anybody have a OBDII scanner to reset my CEL real quick? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

truthbetold · 04-11-2011, 01:25 PM

hey does anybody have a OBDII scanner to reset my CEL real quick? I try to go to autozone and advance auto parts but it is against their policy to reset. I live in south philadelphia but willing to drive.

RedBowTies88 · 04-11-2011, 01:29 PM

what kind of car? not every scanner will work with every ecu

truthbetold · 04-11-2011, 01:36 PM

Quote:

Originally Posted by RedBowTies88

what kind of car? not every scanner will work with every ecu

oops sorry 2002 nissan sentra . I disconnected the battery and the CEL went off but the OD light still blinks. I dont know if the code is still stored or reseted completely.

RedBowTies88 · 04-11-2011, 01:42 PM

Overdrive light? f there is an actual problem chances are the light will come back 5 minutes after you clear it

truthbetold · 04-11-2011, 01:45 PM

Quote:

Originally Posted by RedBowTies88

Overdrive light? f there is an actual problem chances are the light will come back 5 minutes after you clear it

I been driving around for 3 days and the OD light still blinks 16 times when i start it. People been telling me i didnt properly reset the ECU so the code is still stored in the ecu even though i fix the problem.

httrdd · 04-11-2011, 04:31 PM

Did you ground the wires to the chassis after you pulled the cables off the battery?

dsmtuner · 04-11-2011, 04:36 PM

Yeah I could probably reset it for you if you bring it to me in norristown. But you can buy those little code readers and reset it yourself for like 30-40 bucks, and then you'll have your own for next time. I recently got a pretty nice one from mac tools that shows you a live data stream with things like fuel trims, o2 voltages, misfires, etc., for like 120 dollars.

fl4tFTW · 04-11-2011, 04:46 PM

You do realize resetting it does nothing but make the light go away? You still have a DTC stored in your ECU. The only way to get rid of it is to fix the problem and complete a certain drive cycle(s). Resetting the ECU will also make the code go away(and any stored DTCs), but it will most likely come back if you don't fix the problem. Also, your readiness monitors will be not ready until you complete the drives cycles needed by your ECU.

Supraru · 04-11-2011, 08:34 PM

Quote:

Originally Posted by fl4tFTW

You do realize resetting it does nothing but make the light go away? You still have a DTC stored in your ECU. The only way to get rid of it is to fix the problem and complete a certain drive cycle(s). Resetting the ECU will also make the code go away(and any stored DTCs), but it will most likely come back if you don't fix the problem. Also, your readiness monitors will be not ready until you complete the drives cycles needed by your ECU.

It'll clear the ecu. But yes if you have an actual problem it will be back shortly. Only thing I ever really reset is a random misfire from the light flywheel. Lucky for me I haven't really had one in a year or so but I do have two scanners to clear it with.

JSpecV03 · 04-11-2011, 09:15 PM

like everyone else said, if you clear your light it will just come right back on. if its on for OD then the tranns ecu (TCM) needs to be read by nissan with a consult 2 computer(dealer scan tool) or maybe the high end snap on verus or modis or scanners like that can read it as well. also the emissions readyness monitors will be reset and you'll have to complete several drive cycles with the vehical under load to reset them.
what is the actual code number being shown? if you gimme the code i can pull the info for you

i have an fsm for the 2003 nissan sentra and it cover all models. 02-03 are the same.

twastheglow · 04-12-2011, 08:30 AM

Quote:

Originally Posted by truthbetold

I been driving around for 3 days and the OD light still blinks 16 times when i start it. People been telling me i didnt properly reset the ECU so the code is still stored in the ecu even though i fix the problem.

Quote:

Originally Posted by fl4tFTW

You do realize resetting it does nothing but make the light go away? You still have a DTC stored in your ECU. The only way to get rid of it is to fix the problem and complete a certain drive cycle(s). Resetting the ECU will also make the code go away(and any stored DTCs), but it will most likely come back if you don't fix the problem. Also, your readiness monitors will be not ready until you complete the drives cycles needed by your ECU.

Quote:

Originally Posted by Supraru

It'll clear the ecu. But yes if you have an actual problem it will be back shortly. Only thing I ever really reset is a random misfire from the light flywheel. Lucky for me I haven't really had one in a year or so but I do have two scanners to clear it with.

