My 2006 STI Buildup - Mod List and a few Pictures.

[Mac323]

Whatsup guys. I signed up for this forum a while ago but i've just been lacking on checking it for a while... Been busy with school, work and all that crap.

Now that its spring, I finally get to start working on the car again and installing all the parts i've been collecting over the past few months. Its going to be an interesting few weeks.

Heres what the mod list will be once I get a chance to finish this round of modifications.

2006 Steel Grey STI - 18k Miles

Engine:
-Forced Performance HTA 3076 Turbo
-ATP Divided T3 (Twinscroll) .78 ar Hotside (heatcoated)
-Full Race Twinscroll Exhaust Manifold (heatcoated)
-Full Race Twinscroll Uppipe with Dual Wastegates (heatcoated)
-Two Tial 44mm External Wastegates (RED) with 14psi spring
-Custom Dump Tubes for EWG's
-Tial 50mm Atmospheric BOV (RED)
-Custom Rotated 3" Downpipe
-APS 3" Single Tip Catback Exhaust
-Perrin SS Oil Line for Turbo
-APS SS Fuel Rail Kit (Rails/Lines/Fittings)
-DW 850cc Side Feed Injectors
-Custom SS Power Steering Line
-Custom 3.5" Intake
-Cobb 3.5" BIG MAF
-Grimmspeed Phenolic 8mm Spacers
-APS TGV Deletes
-Reversed STI Manifold (Ported)
-Custom 2.5" I/C Piping
-APS 725 FMIC
-Koyo Aluminum Radiator
-ARC Upgraded Thermostat
-Samco Radiator Hoses
-Crawford Air Oil Seperator (Catch Can) --------------(Ordering Soon)
-ARP Headstuds
-Weisco Stock Bore Forged and Coated Pistons -------(Ordering Soon)

Suspension:
-BC Racing Inverted Coilovers w/ Camber Plates
-Ingals Rear Camber Bolts
-Cobb Front and Rear Swaybars
-Kartboy Front and Rear Endlinks
-Cusco Front and Rear Strut Bars

Wheels/Tires:
-Enkei RP03 (Silver) in 17x9.5 +38
-Yokohama Advan Neova AD07 (255/40/17)
-SR48 Black Extended Lug Nuts
-ARP Extended Wheel Studs ------------------------(Ordering Soon)
-A LOT OF FENDER CUTTING AND ROLLING!

Drivetrain:
-Cusco Twin Plate Clutch --------------------------(Ordering Soon)
-Kartboy Upgraded PitchStop Mount
-GoFastBits Adjustable Short Shifter
-ARC Titanium Shift Knob
-Cusco Hardend Motor/Transmision Mounts

Exterior:
-Replica V-Limited Front Lip (Painted Steel Grey)
-WRX Sideskirts (Painted Steel Grey)
-JDM Rear Spats (Painted Steel Grey)
-Wingless Trunk
-Trunk with WRX Wing
-Spec C Roof Vent
-JDM Rainguards
-Painted / Cleared Headlights

Brakes: -------------------------------------------(Need To Order After Turbo install)
-Hawk Brake Pads
-Goodrich SS Brake Lines
-Dot 4 Brake Fluid
-Powerslot Front and Rear Slotted Rotors
-Perrin Brake Master Cylinder Brace
-Powdercoated Black Brembos

Interior:
-FULL WRX Interior Swap (HATED THE BLUE)
-Alpine Headunit
-Alpine Ipod Interface
-Alpine Sirius Satalite Radio Interface
-DIY Black Dash
-JDM Hazard Button
-Forrester Din Pocket
-Defi Gauges (BF Amber) - Boost/ETG/Oil Pressure
-Defi V2 Control Unit
-Defi Gauge Pod
-Innovate Wideband Air Fuel Ratio Gauge
-STI Floormats

Thats about all i can think of. I really dont think im forgetting anything. I'm also waiting on a 1.06ar Divided T3 Hotside for the turbo but they wont be released by garrett or atp for another few months. Would also like to pick up a set of Sparco Evo2 Seats sometime this summer.

Post up any comments or questions. I'm currently at my house in CT and the car is at home in NY getting ready for the turbo install. Will be droping the car off at MSPT (Metric Subaru) in Long Island thursday as I simply dont have the time right now to do the install. Will take some pictures on thursday before I take the car to the shop.

-Greg

















Sorry for the crappy picturs... I have better pictures on my computer in NY and will take some more as soon as i get a chance. BTW.. the car is about an inch lower all around now... Its a little high in the pictures.

[CHAOS]

eww its mac lol...
<--chaos311clarity on iwsti

car looks great man.

[the mike]

Well ****ing done. I like this one a lot. What is the badge on the trunk?

[Mac323]

Originally Posted by the mike

Well ****ing done. I like this one a lot. What is the badge on the trunk?

Thanks man. The badge on the back is a JDM legacy bag. I didnt want the STI badge anymore but i needed something... I thought the 2.5rs badge was crap since i own an sti...

This badge says "2.5 sti tuned" so it works out perfectly... A lot of people still think its an RS though =)

[Mac323]

Originally Posted by CHAOS

eww its mac lol...
<--chaos311clarity on iwsti

car looks great man.

LOL watsup dude? A lot of IWSTI'ers on here?

[D Money]

this guy....

did you ever take the picture from behind so I can see the tires? You take forever!

[Mac323]

Originally Posted by subwrxkid

this guy....

did you ever take the picture from behind so I can see the tires? You take forever!

Relax D... I just finished cutting, rolling and hammering out the fenders to make these things fit. I'll get you some pictures on thursday when i go home to take the car to metric. I dont have the car right now.

Here are some pics dave took after we did the fender mods. Not what your looking for but it gives you an idea.

[CarbonIS]

whats up greg, this car is so so so so so sick.

[Mac323]

Mean's a lot coming from you... Thanks bro!

Wanna trade =)

[Seven]

just curious what type of power it makes or trap speeds it achieves.

[joe tom]

beautiful! i love everything about your car, well put together!

[D Money]

<3<3<3

[TROLL]

really nicely done... looking forward to seeing your results with this setup.

[CarbonIS]

this is the one i was talking about bryan

[05suby]

nice car. i love wingless STi's

[Mac323]

Thanks Guys.

To answer your question Seven.... The car dyno'd 338 whp and 362 wtq on a dyno dynamics before the turbo setup goes in. That setup consists of te following.

-Stock VF39 (Wastegate welded shut)
-Vibrant Unequal Length Header
-Custom Uppipe Flanged for Tial 44mm EWG
-Tial 44mm EWG
-APS Turbo Inlet
-APS Short Ram Intake
-APS TGV Deletes
-APS 525 Front Mount Intercooler
-APS 3" TBE (Catless)
-Walbro Fuel Pump
-Stock Injectors and maf MAXED at 22psi.

As for trap, i couldnt tell you.. I had a lot of issues with this car last summer that had to be fixed... The list time i went to e-town was when the car had a full exhaust, intake and protune at mspt.

-Greg

[HighOctane]

WOw, so clean! I love it. What is that thing on the sideskirt?

[Mac323]

Originally Posted by HighOctane

WOw, so clean! I love it. What is that thing on the sideskirt?

The extensions on the sideskirts are made by liberal...an uber jdm company... Bill knows what i'm talking about. I sold them though which is why they arent listed in the modlist.

[otaku64]

Very clean.

Good job!

- sal campo

[DPancoast]

car looks awesome! Impressive mods list too!