![]() |
Half rad + turbo + A/C = overheating issues?
I've done some research not a lot though and I'm deciding to go with a half rad on my turbo teg. I want to be able to keep my A/C and not have any overheating issues. Now I know the fans can be mounted up two was as either a push or a pull. I was just wondering will i get some overheating issues if i use two fans as a push and one as a pull, while trying to retain my A/C? Or maybe two will work just as fine?
|
Fan configuration usually does not matter, it's usually a space issue that necessitates push/pull. As long as you go with a decent aftermarket rad (Koyo, Fluidyne) you should be fine.
|
As long as you have a strong fan and a proper shroud to direct the air you should be fine
|
It is my experience that keeping AC on turbo Honda's is a waste of time. While the clutch for the compressor can disengage, the extra torque and the high revolutions bouncing off the rev limiter almost always destroy compressors rather quickly.
|
Quote:
|
| All times are GMT -4. The time now is 07:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.