Dave I did not think I would hear those words come out of your mouth, but I totally respect you for that....With my final semester of undergrad coming to a quick close I think i need to start getting my priorities more straight haha (one being selling off my cars ;) )

On a side not i got my extended slide stop, extended slide stop lever, polished pins, I got the extended slide stop lever installed and the old pins out, but when i try to put the polished pin back into the new extended slide stop it literally will not go (tried wiggling it and moving it to every position and still will not go through) I try to put the non extended slide stop in and slides in like butter...the new polished top pin goes in no problem....I just cant get the new bottom pin in? idk what im doing wrong...

should i take the top pin out then try to put the bottom in then the top back in? I didnt get to mess with it to much since V-day and the girls up at school visiting...

Love the new extended slide stop lever and really going to like the new extended slip stop once i get it in haha..probably going to go back to all black though

Did you order directly from Lone Wolf? I was just on their site and I think I'm ordering the extended slide stop & extended slide release in black from them. How was shipping? Also try putting the bigger of the two front pins in first then go to the smaller one.

I literally hear this 20 times a month/week/day/hour from Drifty and yet he keeps getting new toys. :lol:

Does the 2nd amendment give us the right to bear arms?

http://www.usatoday.com/news/quickqu.../popup5895.htm

Not sure how old or relevant that poll is though....

I'm not speaking from personal experience with Glocks, but with my Sig in my MTAC holster (I think you said you were going with the MTAC, right?), the slide release and decocker would sink into the leather a bit and pinch against it making it very difficult to draw when you actually have your belt tight enough to keep your pants up. I tried everything, from loosening the retention screws until they were ready to fall out to leaving my belt so loose that my pants would sag. Every time I would try to draw the gun out of the holster it would hang up on the controls to the point that I would really have to force it upwards, which took the belt, holster, and pants up with it. When reholstering, it was absolutely a two-handed job. The controls stuck out enough that they would catch on the sweat guard leather piece that comes up between the slide/sight and your skin. No matter what I did the 'extended' controls on the Sig made things very difficult to work into and out of a any holster but my Serpa CQC, which is obviously all plastic and OWB. My M&P, which has no extended controls and is naturally flat like the G19 is extremely easy/fast/safe to draw and reholster one handed, even with a tight belt and tight retention set on the holster.

Make sure you keep your stock parts handy. You may find that the extended controls aren't really worth having outside a competition. Personally, I haven't pressed the slide release on my M&P since the first time I went to the range with it. With the Sig I don't think I ever did. On a mag change, the overhand 'slingshot' is more of a sure thing every time and I've done it to the point where I don't even think about it anymore. You may or may not have the same results. It's all personal preference and style of shooting I guess.

Old poll, but the answer is, "no". Neither the 2nd Amendment nor the Constitution "give" us any rights. The rights listed in the Bill of Rights are described by the people who wrote them as being natural, inalienable, human rights, granted to us by our Creator. They are rights we have simply by virtue of being alive.

The Bill of Rights is simply an enumeration of specific human rights that government is absolutely forbidden from infringing upon. It is a safe guard against tyranny.

Unfortunately, it's looked at these days as nothing more than an obstacle by many of our elected "leaders" and is rarely even mentioned unless it benefits a political agenda. :cry:

Yes i ordered from Lone Wolf, shipping was literally like 2-3 days tops super fast....Ill be working on it more later after my classes...

Thanks

Always going to keep my stock parts handy haha and my glock tool... i really like the extended slide stop lever since its the only thing i got on right (going to reorder in black) the extended slide stop felt nice too just couldnt get the pin all the way through so i took it out and put the stock one back in until i can mess with it again

Munky i got everything installed now, putting the bottom pin in before the top really helped alot gave me more wiggle room to slide the pin in...

I honestly feel its a great and really cheap upgrade, I could live with the factory size slide stop but the extended slide stop levers are a must haha (only reason i tried out the extended slide stop was because the finish was coming off the factory one and im anal)

Im going to see how i feel about the polish the next few days, my initial feeling is that i like it (a little) more probably just like the extended parts...

Most likely will be order a set of all black and just sell the polished ones cheap online or something (trial and error)

:thumbup:

Has any one put a chrome slide on a glock 19

plenty of people have done that, polished slide, polished barrel, etc...

I looked at doing it when i was looking at the polished extended parts, but do not want to do that to my G19, maybe if i pick up another one down the road i will polish it out and be a non carry piece

Port and polish everything with some custom engraving ha

I carry this that's the only reason I don't now I'm lookin at a stainless steel 1911

I had a stainless Taurus 1911 and I carried it once....ONCE!!! Got so much attention with it that I decided I'd never carry it again. I pretty much only own black shirts so it contrasted greatly when I OC'ed which is why it got noticed so much. Now I rarely get noticed when OC-ing with any of my evil black guns. The only one I get comments about now is the Kimber because of the Punisher grips.

I want the 1911 for range n household use not to carry

I do want a smaller gun for summer though kahr makes a nice 45 that's thin n small

I CC a full size 1911 almost daily.. extremely comfortable.

can i buy 12 gauge flares and fire them through my mossberg safely?

http://www.americanspecialtyammo.com/12_Gauge.html

You sir are baller haha...

http://farm6.static.flickr.com/5258/...37f80f76_b.jpg

http://farm6.static.flickr.com/5298/...8467c660_b.jpg

Extended Parts + Pins all polished...

Ordering the set in Black now....

Just picked this up off my buddy today, walther p22 with laser sight in OD green :mrgreen: I got a hell of a deal on it, I am one happy camper.. This will be receiving a suppressor shortly

http://i163.photobucket.com/albums/t...g?t=1297802199

^^Awesome little pick up