as well when i look into transferring the hosting

Oakes 03-10-2010 11:49 AM

Sounds good to me. I just received all my old data last night, so I'll have all the albums ready to go when the gallery is ready to get set up.

vpn2001 03-10-2010 04:35 PM

Nick did a fantastic job on my Z. I highly recommend him. Thanks again.

Oakes 03-10-2010 05:18 PM

Quote:

Originally Posted by vpn2001 (Post 1671512)
Nick did a fantastic job on my Z. I highly recommend him. Thanks again.

Thanks Vu! I enjoyed working on your car very much!

Neo 03-11-2010 10:00 PM

Vu? Ken's cousin Vu?

Oaks, verify his intake, Injen?

If so contact me Vu :)

DPancoast 03-12-2010 02:10 AM

wowzer.. that car was very dirty! lol... looks great as always

Oakes 03-12-2010 12:43 PM

The car did infact have an Injen intake.

Thanks Dpan!


All times are GMT -4. The time now is 07:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.