What Did You Do To Your Mazda Today!!! - Page 11 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

CleanNeon98 · 07-19-2009, 07:42 PM

Quote:

Originally Posted by l337fpc

They will come off before i hit the road courses, then I'll make a series of thin LED bars that won't move at all. That way I won't have to worry about taking them off before I hit the track again.

Never-ending battle. I give up.

SvicksTc · 07-19-2009, 10:55 PM

well beside adding oil haha, i checked my plugs and coil packs and although they are not burnt im going to order a set because im right around 35k miles and they are known to not last to long ha, and I debated on removing my VFAD....

Looking on rx8club this seems 50/50

l337fpc · 07-20-2009, 06:31 AM

Quote:

Originally Posted by SvicksTc

well beside adding oil haha, i checked my plugs and coil packs and although they are not burnt im going to order a set because im right around 35k miles and they are known to not last to long ha, and I debated on removing my VFAD....

Looking on rx8club this seems 50/50

I'd get BHR's Ignition System. It's on my list of things to buy. I just got my coils and plugs replaced on my 60,000mi service, so there isn't a need to buy new ones just yet for me.

oneday · 07-21-2009, 05:11 PM

I went to the track.

More from the track.

The best $200 I've spent in months.

Outlawstar98 · 07-21-2009, 07:52 PM

mazda FTW! lol

driftingrx5.7 · 07-22-2009, 11:45 PM

well spent 4 horus rewiring my wiring harness and finding all my problems and got it all fixed and its alive again!!

CleanNeon98 · 07-22-2009, 11:46 PM

Finally bought a new waterpump/alternator belt cause mine is in piss poor shape. Will install tomorow if it doesn't rain

Erik · 07-22-2009, 11:47 PM

awesome! i tried installing a oil pressure guage into my dash. failed due to lack of big enough tools (lame) and ended up installing a voltmeter instead......

l337fpc · 07-23-2009, 06:34 AM

Quote:

Originally Posted by Erik

awesome! i tried installing a oil pressure guage into my dash. failed due to lack of big enough tools (lame) and ended up installing a voltmeter instead......

Dude i've got almost any tool you'd need, minus air tools.

Erik · 07-23-2009, 11:46 AM

Quote:

Originally Posted by l337fpc

Dude i've got almost any tool you'd need, minus air tools.

i coulda sworn the damn sensor was 3/4 but it was a little bigger. I dont have anything larger than 3/4 in either wrench or wratchet. whatta bitch. If you wanna install that oil pressure guage, lemme know

l337fpc · 07-23-2009, 12:04 PM

Quote:

Originally Posted by Erik

i coulda sworn the damn sensor was 3/4 but it was a little bigger. I dont have anything larger than 3/4 in either wrench or wratchet. whatta bitch. If you wanna install that oil pressure guage, lemme know

Well the next 2 weekends are jammed, but after that i'm good. Let me know when you've got time.

Erik · 07-23-2009, 12:10 PM

yea, its not hard. its just popping the screw adapter out, new one in, running the tubing and install the gauge. I gotta find a place on the dash for it

DaneMX5 · 07-23-2009, 12:11 PM

buck came inches from enihilated my miata last night. AWESOME...

pizzo2007 · 07-23-2009, 04:56 PM

well since my driveline is all from mazda...

left front lower ball joint and left front axle yesterday

Erik · 07-24-2009, 12:58 AM

^^i can relate to that. I share chassis with the ford escort zx2. motor, most of the suspension, few transmissions depending on year.

driftingrx5.7 · 07-24-2009, 11:26 AM

spent most of lastnight putting the interior back together got to rewire the amp and she is set to go!

l337fpc · 07-29-2009, 06:22 PM

Can some one say, I have a new project...

Outlawstar98 · 08-05-2009, 04:37 PM

Hood Props installed and working

Next mod? IDK yet hahah, Prob a carbon lip

l337fpc · 08-06-2009, 07:54 AM

Carbon lips are always a good call.

Hopefully by next summer i'll have a CF hood, Lip (Front and Rear), and side skirts. Hopefully....

Outlawstar98 · 08-06-2009, 06:05 PM

Im going to have... (on the outside of my car)

Carbon Hood
Carbon Lip
Carbon lip on the Lip (i know right lol)
Carbon Side Skirts
Carbon Rear skirt
Carbon Trunk
Carbon Roof
Carbon Gas door
Carbon Mirrors
Carbon Eyelids
Carbon Grill

And I think thats it, Oh, and maybe canards haha

By the end of this year

07-19-2009, 10:55 PM	#202
SvicksTc Tri-State Post Whore Join Date: Apr 2008 Location: Spoolin a Snail Member #7395 My Ride: Nike 6.0 iTrader: (1)	well beside adding oil haha, i checked my plugs and coil packs and although they are not burnt im going to order a set because im right around 35k miles and they are known to not last to long ha, and I debated on removing my VFAD.... Looking on rx8club this seems 50/50 __________________ Why V-tec When there is To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. ? \|Nikon\| Twitter: To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

07-21-2009, 05:11 PM	#204
oneday Tri-State Addict Join Date: Jul 2007 Location: Holland Member #5367 My Ride: E36 M3 Coupe iTrader: (0)	I went to the track. More from the track. The best $200 I've spent in months. __________________ Saving for more track time.

07-21-2009, 07:52 PM	#205
Outlawstar98 Tri-State Post Whore Join Date: Feb 2008 Location: Pottstown PA Member #6940 My Ride: 06 BMW; 13 BRZ iTrader: (0)	mazda FTW! lol __________________ Upcoming Mods:Big spoiler and Superchargerrrrrrrrrr, OMG SO MUCH MONEY D: Why Did I Get Into Cars?!

