Girls love a big wide....... - TriStateTuners.com :: Home of Tristate Auto Enthusiast

SlideWayzS13 · 01-20-2008, 01:44 PM

Wheel, I picked up a set of Racing Hart RS721's wheels dirt cheap for my 5 lug conversion on my coupe. 19x10.5 Rear 18x9 Front. Ill get the pics up in a little. ANyone think its gonna be toooo wide?? There getting stretched tires and pulled fenders and quarters.

dt98gsr · 01-20-2008, 02:11 PM

I can't wait to see them installed!

CarbonIS · 01-20-2008, 02:15 PM

that is ****ing bad-ASS. Nice!!!

pinkarrowsnow · 01-20-2008, 02:26 PM

Offsets will determine how they'll fit you may need some spacers on the front but plenty of 240's have crazy wide wheels on them so I think youll be good.

SMOCAN · 01-20-2008, 02:30 PM

Well the fronts should fit fine if they are around a +20 to +25 offset, any higher and they will rub your suspension, any lower and they will rub your fenders, with moderate stretch.

Offsets are important when using large sizes like these. Post up the offsets so i can get a better idea. Or just put them on and you'll figure out real quick if they are the right offsets or not.

I wanna see though!

JBWRX06 · 01-20-2008, 02:56 PM

those wheels are sick

SlideWayzS13 · 01-20-2008, 05:00 PM

Thanks guys I mean I am gonna do what I can to make them work, if not no big deal. I kinda think they are a +26 offset, not really good with the whole whats a good offset or any of it for that matter. Im hopein we get another warm week so I can get the 5 lug on and see these bad B!t(h's on.

DSMTJ · 01-20-2008, 07:11 PM

you can never go too wide... how big of tire are you going to use?

james_ls · 01-20-2008, 08:00 PM

Nice wheel.

I always seem to forget about Racing Hart stuff...

SlideWayzS13 · 01-20-2008, 10:39 PM

Quote:

Originally Posted by DSMTJ

you can never go too wide... how big of tire are you going to use?

i Think im gonna go with 295-40-19 in the rears

SMOCAN · 01-21-2008, 12:18 PM

Quote:

Originally Posted by SlideWayzS13

i Think im gonna go with 295-40-19 in the rears

Your without a doubt going to need large fender flares or overfenders....

Those things are gonna be huge... Its gonna look weird if you dont have a body kit.

SlideWayzS13 · 01-21-2008, 01:51 PM

Quote:

Originally Posted by SMOCAN

Your without a doubt going to need large fender flares or overfenders....

Those things are gonna be huge... Its gonna look weird if you dont have a body kit.

Yea i thought so jest a rear bumper if you know the car, it is already low enough to the ground side skirts would just get destroyed. But Ill prob end up getting side skirts as well.

S.Milone · 01-21-2008, 03:06 PM

Run 265 on the rear 235 in the front. That will give you a bit of a stretch. 295 is alot of tire and won't stretch much on a 10.5. The 265 will help you fit them as well. We can help you out with tires if you like.

DSMTJ · 01-21-2008, 04:09 PM

a 295 will not stretch on a 10.5 inch rim. and that is a hell of alot of tire for a 240sx.

kunt_masha · 01-21-2008, 04:16 PM

i thought you were sellin the coupe?

whos rollin the fenders

SMOCAN · 01-21-2008, 04:20 PM

Quote:

Originally Posted by SlitZ

i thought you were sellin the coupe?

whos rollin the fenders

Hes gonna need alot more than just a roll....

kunt_masha · 01-21-2008, 04:22 PM

Quote:

Originally Posted by SMOCAN

Hes gonna need alot more than just a roll....

ha yea i meant stretch, i wanna see some progress pics on it

Wiisass · 01-21-2008, 10:49 PM

10.5+26 will fit under the rear fenders with a stretched tire, a small pull and some camber.

SlideWayzS13 · 01-21-2008, 11:16 PM

Not to sure who is gonna pull the quarters n roll the fenders I am open to advice on good shops. And also 265 will work and I prob do need a shop to stretch them on for me. PM with some prices thanks guys!

SMOCAN · 01-22-2008, 12:45 AM

I went to sears, mounted and balanced for 15 bucks each... its not really a big deal but some places just won't put small tires on large wheels... My buddy went to the sears near him and they wouldn't do it.

01-20-2008, 01:44 PM	#1
SlideWayzS13 Tri-State Addict Join Date: Nov 2006 Location: Under Ur Bed Member #2935 My Ride: 89 240sx BlkTop Sr iTrader: (2)	Girls love a big wide....... Wheel, I picked up a set of Racing Hart RS721's wheels dirt cheap for my 5 lug conversion on my coupe. 19x10.5 Rear 18x9 Front. Ill get the pics up in a little. ANyone think its gonna be toooo wide?? There getting stretched tires and pulled fenders and quarters. __________________ Eagle CP ACL ARP Full-Race Garret GReDDy Manley Crower NismO Haltech ///Works Last edited by SlideWayzS13; 01-27-2008 at 10:06 PM.