He claims he fixed the problem.

Godofelru · 04-12-2011, 10:06 AM

If you fixed the problem unplug your ecu & then pLug it back in. Drive for ~30 miles. Problem solved.

Maxxdsix · 04-12-2011, 10:13 AM

Or just go to pep boys, they do it for free

EklipzGSXkid · 04-12-2011, 10:16 AM

I'm in Hazleton PA, 18201 and can also do it for you. 6pm-3am.

twastheglow · 04-12-2011, 10:25 AM

Quote:

Originally Posted by EklipzGSXkid

I'm in Hazleton PA, 18201 and can also do it for you. 6pm-3am.

I just wanted to give you props...I've read a lot of posts you've made lately where you've offered up your time to help people out. I think that's pretty BA of you. Now please excuse me while I climb down off your nuts.

TNTramair · 04-13-2011, 08:58 AM

if you have a smartphone (android or Iphone) you can purchase an app called Torque....There's a free version and a pay version..its $5.99...you'll want that one.

go on ebay and purchase one of these:

http://cgi.ebay.com/ebaymotors/Bluet...motiveQ5fTools

for $25.00 you can do just about everything you need including some other very cool features. its like a Gtech pro with the ability to read scan and clear codes...IT also displays real time data with gauges etc. data logging is also available i believe.

EklipzGSXkid · 04-13-2011, 11:06 AM

twastheglow: Thank you . As long as it's nothing major, I'm always willing to help out for free !!

twastheglow · 04-13-2011, 12:01 PM

Quote:

Originally Posted by EklipzGSXkid

twastheglow: Thank you . As long as it's nothing major, I'm always willing to help out for free !!

Regardless, I think that says a lot about you. And you're welcome.

fl4tFTW · 04-13-2011, 02:32 PM

Quote:

Originally Posted by TNTramair

if you have a smartphone (android or Iphone) you can purchase an app called Torque....There's a free version and a pay version..its $5.99...you'll want that one.

go on ebay and purchase one of these:

http://cgi.ebay.com/ebaymotors/Bluet...motiveQ5fTools

for $25.00 you can do just about everything you need including some other very cool features. its like a Gtech pro with the ability to read scan and clear codes...IT also displays real time data with gauges etc. data logging is also available i believe.

That's sweet. Thanks!

Edit: Don't see that app in the app store.

TNTramair · 04-13-2011, 03:18 PM

Quote:

Originally Posted by fl4tFTW

That's sweet. Thanks!

Edit: Don't see that app in the app store.

iphone? might be called something differant but i know its there. Torque is on android market.

edit...i think its called REV on iphone...try that.

04-11-2011, 01:25 PM	#1
truthbetold Tri-State Training Wheels Join Date: Apr 2010 Member #16293 iTrader: (0)	anybody have a OBDII scanner to reset my CEL real quick? hey does anybody have a OBDII scanner to reset my CEL real quick? I try to go to autozone and advance auto parts but it is against their policy to reset. I live in south philadelphia but willing to drive.

04-11-2011, 01:29 PM	#2
RedBowTies88 Tri-State Post Whore Join Date: Jul 2010 Location: Cape May County Member #16880 My Ride: car? iTrader: (0)	what kind of car? not every scanner will work with every ecu __________________ Beech - Thats my real name ;) Nobody On This Forum Cares About Real Performance ^If you disagree prove me wrong To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-11-2011, 01:42 PM	#4
RedBowTies88 Tri-State Post Whore Join Date: Jul 2010 Location: Cape May County Member #16880 My Ride: car? iTrader: (0)	Overdrive light? f there is an actual problem chances are the light will come back 5 minutes after you clear it __________________ Beech - Thats my real name ;) Nobody On This Forum Cares About Real Performance ^If you disagree prove me wrong To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-11-2011, 04:31 PM	#6
httrdd Tri-State Addict Join Date: Dec 2009 Location: NEPA Member #15277 My Ride: 99 Black Legacy GT H6 iTrader: (1)	Did you ground the wires to the chassis after you pulled the cables off the battery? __________________ 2000 Dakota QC- His 2007 Nissan Xterra- Hers This spot blank for upcoming project car! To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

