11-21-2006, 07:18 AM | #1 |
Tri-State Aficionado
|
Aem
AEM engine management / uego wideband controllers / fuel pressure regulators / etc contact me for pricing and availability. Serious inquries only please Aem Website |
11-21-2006, 07:19 AM | #2 |
Tri-State Aficionado
|
Aem Ems !
AEM's Plug & Play Engine Management System (EMS) will forever change the way you look at and perform fuel injection tuning! This user-programmable system plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows-based software (XP, 2000, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. User-defined templates are easily configurable and enable tuners to establish "quick keys" to any pertinent information during the tuning process.The AEM EMS's infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately deliver proper amounts of fuel and correct ignition timing for ANY boost level or operating condition. This SRT-4 EMS kit... Installs in Minutes Plug & Play Technology - No Extra Wiring Necessary Uses all the Factory Sensors Includes Weather-Proof Enclosure Includes Stock ECU Relocation Wire Harness Includes Stock ECU Relocation Mounting Hardware Includes OBD2 Port to Serial Cable Optional Internal UEGO Fuel Table Automapping SRT-4 Base Map Included Programmable Traction Control Ready On Board 512kb Datalogger 10 Cyl Sequential Fuel Injection 16 General Purpose Outputs 6 Definable Switch Inputs Boost Control (No Extra Hardware Needed) Soft Cut Rev Limiters 2 Step Launch Control Wet or Dry Nitrous Control Definable Knock Control Full Idle Control 4 EGT Inputs w/Fuel Control 16/32 Hybrid High-Speed Processor TST Forums price = $$$ too low to mention !!! |
11-21-2006, 07:20 AM | #3 |
Tri-State Aficionado
|
AEM true boost controller
**** contact me for pricing and availability ***
AEM?s TRU-BOOST Gauge-Type Controller is an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for set up, and it is fully functional right out of the box. There are no gimmicks or special software programs included. If you want more boost press the button on the right of the gauge face, and if you want less boost press the button on the left of the gauge face. It?s that simple, and IT WORKS! AEM?s TRU-BOOST Gauge-Type Controller includes everything you need, including an on-board 29 psig pressure sensor, built-in Overboost protection with two timed shutdown levels, a scramble boost setting and a low-side output for a warning light. AEM offers a 75 psia boost sensor for high boost applications (sold separately). AEM?s boost control solenoid (included) is the only one specifically manufactured for automotive boost applications, which means it won?t corrode and stick from exposure to rich fuel mixtures, it is pressure tested to 100 psi and includes -4 AN fittings to eliminate any chance of leaks. No external interface required for programming! Complete system includes harness, boost hose, on-board 29 psig pressure sensor (external 75 psia optional), boost solenoid, gauge display and all necessary fittings Quick connect technology eases the installation process Two user selectable boost settings with peak boost memory Scramble boost setting allows user to momentarily change boost levels User selectable Overboost alarm includes two timed shutdown levels at 10% and 20% Overboost User configurable gauge includes 24 scalable LEDs, and interchangeable bezel, pin guide and faceplate to customize look of display One (1) low-side output included for warning lights msrp = $345.45 Aem Power website |
11-21-2006, 07:21 AM | #4 |
Tri-State Aficionado
|
AEM Uego A/F Controller
**** Contact me for pricing and availability ****
A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-channel wideband UEGO controller and gauge display into one unit, uniting unsurpassed AFR accuracy and control with an easy-to-read interface. AEM?s Gauge-Type Wideband UEGO Controller features a digital LED display and sweeping LED ?needle? that changes colors as AFR changes from rich to lean. The unit?s 52mm (2-1/16?) gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere. Ideal AFR monitoring tool for EFI and carbureted applications, and engine dynamometers Does not oscillate AFR reading like narrow band sensors No laptop required for monitoring! Bosch sensor included Accurate to 0.1 AFR Reads in AFR or Lambda via a switch in back of gauge housing 24 Color-coded LED display lights provide immediate reference to engine?s air/fuel ratio (AFR) or Lambda ratio Integrated three-digit display reveals AFR or Lambda in real time User-programmable 0-5v analog output included for use with data loggers and virtually any engine management system Serial data stream included for output of AFR (RS 232) msrp = $349.41 AEM Power website |
12-17-2006, 06:23 AM | #8 |
Tri-State Aficionado
|
.. due to popular demand .... $275 ( continental 48 states ) by 1/1/2007 ...
$10 increase for shipping / paypal /etc Last edited by The Devils Z; 12-30-2006 at 09:09 AM. |
12-30-2006, 09:09 AM | #10 |
Tri-State Aficionado
|
AEM digital boost gauge ( not a boost controller )
AEM digital boost gauge ( not a boost controller ) ~ $185 shipped continental 48 states
AEM’s digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions. AEM’s digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge—it’s like having four gauge designs in one! Includes easy-to-install harness and sensor Complete stand alone gauge requires no additional sensors or programs to operate Ideal for both fuel injected and carbureted motors LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions Includes 0-5V analog output for routing to engine management system or data logger Easy to read faceplates/displays are designed to complement existing AEM gauge styles Included bezels and face plates allow you to personalize the look of your gauge |
03-19-2007, 07:21 PM | #13 |
Tri-State Training Wheels
|
can I order just the power harness for the AEM wideband? mines f'd up for some reason...
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
03-19-2007, 07:25 PM | #14 |
Tri-State Aficionado
|
|
03-19-2007, 07:55 PM | #15 |
Tri-State Training Wheels
|
I need the harness that plugs into the back of the UEGO gauge. The smaller plug is what I'm talking about....thats the power one has 5 wires in it I believe.
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
Bookmarks |
|
|