01-20-2008, 02:11 PM	#2
dt98gsr Tri-State Post Whore Join Date: Nov 2006 Location: Heart of Jersey Member #2949 My Ride: '98 Integra GSR (Gone) '07 Si Coupe (Daily) '08 s2000 (New Project!) iTrader: (1)	I can't wait to see them installed! __________________ Dave@Canibeat.com '07 Si Coupe & '08 s2000 To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-20-2008, 02:30 PM	#5
SMOCAN Tri-State Aficionado Join Date: Jul 2007 Location: PA Member #5412 My Ride: Carbon Black E36, S13 in pieces iTrader: (1)	Well the fronts should fit fine if they are around a +20 to +25 offset, any higher and they will rub your suspension, any lower and they will rub your fenders, with moderate stretch. Offsets are important when using large sizes like these. Post up the offsets so i can get a better idea. Or just put them on and you'll figure out real quick if they are the right offsets or not. I wanna see though! __________________ C55 CARBON BLACK E36 S13 Project

01-20-2008, 02:56 PM	#6
JBWRX06 Tri-State Addict Join Date: Jan 2007 Location: Aston, PA Member #3377 My Ride: 06' Wrx Stage 2 iTrader: (2)	those wheels are sick __________________ Johnny B

01-20-2008, 05:00 PM	#7
SlideWayzS13 Tri-State Addict Join Date: Nov 2006 Location: Under Ur Bed Member #2935 My Ride: 89 240sx BlkTop Sr iTrader: (2)	Thanks guys I mean I am gonna do what I can to make them work, if not no big deal. I kinda think they are a +26 offset, not really good with the whole whats a good offset or any of it for that matter. Im hopein we get another warm week so I can get the 5 lug on and see these bad B!t(h's on. __________________ Eagle CP ACL ARP Full-Race Garret GReDDy Manley Crower NismO Haltech ///Works

01-20-2008, 02:26 PM	#4
pinkarrowsnow Tri-State Addict Join Date: Aug 2007 Location: NJ Member #5596 My Ride: 1991 240sx iTrader: (0)	Offsets will determine how they'll fit you may need some spacers on the front but plenty of 240's have crazy wide wheels on them so I think youll be good.

01-20-2008, 07:11 PM	#8
DSMTJ Tri-State Addict Join Date: Feb 2006 Location: Aston, PA Member #1442 My Ride: Callaway Sledgehammer iTrader: (0)	you can never go too wide... how big of tire are you going to use? __________________ Tristian C5 Z06, weekend driver 2003 Jetta GLI VR6/6 Speed, daily beater

01-20-2008, 08:00 PM	#9
james_ls TST Ruined My Life! Join Date: Mar 2006 Location: Warrington Member #1614 My Ride: 1998 Acura Integra LS//VTEC iTrader: (0)	Nice wheel. I always seem to forget about Racing Hart stuff... __________________ *Heller Dope* - When the ** is doper than Hellen Keller; it's Heller Dope To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. BUY MY STUFF!** To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-21-2008, 03:06 PM	#13
S.Milone Tri-State Post Whore Join Date: Dec 2006 Location: PA Member #3073 My Ride: 240sx hatch iTrader: (0)	Run 265 on the rear 235 in the front. That will give you a bit of a stretch. 295 is alot of tire and won't stretch much on a 10.5. The 265 will help you fit them as well. We can help you out with tires if you like. __________________ East Coast Drift Club's - Come and see To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Great Parts To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-21-2008, 04:09 PM	#14
DSMTJ Tri-State Addict Join Date: Feb 2006 Location: Aston, PA Member #1442 My Ride: Callaway Sledgehammer iTrader: (0)	a 295 will not stretch on a 10.5 inch rim. and that is a hell of alot of tire for a 240sx. __________________ Tristian C5 Z06, weekend driver 2003 Jetta GLI VR6/6 Speed, daily beater

01-21-2008, 04:16 PM	#15
kunt_masha Tri-State Post Whore Join Date: Jul 2005 Location: Coatesville & Manayunk, PA Member #671 My Ride: wide low dumb e30, heavy slow 350z iTrader: (0)	i thought you were sellin the coupe? whos rollin the fenders __________________ Formerly SlitZ

01-21-2008, 10:49 PM	#18
Wiisass Tri-State Addict Join Date: Aug 2005 Location: Yardley Member #744 iTrader: (0)	10.5+26 will fit under the rear fenders with a stretched tire, a small pull and some camber. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Just put the TIP In. To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

01-21-2008, 11:16 PM	#19
SlideWayzS13 Tri-State Addict Join Date: Nov 2006 Location: Under Ur Bed Member #2935 My Ride: 89 240sx BlkTop Sr iTrader: (2)	Not to sure who is gonna pull the quarters n roll the fenders I am open to advice on good shops. And also 265 will work and I prob do need a shop to stretch them on for me. PM with some prices thanks guys! __________________ Eagle CP ACL ARP Full-Race Garret GReDDy Manley Crower NismO Haltech ///Works

01-22-2008, 12:45 AM	#20
SMOCAN Tri-State Aficionado Join Date: Jul 2007 Location: PA Member #5412 My Ride: Carbon Black E36, S13 in pieces iTrader: (1)	I went to sears, mounted and balanced for 15 bucks each... its not really a big deal but some places just won't put small tires on large wheels... My buddy went to the sears near him and they wouldn't do it. __________________ C55 CARBON BLACK E36 S13 Project

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I love dancing and I love Madonna music.	jc8889	Off-Topic	0	03-06-2007 02:12 AM
if all the hot girls work at hooters. where do the girls with one leg work	92talonTSI	Off-Topic	13	01-30-2006 11:39 AM
no love for the big girls	auk113	Off-Topic	7	01-09-2006 07:53 PM