07-22-2009, 11:45 PM	#206
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	well spent 4 horus rewiring my wiring harness and finding all my problems and got it all fixed and its alive again!! __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

07-22-2009, 11:46 PM	#207
CleanNeon98 TST Ruined My Life! Join Date: Jun 2006 Location: Philadelphia Member #2029 My Ride: "Honey Badger" Turbo Miata iTrader: (8)	Finally bought a new waterpump/alternator belt cause mine is in piss poor shape. Will install tomorow if it doesn't rain __________________ 2004 MAZDASPEED MX-5 : 328whp / 308wtq / 2500lbs 2012 Toyota Prius 2 : Daily Driver

07-22-2009, 11:47 PM	#208
Erik Tri-State Post Whore Join Date: May 2006 Location: Glenside, PA Member #1962 My Ride: 2001 Audi A6 2.7 Twin Turbo iTrader: (4)	awesome! i tried installing a oil pressure guage into my dash. failed due to lack of big enough tools (lame) and ended up installing a voltmeter instead...... __________________ --Eric '96 Mazda Miata \| FM V-Maxx Coilovers \| Jackson Racing Exhaust/Intake GONE To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 01' Audi A6 2.7 Twin Turbo \| Daily \| NoMods

07-23-2009, 12:10 PM	#212
Erik Tri-State Post Whore Join Date: May 2006 Location: Glenside, PA Member #1962 My Ride: 2001 Audi A6 2.7 Twin Turbo iTrader: (4)	yea, its not hard. its just popping the screw adapter out, new one in, running the tubing and install the gauge. I gotta find a place on the dash for it __________________ --Eric '96 Mazda Miata \| FM V-Maxx Coilovers \| Jackson Racing Exhaust/Intake GONE To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 01' Audi A6 2.7 Twin Turbo \| Daily \| NoMods

07-23-2009, 12:11 PM	#213
DaneMX5 Tri-State Training Wheels Join Date: May 2009 Location: New Hope, Pa Member #13611 My Ride: 03 e39 M5 iTrader: (0)	buck came inches from enihilated my miata last night. AWESOME... __________________ Dflann

07-23-2009, 04:56 PM	#214
pizzo2007 Tri-State Training Wheels Join Date: Feb 2007 Location: Denver, PA Member #3717 My Ride: 2.7L Probe GT iTrader: (0)	well since my driveline is all from mazda... left front lower ball joint and left front axle yesterday __________________ ...it's not your typical Ford Probe

07-24-2009, 12:58 AM	#215
Erik Tri-State Post Whore Join Date: May 2006 Location: Glenside, PA Member #1962 My Ride: 2001 Audi A6 2.7 Twin Turbo iTrader: (4)	^^i can relate to that. I share chassis with the ford escort zx2. motor, most of the suspension, few transmissions depending on year. __________________ --Eric '96 Mazda Miata \| FM V-Maxx Coilovers \| Jackson Racing Exhaust/Intake GONE To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 01' Audi A6 2.7 Twin Turbo \| Daily \| NoMods

07-24-2009, 11:26 AM	#216
driftingrx5.7 Tri-State Post Whore Join Date: Dec 2006 Location: Poconos PA Member #3099 My Ride: 88 rx5.7 iTrader: (0)	spent most of lastnight putting the interior back together got to rewire the amp and she is set to go! __________________ my v8 rx7build To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

07-29-2009, 06:22 PM	#217
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	Can some one say, I have a new project...

08-05-2009, 04:37 PM	#218
Outlawstar98 Tri-State Post Whore Join Date: Feb 2008 Location: Pottstown PA Member #6940 My Ride: 06 BMW; 13 BRZ iTrader: (0)	Hood Props installed and working Next mod? IDK yet hahah, Prob a carbon lip __________________ Upcoming Mods:Big spoiler and Superchargerrrrrrrrrr, OMG SO MUCH MONEY D: Why Did I Get Into Cars?!

08-06-2009, 07:54 AM	#219
l337fpc Tri-State Addict Join Date: Oct 2008 Member #9093 My Ride: 2004 Mazda RX-8 GT iTrader: (0)	Carbon lips are always a good call. Hopefully by next summer i'll have a CF hood, Lip (Front and Rear), and side skirts. Hopefully....

08-06-2009, 06:05 PM	#220
Outlawstar98 Tri-State Post Whore Join Date: Feb 2008 Location: Pottstown PA Member #6940 My Ride: 06 BMW; 13 BRZ iTrader: (0)	Im going to have... (on the outside of my car) Carbon Hood Carbon Lip Carbon lip on the Lip (i know right lol) Carbon Side Skirts Carbon Rear skirt Carbon Trunk Carbon Roof Carbon Gas door Carbon Mirrors Carbon Eyelids Carbon Grill And I think thats it, Oh, and maybe canards haha By the end of this year __________________ Upcoming Mods:Big spoiler and Superchargerrrrrrrrrr, OMG SO MUCH MONEY D: Why Did I Get Into Cars?!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RHD Mazda 6	Maxxdsix	(Past Vendors)	2	08-26-2010 01:12 PM
The Mazda MX-3	wheresmycar	General Car Related Chat	5	07-12-2009 05:43 PM
'88 mazda rx-7 n/a...(for now)..	fc3spower	Member Journals	7	06-01-2008 09:08 PM
Took these today thought they were cool...EDIT more pics added from today!!!	S4toSTI	Gallery	20	10-24-2005 09:06 PM