Back From Atco - Page 2 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

ITSTOCK · 10-19-2005, 11:15 PM

spray it till it blows!

99SL2_Modder · 10-20-2005, 12:03 AM

Quote:

Originally Posted by Intercooled T

get an 8.5" rear w/ some 3.42 gears and wider tires

Dude, he's at something liek 45* advance at 3500rpm.

Intercooled T · 10-20-2005, 11:15 AM

so? ditch that 7.5" tim!

swap over the turbo-t parts, your mom will never know

SilverTurboRidin · 10-20-2005, 12:59 PM

Quote:

Originally Posted by Intercooled T

so? ditch that 7.5" tim!

swap over the turbo-t parts, your mom will never know

IM GAME...JUST FORGET TO TURN ON THE ALARM ONE NIGHT LOL

Intercooled T · 10-20-2005, 02:41 PM

haha, wouldn't doubt the turbo-t is prolly garaged anyways...tim should spray the block till it breaks, and put a fuel injected setup in that car, like a ls1 motor from this place in bristol... http://cgi.ebay.com/00-Trans-Am-Cama...QQcmdZViewItem

1988 Olds · 10-20-2005, 04:53 PM

First of all the total timing is only like 36 degrees. It's 44ish with the vacumm advance which is about that is should be. I know it's not running 100% with the timing though. I don't know of many 11 second N/A cars (daily driven). I just weight it today and it's 3600lbs so with me thats 3760lbs. To run 13.65 @ 100mph is about 300hp to the wheels or 360-370hp at the crank which isn't bad for a daily driven car. Not to metion it would be .2-.3 with suspension and tires.

If you and Doug really wana mess around with my car for FREE, then we can probably take a look at it. I still don't think I'm going to see 12s but who knows. I've never seen Dougs Nova and your still in the 17s while my dad has been doing this for 25 years and has a 730hp Small Block Ford running 8.20s. No offense to you guys at all, just saying if my dad messes up I ain't going to get yelled at as compared to you guys messing with it.

I'm not stealing parts of my mom's car and Fuel Injection I don't see being an idea since there is nothing out there for Oldsmobiles yet. Plus the cost would be crazy. Chances are I'll just hopefully get that suspension and stuff done whenever I'm not paying for school and stuff lol.

SilverTurboRidin · 10-20-2005, 04:55 PM

Tim how different is a olds 350 from a chevy 350??? just outta curiousity.

1988 Olds · 10-20-2005, 05:02 PM

Um pretty much none of the parts are the same. Some people will have Chevy parts custom made to fit that's about it. You could probably use my carburator, that's about it LOL.

Intercooled T · 10-20-2005, 06:09 PM

it's notta bad block, just needs more tuning. good times man nonetheless

ITSTOCK · 10-20-2005, 06:20 PM

Stop being a woman and

Quote:

spray it till it blows!

Quote:

Originally Posted by 1988 Olds

First of all the total timing is only like 36 degrees. It's 44ish with the vacumm advance which is about that is should be. I know it's not running 100% with the timing though. I don't know of many 11 second N/A cars (daily driven). I just weight it today and it's 3600lbs so with me thats 3760lbs. To run 13.65 @ 100mph is about 300hp to the wheels or 360-370hp at the crank which isn't bad for a daily driven car. Not to metion it would be .2-.3 with suspension and tires.

If you and Doug really wana mess around with my car for FREE, then we can probably take a look at it. I still don't think I'm going to see 12s but who knows. I've never seen Dougs Nova and your still in the 17s while my dad has been doing this for 25 years and has a 730hp Small Block Ford running 8.20s. No offense to you guys at all, just saying if my dad messes up I ain't going to get yelled at as compared to you guys messing with it.

I'm not stealing parts of my mom's car and Fuel Injection I don't see being an idea since there is nothing out there for Oldsmobiles yet. Plus the cost would be crazy. Chances are I'll just hopefully get that suspension and stuff done whenever I'm not paying for school and stuff lol.

99SL2_Modder · 10-20-2005, 07:20 PM

Quote:

Originally Posted by 1988 Olds

First of all the total timing is only like 36 degrees. It's 44ish with the vacumm advance which is about that is should be. I know it's not running 100% with the timing though. I don't know of many 11 second N/A cars (daily driven). I just weight it today and it's 3600lbs so with me thats 3760lbs. To run 13.65 @ 100mph is about 300hp to the wheels or 360-370hp at the crank which isn't bad for a daily driven car. Not to metion it would be .2-.3 with suspension and tires.

If you and Doug really wana mess around with my car for FREE, then we can probably take a look at it. I still don't think I'm going to see 12s but who knows. I've never seen Dougs Nova and your still in the 17s while my dad has been doing this for 25 years and has a 730hp Small Block Ford running 8.20s. No offense to you guys at all, just saying if my dad messes up I ain't going to get yelled at as compared to you guys messing with it.

