I need a 30 MM deep socket!
 

Anyone know where I can get one or even just borrow one for like 20 minutes. I checked Pepboys autozone and sears. I cannot find one!

Did you try sears hardware??? I bought my whole set of deep sockets from there.

go talk to a local shop near you and ask if you can borrow it and u'll give the guy a few bills, also give him something of urs to hold onto so he knows he'll get his socket back b/c a snap-on socket that big costs like $50

pep boys or any car parts, sears,etc sells them . the trick is, you have to look in the section that has the black ones that are ment for impact guns.

+1

9 times out of 10, they won't have chrome sockets that big. You ain't taken an axle nut off without a 10' breaker bar, or an impact gun.

Common guys, at least read my first post. I have checked sears (hardware) pep boys, and autozone. I also have checked the impact section

I bought a 30mm socket at AutoZone a few weeks ago. Its not with all the other sockets. I found it near all the specialty tools: oxygen senor sockets, crows foot, etc. And I know Sears Hardware also carrys one but i think they only have a standard socket.

Just might have one! what size is that in SAE

sae wont fit. The clearence is so tight an impact wont fit because the sidewall of an impact is too thick. The sae equal is 1 3/16, which I have already tried. I ordered the right one through snap on for $40 and $15 for 2 day shipping

Good deal and good luck! At the shop we have up to 2 inch i believe and no metric deepsockets, By the way what are you working on.

trans output shaft on a m3