04-11-2011, 04:36 PM	#7
dsmtuner Tri-State Aficionado Join Date: Jun 2006 Member #2090 My Ride: 93 Eagle Talon TSI AWD(The Racecar), 02 Audi A4(The Daily) iTrader: (2)	Yeah I could probably reset it for you if you bring it to me in norristown. But you can buy those little code readers and reset it yourself for like 30-40 bucks, and then you'll have your own for next time. I recently got a pretty nice one from mac tools that shows you a live data stream with things like fuel trims, o2 voltages, misfires, etc., for like 120 dollars. __________________ Doug

04-11-2011, 04:46 PM	#8
fl4tFTW Tri-State Aficionado Join Date: Dec 2010 Location: Central PA Member #18757 My Ride: 2001 Subaru Impreza 2.5RS iTrader: (0)	You do realize resetting it does nothing but make the light go away? You still have a DTC stored in your ECU. The only way to get rid of it is to fix the problem and complete a certain drive cycle(s). Resetting the ECU will also make the code go away(and any stored DTCs), but it will most likely come back if you don't fix the problem. Also, your readiness monitors will be not ready until you complete the drives cycles needed by your ECU.

04-11-2011, 09:15 PM	#10
JSpecV03 Tri-State Post Whore Join Date: Nov 2007 Location: Lansdale, Pa Member #6345 My Ride: 2006 Acura TSX,1996 Jeep Cherokee Sport 4x4 4.0, and cammed out Spec V with a blown motor. iTrader: (1)	like everyone else said, if you clear your light it will just come right back on. if its on for OD then the tranns ecu (TCM) needs to be read by nissan with a consult 2 computer(dealer scan tool) or maybe the high end snap on verus or modis or scanners like that can read it as well. also the emissions readyness monitors will be reset and you'll have to complete several drive cycles with the vehical under load to reset them. what is the actual code number being shown? if you gimme the code i can pull the info for you i have an fsm for the 2003 nissan sentra and it cover all models. 02-03 are the same. __________________ 1996 Jeep Cherokee Sport 4x4 4.0 work horse 2003 Nissan Sentra Se-R Spec V, needs a motor. 2006 Acura TSX, soon to be low and slow. Every Nasty Vehical Illustrates Our Useless Spending Last edited by JSpecV03; 04-11-2011 at 09:28 PM.

04-12-2011, 10:06 AM	#12
Godofelru Tri-State Addict Join Date: Jul 2009 Location: Pitman, NJ Member #14116 My Ride: Turbo 07 Spec V @ 11psi iTrader: (0)	If you fixed the problem unplug your ecu & then pLug it back in. Drive for ~30 miles. Problem solved.

04-12-2011, 10:16 AM	#14
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	I'm in Hazleton PA, 18201 and can also do it for you. 6pm-3am.

04-13-2011, 08:58 AM	#16
TNTramair Tri-State Post Whore Join Date: Jan 2006 Location: philly Member #1299 iTrader: (0)	if you have a smartphone (android or Iphone) you can purchase an app called Torque....There's a free version and a pay version..its $5.99...you'll want that one. go on ebay and purchase one of these: http://cgi.ebay.com/ebaymotors/Bluet...motiveQ5fTools for $25.00 you can do just about everything you need including some other very cool features. its like a Gtech pro with the ability to read scan and clear codes...IT also displays real time data with gauges etc. data logging is also available i believe. __________________ 2000 Trans Am WS.6 m6 402/RKT t56/MWC 9" 2004 Audi A4 Quattro Stock 2012 Camry SE/SE Stock 2006 Yamaha R1 50th ann. Last edited by TNTramair; 04-13-2011 at 09:02 AM.

04-13-2011, 11:06 AM	#17
EklipzGSXkid Tri-State Post Whore Join Date: Apr 2007 Location: PA Member #4554 iTrader: (13)	twastheglow: Thank you . As long as it's nothing major, I'm always willing to help out for free !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OBDII Reader/Scanner question	STiGuy06	Engine Management and Tuning	4	04-13-2011 11:33 AM
Williamsport Need Obdii Scanner Tonight	dragonfly2k3	Pennsylvania	0	04-30-2008 10:03 AM
hey real quick question	clutchmaster	Honda / Acura Talk	4	10-02-2007 02:16 PM
Need some advice real quick...	whitezenki	Gallery	14	07-17-2007 11:11 PM