I'm not stealing parts of my mom's car and Fuel Injection I don't see being an idea since there is nothing out there for Oldsmobiles yet. Plus the cost would be crazy. Chances are I'll just hopefully get that suspension and stuff done whenever I'm not paying for school and stuff lol.

That math is what many call "bench racing" or "rice math". It doesn't turn up with the true results.

Doug wants to see that car down where it should be. I have no doubt he'll play with it for free, AND show you a few tricks for it.

Your dad may have an 8 second racecar, but tuning a race engine and tuning a street engine are two totally different things. I'm not saying that your dad doesn't know what he's doing, I'm saying that every engine is different, so what works on one engine is probably not going to put the same out.

Also, that 240hp was made in 2nd gear, right? Then moving it to your 1:1 3rd will NOT yeild a 60whp increase. It just doesn't work like that.

blkbomber01 · 10-20-2005, 07:32 PM

yeah man i have no problem with tuning it for you.... you just have to let me know when you want to do it. worst case you could leave it with me and come after work or whatever to grab it

99SL2_Modder · 10-20-2005, 07:43 PM

Quote:

Originally Posted by blkbomber01

yeah man i have no problem with tuning it for you.... you just have to let me know when you want to do it. worst case you could leave it with me and come after work or whatever to grab it

Haha! trade cars for a day and I'll bring it in!

I start school on the 25th though.

blkbomber01 · 10-20-2005, 07:45 PM

Quote:

Originally Posted by 99SL2_Modder

Haha! trade cars for a day and I'll bring it in!

I start school on the 25th though.

hey... its not a saturn, haha

1988 Olds · 10-20-2005, 11:45 PM

Thanks Doug, I wana be there when ya guys are playing with it to see what's going on. I know you can't just add 60hp Clint but look at a few calculators. 240hp at the wheels is not moving a 3760lb mass to 101mph in 13.65.

SexyDSM95 · 10-24-2005, 12:48 PM

Quote:

Originally Posted by TehWagon

heyyyy let's all jump on the 'i got into the 13s before ash' bandwagon!!!!

haha- j/p - congrats!

P.S.-BTW-oh noeezzzz! I did

TehWagon · 10-24-2005, 01:16 PM

that's just great. eeeeverybody laugh at the old lady...

SexyDSM95 · 10-24-2005, 01:28 PM

Quote:

Originally Posted by TehWagon

that's just great. eeeeverybody laugh at the old lady...

you mean the chick that drives like an old lady in her old lady car J/K

I <3 TehWagon (the car)

sleeperstyle · 10-24-2005, 04:48 PM

Quote:

Originally Posted by ITSTOCK

Stop being a woman and spray it till it blows

im gonna have to agree.

also that 7.5 rear is fine with an auto. people (ahem) pull 1.6 60fts on them no problem. they do go sometimes it can be a gamble but with an auto you can get them WELL into the 11's. buy a rear end girdle and stud kit and they usually hold. in a stick car it is a different story however.

1988 Olds · 10-24-2005, 11:58 PM

I like your new sig and yeah I have to do some reseach about what people are doing. I'd just rather do it right they first time then waste time beefing up a weak rear.

10-20-2005, 11:15 AM	#23
Intercooled T Tri-State Post Whore Join Date: Mar 2005 Location: Fairless Hills, PA Member #207 My Ride: 2003 Toyota Rav4 iTrader: (0)	so? ditch that 7.5" tim! swap over the turbo-t parts, your mom will never know __________________ 2003 Toyota Rav4, 2.0L/Auto/AWD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 2013 Nissan Juke, 1.6T/Auto/FWD (wife's car lol To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. )

10-20-2005, 02:41 PM	#25
Intercooled T Tri-State Post Whore Join Date: Mar 2005 Location: Fairless Hills, PA Member #207 My Ride: 2003 Toyota Rav4 iTrader: (0)	haha, wouldn't doubt the turbo-t is prolly garaged anyways...tim should spray the block till it breaks, and put a fuel injected setup in that car, like a ls1 motor from this place in bristol... http://cgi.ebay.com/00-Trans-Am-Cama...QQcmdZViewItem __________________ 2003 Toyota Rav4, 2.0L/Auto/AWD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 2013 Nissan Juke, 1.6T/Auto/FWD (wife's car lol To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. )

