TriStateTuners.com :: Home of Tristate Auto Enthusiast

TriStateTuners.com :: Home of Tristate Auto Enthusiast (http://www.tristatetuners.com/forum/index.php)
-   (Past Vendors) (http://www.tristatetuners.com/forum/forumdisplay.php?f=56)
-   -   Anything Greddy, Apexi, Forge, Tein, Volk, Hallman, Walbro, Tial, & Buddy Club Sale! (http://www.tristatetuners.com/forum/showthread.php?t=6262)

KGParts 10-14-2005 07:37 AM

Anything Greddy, Apexi, Forge, Tein, Volk, Hallman, Walbro, Tial, & Buddy Club Sale!
 
Ok Guys, what does everyone need?
Post it here and I will PM you your TST price! If you need something other than a company listed, feel free to ask anyway. (I couldn't list EVERYTHING!)

*All prices PM'ed will be for pick-up at the shop. If you need something shipped, please let me know the zip it will need to go to if you are not able to pick up.

Who's first? :)

KGParts 10-14-2005 07:41 AM

Woops, can a Mod move this thread. Sorry, its early... :cyberguy:

wonner 10-14-2005 08:10 AM

I need a Apexi Power Intake(air filter only) for a 88 RX-7.

KGParts 10-14-2005 08:46 AM

On an 88 the MAS is a box style. Apex makes them for a S5 rx7 which uses a Bullet style MAS. This part will not work on a S4 like yours. Unless you have a part number I dont have, Apexi does not make one.
HKS and Blitz both make one, the HKS being closer in price to the Apexi for the S5.

TehWagon 10-14-2005 08:47 AM

i need a good but semi-inexpensive wideband... and possibly a similarly sized boost gauge (i can barely see my oem one)
thanks!

KGParts 10-14-2005 08:56 AM

How about Innovative these are very nice units and reasonable? I persoanly use MoTec and FJO to tune. The only problem I have had with Innovative is the sensors in a rotary engine due to the higher heat. They have added a lot of different options since last time I ordered one. I will have to get you prices and get back to you.
AEM's I can usualy get in a day but I am not the bigest fan of these.

What Boost gauge? (Brand and how high do you need? 30psi?) I have Defi D series and Autometer in stock.

TehWagon 10-14-2005 08:59 AM

mmmmm defi... i wish i could afford defi gauges...

yes 30 psi would be the max i would need- i don't know how they usually come, but i doubt i would truly need anything over 20! (i wish i did, but i don't...)

KGParts 10-14-2005 09:09 AM

I have an Autometer Ultra-lite boost gauge in stock. These are very reasonable. I will PM you a price now.

TehWagon 10-14-2005 09:11 AM

mmm, i haven't heard real good things about autometer,,, anythign else? thanks!
any widebands?

KGParts 10-14-2005 09:14 AM

Well, I would need to have an Idea of what you are looking for in a gauge. You said the Defi was to much, so I offered Autometer as a lower dollar option. Others like greddy and Apexi are more than the D series Defi. I will PM you a price on the Defi.

TehWagon 10-14-2005 09:17 AM

yes defi please and apexI - thanks! sorry for being unclear- but i don't really know what i'm looking for, just what i'm NOT :)

wonner 10-14-2005 09:43 AM

Quote:

Originally Posted by KGParts
On an 88 the MAS is a box style. Apex makes them for a S5 rx7 which uses a Bullet style MAS. This part will not work on a S4 like yours. Unless you have a part number I dont have, Apexi does not make one.
HKS and Blitz both make one, the HKS being closer in price to the Apexi for the S5.

I already have a HKS SMF intake installed, but the filter is dirty and I was thinking about switching to Apexi. The HKS intake came with a adapter for the MAS(square-to-round)...won't the Apexi air filter fit this adapter? If it won't fit, do you have HKS replacement air filters? Thanks for your help.

KGParts 10-14-2005 09:56 AM

I have a blue replacement for the HKS. This may be your best option. PM sent.

teh DIRT 10-14-2005 09:58 AM

greddy e-manage.

KGParts 10-14-2005 10:07 AM

Pm Sent

180sxDrifter 10-23-2005 10:45 PM

what exhuasts do you carry for a 92 240sx and prices
thanks,
Josh

Adam496 11-30-2005 10:21 PM

This may be a little late but can i get a price for (6)RC310cc injectors, greddy emanage, and a trial 38mm wastegate with a 5psi spring.

