TST Dyno Pull Specials and Tuning Prices
 

http://importdpsonline.com/Client/cd...3748d/logo.png

Not sure if most of you know, but we have a 2WD Dynojet in house here at Import DPS. We get alot of calls for people asking for tuning sessions and just pulls so here is the special pricing for TST members only.

Dyno Rental Pricing
$90 First Hour
$65 Every Hour After that

Dyno Tuning Pricing
Hondata Kpro All Motor/Bolt On Setup $350
Hondata Kpro Turbo Mild Setup $450
Hondata Kpro Turbo Build Setup $600 +
S300 Tuning Turbo/All Motor $450
Chrome Tuning $100 - $250
Chrome Chips $25 with generic tuned map with your settings.
Neptune RTP Tuning $750 includes RTP Board.
Neptune RTP Tuning with Chip $450.
Sakura FC10 Tuning $650 +
Motec, AEM, Haltech - Call us for Pricing

Dyno Pulls with Air/Fuel Pricing
$65 3 Pulls with Air/Fuel Ratio.
$50 2 Pulls with Air/Fuel Ratio.

We also have VP Race Fuel in house. C16, E85, Methanol etc. Also can refill Nitrous as well for $6lb. We only fill per lb that we use, not like some places that will charge you for a full bottle that only took 8lbs.

Labor charges are not included. Labor Rate for all cars worked on while on the dyno is set at $75 an hour. This doesn't include parts, gas etc.

Prices listed are "special" TST prices? Do you let owner drive on the dyno?

Only if they have done it before. One slight mixup with the break while clutch is engaged and you can start breaking stuff.

Make sure you guys come down!

Thats not a bad price considering some places charge you around 150-175 for rental, but those usually are tuning time involved. So we just make an appointment for it? Will the hour include a/f readings? Also, i have nitrous and want to change out jets during the hour time, will you guys have to do it, or will you allow me to do it? Thanks!

You can do it, but remember you are on the clock. Includes air fuel readings.

Monday Bump!!

Thursday Bump!!