CoolingMist Water Injection Specials!!!

[IMPORTIMAGE]

Coolingmist water injection kits now in stock!!!



Stage II retails for $499.95. Your price $WILL NOT BE DUPLICATED shipped
* Clog Nozzle Detector
* Brass Water Filter
* 2 Quart Tank
* Vari-Cool Coolingmist Controller
* Complete Kit!!!
* No Need To Specify Horsepower!
The Stage II controller kit is a fantastic value. Its exactly the same as stage I except it ships with a brass clog nozzle/water flow detector. It will blink when water/methanol flows and it will tell you if you have a clog. You recieve our high pressure pump, vari-cool tuning controller, a 2.0 quart tank and everything else you need. The controller has a starting point for boost, a maximum point for boost and a tuning knob. The tuning knob gives you 10 algorithms to choose from. For example, if you set the minimum knob at 1 and the max at 30 and have the tuning knob at 1 it will give you a linear feed from 1-30 psi. The higher you change the tuning knob the more agressive the curve. Because of this, you do not need to change injectors when you gain more HP. Our software suite allows you to change the variables in the controller so you can fine tune if you wish. Software requires windows 2000, NT, 2003, or XP +. The controller has a 0-5V input also, so if you prefer to inject the water based on the 0-5 instead of the boost, you can do that also. What else can this unit do? Lets say you want to run based on both 0-5V input and Boost...You can set the 0-5V as the primary input and the boost as secondary or you can set the boost as primary input and 0-5V as secondary. You must have the software configured to run that mode.


Stage III retails for $599.95. Your price $490 shipped
(THE STAGE III COMES WITH A 1 GALLON TANK AND FLOAT SWITCH)
* 12 Feet Of Stainless/Teflon Hose (more optional)
* Brass Water Filter
* Stainless Steel Re-Useable fittings
* Hose can be shortened with a Dremel Tool
* 1 Gallon Tank
* Low Fluid Light



The 150 psi deluxe kit + tank is $299.95, your price is $WILL NOT BE DUPLICATED shipped
* Methanol Safe
* 150 PSI Pump
* 15 Feet of Hose
* Boost Activated 1-25 PSI
* 90 Day Warranty
* Complete Kit
* Professionally Packaged
This is the Cooling Mist DELUXE 150 psi Methanol/Water Injection kit. It comes with everything you need. This comes with our 150 psi pump, brass water filter, 2.0 quart water tank , water tank taping kit and all the wiring, injectors and other things you need. This also ships with our outstanding brass checkvalve. This is a great deal. The boost switch is adjustable from 1-25 psi. Its a great kit at a great price. choose single nozzle or dual nozzle setup from the drop down box. If you have more than 500 HP or if you have twin carbs/throttlebodies we recommend the dual nozzle setup.

Options-
All kits come with a 2 quart tank. There is no pricing difference if someone wants a kit without a tank. If you would like to add a float switch with your order add $20

If you would like to upgrade from a 2 QUART tank to the 1 Gallon your cost is $20 to do so.
Upgrade to the 2.5 gallon tank for $40


Add a controller for $179

Quick check out right here-
http://www.importimageracing.com/index.php?cPath=414

Import Image Racing
www.ImportImageRacing.com
Visa/Mastercard-
239 437 6385
Paypal= Whtezmbej@aol.com
Money order address=
Import Image Racing
15460 Bellamar Circle #2722
Ft. Myers, FL 33908