TriStateTuners.com :: Home of Tristate Auto Enthusiast

TriStateTuners.com :: Home of Tristate Auto Enthusiast (http://www.tristatetuners.com/forum/index.php)
-   Mitsubishi Talk (http://www.tristatetuners.com/forum/forumdisplay.php?f=60)
-   -   2g mas adjuster screw (http://www.tristatetuners.com/forum/showthread.php?t=32418)

turbo4g63 04-18-2007 01:13 PM

2g mas adjuster screw
 
i was browsing the RRE website and came accross the mas adjustment...i was thinking about backing out the screw a little bit and see what kind of changes it makes to the car.

have any of you guys done this mod...on their settings section for the AFC they have the screw backed out to flush ...i wasn't gonna do that b/c i heard it makes the car idle a bit rough, but any tips or insight would be appreciated. Thanks

turbo4g63 04-18-2007 02:51 PM

here is the link http://www.roadraceengineering.com/e...adjustment.htm

PaleDSM 04-18-2007 08:19 PM

I wouldn't screw with a 2G MAS at all. There is no flow restriction until over 400 whp so why risk the driveability issues.

SpendOne 04-18-2007 10:29 PM

It just takes in more unmetered air. As PaleDSM said, if you dont need to hack, why bother.

turbo4g63 04-18-2007 10:46 PM

Quote:

Originally Posted by PaleDSM (Post 519443)
I wouldn't screw with a 2G MAS at all. There is no flow restriction until over 400 whp so why risk the driveability issues.

in that case, i'm not touching it


All times are GMT -4. The time now is 02:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.