10-20-2005, 04:53 PM	#26
1988 Olds Tri-State Post Whore Join Date: Mar 2005 Location: Levittown, PA Member #201 My Ride: 2012 Chevy Cruze iTrader: (0)	First of all the total timing is only like 36 degrees. It's 44ish with the vacumm advance which is about that is should be. I know it's not running 100% with the timing though. I don't know of many 11 second N/A cars (daily driven). I just weight it today and it's 3600lbs so with me thats 3760lbs. To run 13.65 @ 100mph is about 300hp to the wheels or 360-370hp at the crank which isn't bad for a daily driven car. Not to metion it would be .2-.3 with suspension and tires. If you and Doug really wana mess around with my car for FREE, then we can probably take a look at it. I still don't think I'm going to see 12s but who knows. I've never seen Dougs Nova and your still in the 17s while my dad has been doing this for 25 years and has a 730hp Small Block Ford running 8.20s. No offense to you guys at all, just saying if my dad messes up I ain't going to get yelled at as compared to you guys messing with it. I'm not stealing parts of my mom's car and Fuel Injection I don't see being an idea since there is nothing out there for Oldsmobiles yet. Plus the cost would be crazy. Chances are I'll just hopefully get that suspension and stuff done whenever I'm not paying for school and stuff lol. __________________ 1988 Oldsmobile Cutlass Surpeme Classic To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dynoed at 237hp and 292lbs at the rear wheels. Hmm ran 13.52 @ 103.42 11/10/06 1994 Hunter Green Acura Integra DB7, Stock

10-20-2005, 04:55 PM	#27
SilverTurboRidin Tri-State Post Whore Join Date: Feb 2005 Location: L-town PA Member #197 iTrader: (0)	Tim how different is a olds 350 from a chevy 350??? just outta curiousity. __________________ Uhh used to be my dog you was in my left titty Scream RYDE OR DIE I thought you would die wit me Found out you a bitch you can't even ryde wit me Now it's a war you ain't on the side wit me To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

10-20-2005, 05:02 PM	#28
1988 Olds Tri-State Post Whore Join Date: Mar 2005 Location: Levittown, PA Member #201 My Ride: 2012 Chevy Cruze iTrader: (0)	Um pretty much none of the parts are the same. Some people will have Chevy parts custom made to fit that's about it. You could probably use my carburator, that's about it LOL. __________________ 1988 Oldsmobile Cutlass Surpeme Classic To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dynoed at 237hp and 292lbs at the rear wheels. Hmm ran 13.52 @ 103.42 11/10/06 1994 Hunter Green Acura Integra DB7, Stock

10-19-2005, 11:15 PM	#21
ITSTOCK Tri-State Post Whore Join Date: Sep 2005 Member #844 iTrader: (0)	spray it till it blows!

10-20-2005, 06:09 PM	#29
Intercooled T Tri-State Post Whore Join Date: Mar 2005 Location: Fairless Hills, PA Member #207 My Ride: 2003 Toyota Rav4 iTrader: (0)	it's notta bad block, just needs more tuning. good times man nonetheless __________________ 2003 Toyota Rav4, 2.0L/Auto/AWD To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 2013 Nissan Juke, 1.6T/Auto/FWD (wife's car lol To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. )

10-20-2005, 07:32 PM	#32
blkbomber01 Tri-State Aficionado Join Date: Sep 2005 Location: Levittown, PA Member #885 My Ride: 2001 Mitsubishi Eclipse Spyder GS iTrader: (0)	yeah man i have no problem with tuning it for you.... you just have to let me know when you want to do it. worst case you could leave it with me and come after work or whatever to grab it

10-20-2005, 11:45 PM	#35
1988 Olds Tri-State Post Whore Join Date: Mar 2005 Location: Levittown, PA Member #201 My Ride: 2012 Chevy Cruze iTrader: (0)	Thanks Doug, I wana be there when ya guys are playing with it to see what's going on. I know you can't just add 60hp Clint but look at a few calculators. 240hp at the wheels is not moving a 3760lb mass to 101mph in 13.65. __________________ 1988 Oldsmobile Cutlass Surpeme Classic To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dynoed at 237hp and 292lbs at the rear wheels. Hmm ran 13.52 @ 103.42 11/10/06 1994 Hunter Green Acura Integra DB7, Stock

10-24-2005, 11:58 PM	#40
1988 Olds Tri-State Post Whore Join Date: Mar 2005 Location: Levittown, PA Member #201 My Ride: 2012 Chevy Cruze iTrader: (0)	I like your new sig and yeah I have to do some reseach about what people are doing. I'd just rather do it right they first time then waste time beefing up a weak rear. __________________ 1988 Oldsmobile Cutlass Surpeme Classic To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Dynoed at 237hp and 292lbs at the rear wheels. Hmm ran 13.52 @ 103.42 11/10/06 1994 Hunter Green Acura Integra DB7, Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm back! Car back up and running!	TheBlueP5	General Car Related Chat	1	01-18-2010 10:14 PM
DSM: 16G Vs. SCM5031E back to back	Shoolig	Gallery	4	04-15-2009 11:48 PM
atco 11-13	alwaysinboost	Drag Racing	47	11-14-2007 12:51 PM
atco 3/2	boostinsidewayz	Upcoming Events	28	03-02-2007 06:35 PM
Atco	97AltimaGXE	Drag Racing	24	04-09-2006 07:25 PM