TriStateTuners.com :: Home of Tristate Auto Enthusiast

TriStateTuners.com :: Home of Tristate Auto Enthusiast (http://www.tristatetuners.com/forum/index.php)
-   Off-Topic (http://www.tristatetuners.com/forum/forumdisplay.php?f=28)
-   -   ***TST's Official "Whatever" Thread*** (http://www.tristatetuners.com/forum/showthread.php?t=40740)

twistedlanes 09-13-2007 12:02 PM

is the bov in the passenger seat?

RayArroyo 09-13-2007 12:04 PM

Quote:

Originally Posted by twistedlanes (Post 661598)
is the bov in the passenger seat?

turbo is in the seat for cooling efficencies with the air on.

the bov is outside the car on the carge pipe going to the tb since louder is better:thumbup:

Snoozie 09-13-2007 12:04 PM

Quote:

Originally Posted by ray@turbotek (Post 661594)

quoting b/c this needs to be on every page

Buster 09-13-2007 12:09 PM

haha, weird!

redwrxwagon02 09-13-2007 12:10 PM

so who wants to help me lower the ass of my car tonight b4 freshworks?

twistedlanes 09-13-2007 12:10 PM

so whats that gonna run? oh and can I use my ps3 instead ofs buying an xbox?

twistedlanes 09-13-2007 12:11 PM

question....how do the tire pressure monitors in my car work if theres is noting physicalls attached?

redwrxwagon02 09-13-2007 12:13 PM

Quote:

Originally Posted by twistedlanes (Post 661614)
question....how do the tire pressure monitors in my car work if theres is noting physicalls attached?

they have little laser thing in the valve stem it sends a signal when pressure gets too low

the next time you go to get tires make sure they put them back on otherwise $$$$$$$$

twistedlanes 09-13-2007 12:15 PM

Quote:

Originally Posted by redwrxwagon02 (Post 661615)
they have little laser thing in the valve stem it sends a signal when pressure gets too low

the next time you go to get tires make sure they put them back on otherwise $$$$$$$$

okay so check this out...my tires looked a little low the other day..and one of them was so I checked and filled them to spec...ever since then the message in my car says tire pressure low. Should I have filled them then unhooked my battery or something to reset it?

redwrxwagon02 09-13-2007 12:17 PM

Quote:

Originally Posted by twistedlanes (Post 661617)
okay so check this out...my tires looked a little low the other day..and one of them was so I checked and filled them to spec...ever since then the message in my car says tire pressure low. Should I have filled them then unhooked my battery or something to reset it?

ok take it to a chebby dealership and ask them becasue i have no f*cking clue

twistedlanes 09-13-2007 12:20 PM

Lol...I'm puting my system in today so unhooking the battery is inevitable...if that doesn't work then yeah I'll check it out...the sensor is just annoying because it's lying to me.

RayArroyo 09-13-2007 12:23 PM

in the information center there is a reset

twistedlanes 09-13-2007 12:25 PM

what where?I need to buy a manual Lol

redwrxwagon02 09-13-2007 12:28 PM

ray would you be willing to lend me your fantastic jack for about half an hour before freshworks and perhaps 30 minutes of your time too?

D Money 09-13-2007 12:29 PM

I will lower it for you, to the ground!!!!!!!!

wait until you see how much im tucking stock wrx wheels. It's sooo sick, but with my camber settings it looks like a houver car that floats on the side view.

RayArroyo 09-13-2007 12:30 PM

Quote:

Originally Posted by redwrxwagon02 (Post 661633)
ray would you be willing to lend me your fantastic jack for about half an hour before freshworks and perhaps 30 minutes of your time too?

how bout if i just bring my dewalt saw and welder it will be quicker

redwrxwagon02 09-13-2007 12:31 PM

Quote:

Originally Posted by subwrxkid (Post 661635)
I will lower it for you, to the ground!!!!!!!!

wait until you see how much im tucking stock wrx wheels. It's sooo sick, but with my camber settings it looks like a houver car that floats on the side view.

lol are you hitting freshworks tonight?

redwrxwagon02 09-13-2007 12:32 PM

Quote:

Originally Posted by ray@turbotek (Post 661637)
how bout if i just bring my dewalt saw and welder it will be quicker

haha nah just the saw no welder i dont really need dampers

D Money 09-13-2007 12:36 PM

Quote:

Originally Posted by redwrxwagon02 (Post 661639)
lol are you hitting freshworks tonight?

no doubt nef-few.

Dave 09-13-2007 12:44 PM

mother ****ing word


All times are GMT -4. The time now is 12:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.