My brother had some issues with his pof, once we installed a spikes st-t2 buffer it fixed all problems. Have not fired my ar yet with the new upper, most likely won't get out til after christmas. Did run it with my brothers upper and ran 100%. This trigger is so sweet and worth the money.

That's awesome and you def got some quality parts in that build...

My 1911 should be finished tomorrow getting refinished, probably take my dad out xmass eve to throw some lead

That AR looks sick.

Oh, and I just got back into the valley, so if anybody wants to meet up and shoot, I'm free until Christmas

If anyone happens to have or know of someone that has a Hi-Point 995ts 9mm carbine for sale please let me know. Thank you.

Got around to shooting my new Mosin Nagant today at classic pistol... Man was it fun! Super scared to pull the trigger at first cause wasn't use how the kick was but wasn't to bad. Bruise very easy tho so I got some marks on my shoulders but order a rubber stock so it doesn't hurt as much! Over all very happy with my buy cheap gun cheap ammo lots of fun! Still wanna go out to a outdoor range when the weather to better.

i sold my SKS-M yesterday @ Oakes. picled up a FACOG that seems like it may be fun for a bit.

still didnt get a barrel yet. think I'm going the a BCM 14.5" but i need a local gunsmith to soder my Phantom brake on. Don't feel like buying high temp solder and crap.

Just got her back today:

Went from original Bi tone of OD frame and Black slide to Coyote Tan Frame and Black Slide:

http://farm8.staticflickr.com/7029/6...b734f24b_b.jpg

looks good, who coated it?

Thanks, pictures dont do it justice

Brian from Easton Firearms Refinishing, 3 day turn around time was incredible...

My G26 will be sent off after the new year for OD frame

steve I got your text today I was on the dyno all day dealing with traction control issues :) and couldnt even get a second to look at my phone. Now you just need to let me teach you how to shoot that beauty.

I think the only problem he has is that they can hear him shooting them in north carolina they're so freaking loud.

two works of beauty!

I figured you were busy, that pic I sent I was driving home from getting it..

Well you can teach me how to shoot it, and ill have to teach you how to shoot your glock :)

looks great, i might have to look into getting my officers coated, i have an od framed g19 in my safe never fired and i have an od g23 that i carry from time to time. cant believe how much they are selling for

.....oh and in case someone is interested a black Five-Seven just popped up on pafoa for 850, trying to think of a reason i dont need it to match the one i just got in fde

Thanks for the compliments, Brian does some good work and will def be taking my glock in after the new year...the od glock thing is a bunch of b.s people marking them up a few hundred dollars...have yet to see any of them close their for sale threads haha

Ill be fine with my cerakote od frame :)

I saw that fn and if I didn't just get the 1911 it would be mine ha

haha not for long, im really thinking about pulling the trigger on a aac 7.62sdn6 suppressor. only thing really stopping me is the wait time, im still waiting on my current suppressor to go through. its been about 6 months. im hoping its any day now.

WOW that came out really nice!

^^^Thanks for the kind words, I could not be happier about it and with the help from Dave....I am glad I switched it up from the original finish..

Although he kept telling me to do Digi Camo...Im just not that baller yet haha

Im going to head to the range to get a couple hundred of rounds down the tube (suppose to be xmass shopping) ha

Yea that 7.5" POF is LOUD. Plus is is really nice for roasting marshmellows :mrgreen:
I brought the POF and the HK51 to classic pistol a few weeks ago. I think I pissed off a few people even though it was dead. They stuck a guy with his daughter next to me. I dumped one mag out of the 51 before I could warn him and he moved to the other room. I also had a guy yell at me though the glass for rapid firing the AR(I don't think he worked there). I told him I have a full auto with me. The guys at the range didn't hassle me at all and told me I could shoot the 51 on auto when I first walked in. I really did feel bad about the guy who went in next to me. I didn't realize he got in the lane next to me. I thought he went down to the other side of the room.

Haha, what did they expect to hear the Beatles playing over the loudspeaker at a gun range :)

I want to build an SBR or at least pick up a AR pistol and possibly SBR down the road...

do it man, i built mine for around 1k give or take, including the tax stamp(not including the acog) i just bought good parts when good deals came too me. the only part i paid some what retail for was the trigger, and it was worth it. i do plan on buying a dedicated 9mm upper down the road.

Range today anyone?

