01-13-2006, 02:38 PM | #1 |
Tri-State Addict
|
Greddy, HKS, ACT... Check it out
Please note these are evo parts yes, however we do carry parts for any japanese car. So if you are interested in similiar products for your car and you are not an evo, please shoot us a pm and we will get you pricing. ACT street disc $525 shipped! ACT Heavy Duty Pressure Plates provide increased torque capacity, durability, and extended clutch life. What makes ACT Pressure Plates the highest standard in the industry? First, ACT manufacturing always begins with new units. Second, pressure is increased the right way. Altering the geometry alone is not enough. Instead, ACT engineers a stronger diaphragm. ACT diaphragms are heat-treated using an exclusive 3-stage process and the release bearing contact area is hardened to reduce wear. Third, ACT designs the pressure and release travel of the unit to be in the optimum working range. Every unit ACT produces is accurately balanced and tested. ACT Street Discs are designed for smooth engagement, quiet operation and improved durability using only the best organic, spring center designs. ACT Performance Organic Street Discs use special performance linings designed to withstand high heat and abuse. * Includes heavy duty pressure plate, performance organic street disc, release bearing & alignment tool * 38% increase in clamping force over OEM pressure plate * Torque capacity of up to 497 lb-ft Greddy Profec B: $300 shipped! The GReddy Profec B-spec. Spec II is one of the simplest, easy to use electronic boost controllers on the market today. Available in either Black or Silver cases (clear blue pictured here is not available anymore), the B uses a reliable twin-solenoid valve control motor. There are two presets labeled Lo. and Hi., as well as a Balance knob to alter the wastegate boost response. This unit also can be used with both integral/actuator or external/poppet style wastegates Good for twin and sequential turbo setups. Compatible with GReddy's Remote Switching System below. Greddy RS BOV- $225 shipped! Image coming shortly. Greddy Titanium exhaust: $889 shipped! Although GReddy is known for their famous cat-back street exhaust, GReddy got its start in racing exhausts. After numerous customer requests, they have decided to release a line of race inspired exhaust systems. Not satisfied with just offering another free-flowing, large diameter piping with minimal bends, GReddy has decided to offer the GReddy Racing Exhaust in full Titanium; that's an 80mm cat-back system that weighs as little as 10 lbs. Greddy T67 (25G) Turbo Kit: $3775 shipped! *actual picture shown* Wow thats rather large! If you like to drag race your EVO, this turbokit is for you!! GReddy T67 turbokit is designed for those of you who frequent drag strips. This Turbokit is capable of putting down 400+whp with a properly tuned engine management. The kit comes with GReddy/Trust T67 turbocharger, new precision crafted exhaust manifolds, GReddy/Trust poppet-style external wastegates, flanged exhaust downpipes, and all associated hardware for a complete and detailed installation. For those of you looking to make big power this is a great option. HKS RS Intake: $295 Shipped We are running this intake on our shop evo, and its amazing. If you do some searching you will see this is one of the best if not the best intake out there. HKS Racing Suction Kits are limited versions of Super Mega Flow intakes that come with polished aluminum piping and signature yellow SMF filter elements. These kit offer greater airflow and show quality looks from the less restrictive polished aluminum pipes. About 8-10whp can be realized after fine tuning. HKS Hiper Exhaust: Regular only: $545 shipped! Type: Cat-back (USDM) Piping Style: 75mm Stainless Mandrel Bent, Coated Tip Type: 120mm Straight Cut Resonator: One Silencer: No HKS Carbon TI: $775 shipped! Type: Cat-back (USDM) Piping Style: 75mm Stainless Mandrel Bent, Polished Tip Type: 120mm Straight Cut Resonator: One Silencer: No Greddy 24v FMIC: $800 shipped! we can also get the 24R, and the 24R-hg (special order), for those of you who are interested please PM us and we will give you pricing. GReddy's newest part for your Evo is this awesome front mount kit. Although designed for the Evo VII, this FMIC will is also direct replacement for EVO VIII as well. This intercooler kit is measuring 276mm x 600mm x 76mm, which is both taller and wider than the standard Evo VII/VIII core. Piping is included with each kit as well. VSPL - features matte intercooler and matte piping, can work with standard turbo or either of the GReddy turbo kits, and works with standard intake or GReddy Airinx. Includes rubber joints for intercooler piping. This setup is recommended when high boost modification is applied. Expect about 6-10+ WHP gain As you can see we do have good deals going on all these items. We do price match, so IF you find lower please pm us and we will work something out. Also if you are looking for other parts that are not on this list please don't be shy and PM us we have hundreds of parts so chances are if your looking for it... we have it! Steve GnV Motorsports |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rims, Drop, Lip kit, Check check check. | The Captain | Gallery | 20 | 10-06-2008 12:29 AM |
Greddy..Super deals from R/T Tuning . . P.S. ALf likes Greddy too | S.Milone | (Past Vendors) | 18 | 01-30-2008 07:18 PM |
Check it.. | Evo8kid | Off-Topic | 3 | 06-24-2006 10:16 PM |