Engine Rebuild - TriStateTuners.com :: Home of Tristate Auto Enthusiast

AutobahnRacer · 04-30-2007, 10:38 PM

heres the parts i have so far but waht else am i missing and do these prices sound about right. i have a 97 VTEC H22a(4? or 1? dunno)

Cam 168.42
168.42

CamShaft 862.77

Head Gasket 50.00

Pulleys 208.90

Vavle Springs 255.00

Vavle 200.00

Pistons 500.00

Labor 1200.00

Shipping Parts 300.00

All to about 4212.61

so what else am i missing. btw some of the parts are AEM and stuff im trieing to stay away from OEM

na is best! · 05-25-2007, 02:24 PM

wow.. pretty expensive.. wished you would have told me I can of gotten you stuff a whole hell of a lot cheaper... 1200 for labor? does that include headwork? Por and polish, valve job, port matching, balancing the rank??? my machine work was 1200 but i had a whole lot done to my motor

862 for cams??? what cams are you running? I paid 520 for my buddy club cams

head gasket looks ok price.... what pulleys are you getting? My crank pully I got for $80 a N1.. for valetrain I paid 430 for valves, springs, retainers, all supertech.. ferrea valve guides were 80 and head studs and rod bolts were 150 arp.... and 800 for forged pistons and rods...

that is my prices i got for my build.. not sure if h series is more or what.. get at me if you need anything

as far as missing i like to always build with head bolts, rod bolts, and main bolts...you are gonna need bearings and rings..uhmm... injectors, cm gears, fuel rail and regulator, water pump, timing belt, maganetic drain plug, header, intake manifold, throttle body, there are tos more that can be done.. all depending on your budget and goals

BCSpeed · 05-26-2007, 04:01 PM

1200. is a bit steep for an engine build unless its a full build as stated.

04-30-2007, 10:38 PM	#1
AutobahnRacer Tri-State Post Whore Join Date: Jun 2006 Location: TriState, PA Member #2056 iTrader: (3)	Engine Rebuild heres the parts i have so far but waht else am i missing and do these prices sound about right. i have a 97 VTEC H22a(4? or 1? dunno) Cam 168.42 168.42 CamShaft 862.77 Head Gasket 50.00 Pulleys 208.90 Vavle Springs 255.00 Vavle 200.00 Pistons 500.00 Labor 1200.00 Shipping Parts 300.00 All to about 4212.61 so what else am i missing. btw some of the parts are AEM and stuff im trieing to stay away from OEM

05-25-2007, 02:24 PM	#2
na is best! Tri-State Aficionado Join Date: Feb 2007 Member #3643 iTrader: (0)	wow.. pretty expensive.. wished you would have told me I can of gotten you stuff a whole hell of a lot cheaper... 1200 for labor? does that include headwork? Por and polish, valve job, port matching, balancing the rank??? my machine work was 1200 but i had a whole lot done to my motor 862 for cams??? what cams are you running? I paid 520 for my buddy club cams head gasket looks ok price.... what pulleys are you getting? My crank pully I got for $80 a N1.. for valetrain I paid 430 for valves, springs, retainers, all supertech.. ferrea valve guides were 80 and head studs and rod bolts were 150 arp.... and 800 for forged pistons and rods... that is my prices i got for my build.. not sure if h series is more or what.. get at me if you need anything as far as missing i like to always build with head bolts, rod bolts, and main bolts...you are gonna need bearings and rings..uhmm... injectors, cm gears, fuel rail and regulator, water pump, timing belt, maganetic drain plug, header, intake manifold, throttle body, there are tos more that can be done.. all depending on your budget and goals __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3000GT Engine rebuild	catchme215	General Car Related Chat	19	07-29-2010 04:38 PM
Engine rebuild -WRX	SMOCAN	Subaru Talk	9	05-06-2009 07:29 PM
Rebuild OR New Engine???	SUB2.5RS	General Car Related Chat	15	12-02-2006 10:35 AM
Engine rebuild?	charliemopps24	Engine Performance	2	11-30-2006 03:06 AM

05-26-2007, 04:01 PM	#3
BCSpeed Tri-State Aficionado Join Date: Feb 2006 Location: Tullytown,PA Member #1414 My Ride: 91 integra iTrader: (0)	1200. is a bit steep for an engine build unless its a full build as stated.