S4toSTI 11-30-2005 10:58 PM

Tial.... Keith where are my wheels.

05OCsrt-4 11-30-2005 11:01 PM

is it to late to request a price on a SAFC2?

Gdog5752 11-30-2005 11:23 PM

how about rear sway bar options for a 04 WRX NON-STI

2point4DSM 11-30-2005 11:30 PM

Keith,
Please PM me a price on an AEM standalone for a 1g DSM with all teh fixins including the wideband unit and 1000 or 1100 cc injectors (whichever I don't care if they cost the same, lol).

KGParts 12-01-2005 12:51 AM

Quote:

Originally Posted by S4toSTI
Tial.... Keith where are my wheels.

LOL, I have your wheels sitting here waiting for you. I didnt think you wanted them. I must have gotten you confused with someone else. They are here and ready to go. (BTW, they look NICE :-p )

KGParts 12-01-2005 01:04 AM

Wil, Price for injectors is $75 each and I have them in stock.
ill PM you a price on the AEM stuff in the morning. What extras were you looking for? 3.5 bar MAP sensor, and IAT sensor?

2point4DSM 12-01-2005 01:13 AM

wideband, ait, and I've got a GM 3 bar so that should be fine for now.

KGParts 12-01-2005 01:34 AM

Quote:

Originally Posted by 05OCsrt-4
is it to late to request a price on a SAFC2?

PM sent

07BlackSS 12-01-2005 04:06 AM

Hey man,

can you PM me with the prices for a walboro 255 fuel pump and a greddy turbo timer? Thanks man!

KGParts 12-01-2005 08:39 AM

Quote:

Originally Posted by Greddy2000Civic
Hey man,

can you PM me with the prices for a walboro 255 fuel pump and a greddy turbo timer? Thanks man!

PM Sent

fastjim 12-02-2005 04:01 PM

hey whats up im looking for the greddy profec b spec 2 boost controller and how much its gonna cost me to get it

300zTT 12-02-2005 10:46 PM

GREDDY PROFEC TYPE S BOOST CONTROLLER, or the greddy Profec B-Spec.2 BC or APEXI AVC-R ELECTRONIC BOOST CONTROLLER
megan racing, or defi's gauges boost, oil press, air fuel
srry long list xmas gunna be fun

D Money 12-03-2005 05:16 AM

volk gt-n (gold w/polished lip) 18x7.5 or volk le37t (gunmetal w/ polished lip) 18x7.5...Can you get me prices for these rims. Application: 03 Subaru Wrx

BlackBulletTSi 12-07-2005 10:26 PM

Greddy Profec E-01

StealthTC 12-07-2005 10:30 PM

Dont know if you can get this

Camcon VVT-i Controller by Power Enterprise

2000MRDC2 12-07-2005 11:45 PM

price on tein basics and flex's for a 92-95 Civic?

specVogel 12-28-2005 10:05 PM

i was wondering if i could get a price on a safcII in silver? thanks.

RicoGT 12-28-2005 11:31 PM

can you get me one of these?

Universal Fit Universal Fit (All - Most Japanese Motors) - GReddy Oil Filter Block Adapter (w/ M20xP1.5-70 & 3/4x16UNF-66 & 3/4x16UNF-70

Sincere 12-30-2005 09:25 PM

Can you get Advan RG2 sheel s for 05 Sti (5x114) ? offset 18x8-8.5

TROLL 12-30-2005 10:47 PM

ooh hot wheels matt.


i'm personally trying to find someone to source a tein pillowball replacement part. its not the whole pillowball mount / camber plate assembly that sells as a pair for about $200, but just the pillowball and the housing surrounding it as a replacement part for my tein flex (older style - 5kg F / 5kg R) on my 03 WRX. if you can source this please let me know how much it will be for one (or two if i must). from what i can see on their website they are relatively cheap, just havent been able to get anyone from tein to pick up their gd phone.
thanks!
bryan

KGParts 12-30-2005 11:24 PM

I will check on monday for you. I have to place an order with Tein anyway. If you remember to, email me on Sunday night or Monday morning so I dont forget to ask them.

Sincere 12-31-2005 02:41 PM

And the wheels? The silver or the gunmetal

Sincere 01-04-2006 09:52 PM

So How About Those Wheels, You Know The Rg2's


All times are GMT -4. The time now is 01:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.