06-24-2010, 10:15 PM | #1 |
Tri-State Aficionado
|
Dustin's 1991 240sx Hatch Build
When I bought the car, it had a built sr with je pistons, rods, hks 272 cams, worked head, fpbig28 turbo, etc. Suspenson was kyb adjustable shocks/struts with eibach springs. Anything in red hasn't been purchased yet Suspension/Footwork: Stance GR+ ISIS Tension Rods ISIS Traction Rods ISIS Toe Rods ISIS RUCA Rota Grids 18x9.5 +20 225/40/18 Nankang all around 5 lug Converted 20mm/25mm Bolt-on Spacers S14 Tie Rods Engine Stuff: ISIS FMIC ISIS Dual 12" E-Fans Power FC GT2871r Tune Body/Chassis/Odds&Ends: Type X Bumper Type X Side Skirts Welded Diff Dark Purple Metallic Paint Job New Stock Rear Bumper + Type X Valances ISIS Power Steering Line I know I'm leaving stuff out, but on to the pictures. Start of the 5lug 5lug done, stance coilovers on, isis tension rods up front. Harness ziptied up, type-x will be on soon. Will update as things come along. I need to put on my traction and toe rods in the back then the suspension is complete. Next project is to roll and pull the fenders to fit these wheels get an alignment at r/t |
06-24-2010, 10:17 PM | #2 | ||
TST Ruined My Life!
|
i saw this and thought about buying it when i was looking for another car. good luck with it.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Quote:
Quote:
|
||
06-24-2010, 10:54 PM | #3 | ||
Tri-State Post Whore
Join Date: May 2007
Location: Levittown,Pa
Member #4895
My Ride: 2014 WRB BRZ, 1992 SVX iTrader: (5)
|
Nice work good luck with it.
__________________
*formerly TekuDrifter18* Quote:
Quote:
|
||
07-01-2010, 12:49 PM | #5 |
Tri-State Aficionado
|
Still waiting on my spacers.
Bought the 20mm vented fenders off Vosko last night, thanks again dude! Will update tomorrow with rear suspension finished, need a paintjob asap |
07-01-2010, 09:55 PM | #7 |
Tri-State Addict
|
Looking good cant wait to see it finished!
__________________
2004 Civic Si - 301whp 250wtq @ 9.5psi PSI PROformance Tuned To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. / To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. / To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
07-17-2010, 10:20 PM | #8 |
Tri-State Aficionado
|
Suspension parts are all on, need to spend some time and adjust the rear alignment so I can make the drive up to r/t unless I get a trailer.
Need to cut out my battery box and get my front mount mounted, find a relay kit for my e-fans, pull my rears, and get my 25mm spacers on, a long with getting fenders, bumper, and skirts mounted fully Fender just resting on the car there, going to drill out and mount next week. And yeah, the front needs to go down about 2.5 inches. Also have a fuel leak back towards the pump I'm assuming, haven't had the chance to check it out yet and only leaks when it's running. Awesome. More updates next week |
07-18-2010, 10:36 PM | #9 | ||
Tri-State Post Whore
Join Date: May 2007
Location: Levittown,Pa
Member #4895
My Ride: 2014 WRB BRZ, 1992 SVX iTrader: (5)
|
Looking good. Did you do a full 5 lug or just the hubs?
__________________
*formerly TekuDrifter18* Quote:
Quote:
|
||
07-19-2010, 02:36 AM | #11 |
Tri-State Addict
|
nice dustin
car is lookin better
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
07-29-2010, 12:35 AM | #12 |
Tri-State Aficionado
|
Today I replaced the fuel filter and one of the soft lines with it.
Got rid of the side mount intercooler and got my isis fmic on, as you can see obviously. In the process of hacking up my bumper support so the intercooler can fit. Tomorrow I'm drilling out the holes for the fenders, cutting up the bumper support, putting a new drain plug on, and fixing my rear alignment so the car is driveable. I want a metal intake pipe for my turbo, and a new filter. |
07-29-2010, 12:47 AM | #13 |
Tri-State Training Wheels
|
doin good. whens the awd slammed dodge build thread comin up
__________________
'05 Altima 3.5 ~ BOSE ~ De-Badged ~ Blacked Out Emblem ~ DDHU ~ more to come... |
07-29-2010, 01:35 AM | #15 |
Tri-State Aficionado
|
Whenever the dude gives me a quote, and I manage to get that much money to blow haha
Thanks. It was actually supposed to be done by now, but I was supposed to be out $500 for a deductible on my truck, so I lost motivation to work on it the last two weeks and wasted some money. Then turned out I didn't have to pay it out of my pocket meaning I lost 2 weeks of work and money I wasted wouldve went to spare wheels and tires. Hopefully these thunderstorms hold off long enough tomorrow for me to finish what I need done. |
11-30-2010, 06:09 PM | #17 | ||
Tri-State Post Whore
Join Date: May 2008
Location: Willingboro
Member #7892
My Ride: 1996 240sx & 1989 240sx Coupe iTrader: (0)
|
What ever happened to this car?
Does it still exist? We need Dustin/Dustin Tandem in 2011. DO IT!
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Quote:
Quote:
|
||
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My 1989 EF hatch build thread. "Ninja Turtle Hatch" | Jrose152 | Member Journals | 18 | 02-10-2010 07:29 AM |
1991 240SX Build, momeymomeymomey momment of truth! | Nick Merrone | Member Journals | 491 | 07-06-2009 04:02 PM |