Oil Feed Fitting for a 14b
 

I don't know why I am having so much trouble finding a fitting for my 14b Oil Feed Line. I have a 3an 40" SS line I am using for the feed (yes I am using 3an instead of 4an as a restrictor because pressure comming from my oil feed location is high)... Anyways, I posted on DSMtuners and PhiladelphiaDSM without any luck.... why can't I find a freaking fitting that will screw directly into the port of my 14b... the threads are 12mx1.25... I can't find any 12x1.25 to 3an or even 4an fittings.... what gives? I know RRE, Buscher, SBR etc all use this type of fitting...

check the hardware store, you never know, you might get lucky and find what you need there, it seems that you covered all the other options

I think the problem is the small size of the line. Most run a restrictor inline in a -4AN line. I just looked and I don't even see any listings for a -3AN AN to metric fitting.

Perhaps try a Hydraulic fitting shop like Kenco (215)368-3779

http://i93.photobucket.com/albums/l7...z/DSCN1147.jpg


$28 dollars later I have a solution....owch