TriStateTuners.com :: Home of Tristate Auto Enthusiast

TriStateTuners.com :: Home of Tristate Auto Enthusiast (http://www.tristatetuners.com/forum/index.php)
-   General Car Related Chat (http://www.tristatetuners.com/forum/forumdisplay.php?f=29)
-   -   Rebuild OR New Engine??? (http://www.tristatetuners.com/forum/showthread.php?t=23942)

SUB2.5RS 11-27-2006 02:34 AM

Rebuild OR New Engine???
 
Don't be alarmed! My RS is still running. This question is for my Supra. Its been sitting for a bit now and now that I finially have a garage I can actually do something with it. My question is should I send the engine away to be rebuilt or should I just get a new replacement engine for it?? I found one for $900 and some change (shipping) and if a rebuild is going to cost more I rather buy a new one. Now when I say rebuild I would want a price on just all factory. And maybe a price on some performance parts (rods,pistons etc.) So what does everyone think I'm shooting for about 400hp. And can anyone give me a place that can do what I'am asking? Nothing in gods country something local I dont mind a drive but it better be worth it. Please everyone let me know what you all think because I need to set myself in some kind of direction. Thanks!

teh DIRT 11-27-2006 02:43 AM

okay change your thread title....because i got alarmed.

rebuild, its more fun

Ender81 11-27-2006 02:45 AM

PM Supraholic, he knows more about Supra's then anyone I know (I think he's rebuilt three of them now). I think he's got a thread going in the gallery section about his turbo'd Cressida.

UGotSchooledByaGirl 11-27-2006 02:46 AM

Quote:

Originally Posted by teh DIRT (Post 374997)
okay change your thread title....because i got alarmed.

rebuild, its more fun

+1 So much more fun..

SUB2.5RS 11-27-2006 02:52 AM

Quote:

Originally Posted by teh DIRT (Post 374997)
okay change your thread title....because i got alarmed.

rebuild, its more fun

haha no I'm going to keep to like that to get peoples input. J/K O and thanks for the info, people keep it coming while I do the PM'ing.

SUB2.5RS 11-27-2006 01:38 PM

Bump! Please!

ej20wrx123 11-27-2006 01:50 PM

if you can get a new "engine" for 900 run to that place and buy it. I bet its just a empty short block. If you do a rebuild you will most likly drop thousands of dollors unless you go all stock or use used parts. With a supra motor you have to remember that you have to get 6 of everything instead of 4 which adds lots of money.

SUB2.5RS 11-28-2006 12:18 AM

bumo the el threado! bump baby bump! come down to the bump to the bump bump bump!

RayArroyo 11-28-2006 12:27 AM

i already talked to you about it

SUB2.5RS 11-28-2006 03:52 AM

Quote:

Originally Posted by ray@turbotek (Post 376086)
i already talked to you about it

I know...I think I forgot what you said. hahahaha

flashgordon 11-28-2006 05:46 PM

Rebuild what you have. A rebuild would be a better choice if you plan on making any amount of power and want the thing to live. The stock head gaskets suck, but you can solve that problem while the motor is apart. It's always nice knowing what is inside your engine for piece of mind when you start adding mods. A rebuild with some good parts would be cheaper than a new motor that will not handle the hp you plan on making.

Supraholic 12-01-2006 11:56 PM

I truly don't think $900 will get you a "NEW" engine. A rebuilt motor, even at Auto Zone is about $3000. This is for a bare long block probably. $900 would get you a nice USED motor. If you are looking into upgrading it for more power, I suggest a rebuild. If you rebuild your engine "the right way" on stock fuel, it should make about 275-300hp. With fuel upgrades, stock block should handle 400hp easily. Make sure whoever rebuilds your 7M knows what they are doing. If you're rebuilding, most likely you have knocking rods??? If whoever rebuilds your motor does not know about 7Ms, you'll have rod knock again within a couple thousand miles guaranteed, depending on your driving style, even if everything is back to normal specs. If it is rebuilt properly, you should never have to open the block again under proper tuning. Let me know if you need any info and good luck with the rebuild or motor swap.

Raven18940 12-02-2006 01:26 AM

I thought the standard bottom end on those was good for 500 hp? What causes rod knock on a 7M out of curiosity? I want to get a 3rd gen supra some day and I'm trying to absorb as much knowledge as I can.

SUB2.5RS 12-02-2006 02:43 AM

Quote:

Originally Posted by Raven18940 (Post 380448)
I thought the standard bottom end on those was good for 500 hp? What causes rod knock on a 7M out of curiosity? I want to get a 3rd gen supra some day and I'm trying to absorb as much knowledge as I can.

Well I had a bad head gasket. Thats why.

flashgordon 12-02-2006 07:45 AM

Quote:

Originally Posted by SUB2.5RS (Post 380511)
Well I had a bad head gasket. Thats why.

This is why it's better to rebuild. A new engine will have the same pos head gasket but you can O-ring the engine during a rebuild and never have to worry about head gasket problems. Even if all you did was head studs and a metal head gasket, you would be way ahead of the stock setup.

Raven18940 12-02-2006 10:35 AM

Quote:

Originally Posted by SUB2.5RS (Post 380511)
Well I had a bad head gasket. Thats why.

Oh, well that's every 7M on the market. :p Have you got a 7M-GTE? If you want 400 hp I'd rebuild the stock bottom end and throw a metal head gasket on that bitch and it'll be indestructible.


All times are GMT -4. The time now is 08:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.