Just got my 2011 back from EFR - Armour Black Cerakote

Before

http://i73.photobucket.com/albums/i2...Fusion6in1.jpg


After

http://i73.photobucket.com/albums/i2...efinished1.jpg

another pistol I love....

http://i73.photobucket.com/albums/i2.../arpistol1.jpg

^^^ ahhh thats you...I saw your pistol when Brian was putting it together... saw it in the raw too, what a transformation!

sell me that ar pistol ha

Back off sonny jim!!! If anyone gets a shot at that AR pistol it's going to be me!!! :mrgreen: Got to shoot it over the weekend and uggggghhhhhhhh now I have to have one too.

Went to the range today and had some serious problems with the Kimber.. from what I can see, it was mostly feeding issues. Used to just be one mag, but now apparently it's both. Full or almost full stacks.. sometimes I'd rack the slide and it wouldn't cycle the whole way and the round would get stuck halfway in or I'd fire once then the slide would stay locked with a full mag in it.

Think it is just the crappy factory mags or is there something else I need to worry about?

*Edit- I spoke to the guy at the range I've known for a while now and he said it could either be the fact that the springs in the mags are so new they need to be broken in or that I was using the 230 grain rounds and the gun didn't like them. Thoughts?

Im not too familiar with the Kimber frame, but can try to offer some advice..

1. Is the barrel a fully supported ramped barrel (im guessing it is)?
2. Where you using FMJ or JHP?
3. Where the barrel ramp meets the frame inside the gun is there a decent lip that gets created between the frame and the barrel ramp? (might need to sand or polish that down to be more flush)

I had some feeding issues with my one mag from the factory, but not the other...I did some investigating and saw a place for the JHP to get a little snagged on between the frame and the ramp of the barrel (could have been the follower on the mag, but)...I polished this area and the ramp of the barrel and I dont have issues with either of the factory mags now with JHP

Idk why the gun wouldnt like the 230 grain?

Im sure Munky, Dave, and others can chime in better on...Im still young padawan with the 1911

Not sure, it's not in front of me and I can't access it at this moment.
I was using FMJ
Again, not sure, I need to look at closely tomorrow.

I keep hearing that the factory mags are junk... I hope that's all it is..

Yes factory mags are very suspect. What kimber do you have ? UCII have been know to be rather tight from the factory if new. I would try a couple things.

1. Load the magazine to capacity and let them sit for a bit

2. Run the gun pretty wet and try to put a couple hundred rounds thru it (if its new)

3. Have someone else shoot it. Not saying your limp wristing it but just to rule out your grip.

4. borrow some other mags

5. Sale it to me for cheap and by a glock :devil:

Yep, it's an UCII with less than 1,000 rounds through it.

1. Already did... both have been full since the day I got it back in October.

2. It's not super wet, but I did break it down and oil/grease everything pretty liberally but without making a mess

3. I could be... I have a paper that explains why shots go where and a few of my rounds ended up in that area ( I'll post a pic of it soon)

4. I think I'm going to invest in different mags soon (very soon)

5. Yeah right... lmao

well my dakota tactical mp5 navy pistol was shipped out two days ago, hoping she comes before christmas. can't wait. then i plan on ordering a mp5k navy from the same company.

^^^mp5 mmmm

ar pistol win. i want a 10.5" one but i want my 16" middy done first. I just ordered a RRA Lightweight 16" mid stripped bbl, and gas block stuff yesterday. im goin with centurion arms 10" C4 rail.

http://i16.photobucket.com/albums/b3...3/3dd98b74.jpg

FACOG was $140. imma try it out. if its crap I'll just airsoft it. I'm gonna be 90% CMMG .22lr with this one so it should be fine.


oh. im also gonna remove a recoil spring from the GSG5SD and run CB Long's through it :D

Anyone have any feedback on Romanian WASR-10 "AK47"?

I'm tossing between that or maybe a 1960s Polish with a milled and dimpled reciever, a bit more money, but seems like a more solid gun.

i would go with the milled polish, i have seen a few in person, they seem to be pretty well built guns. i really dont care for the wasr-10, seen a few with some problems. i remember when they were 200 bucks. if you really want a nice ak, go with a arsenal.

polishhhhhh

Milled > Stamped, dimpled > Wasr single stack civilian market poopies.

we already talked alex!! lol

Just received my Comp-Tac for the 1911, just in time for the holidays :)

Will be wearing it around the house for a little until it breaks in some and loosens up then will be thrown into the rotation of carry...

my barrel arrived today!

http://i16.photobucket.com/albums/b3...3/bb69864c.jpg

http://i16.photobucket.com/albums/b3...3/3c678a26.jpg

now i gotta decide.....magpul FDE or OD for my AR colors

Hey AR guys... look here -----> 5.56 M855 green tip for sale

Driving through Nazi Jersey right now... I feel so naked without the gun on my side...