09-16-2008, 08:35 AM | #1 |
Vendor
|
Bonehead Performance Garage Sale
Brand New SBR Bastard 20G. Ported in and out ($120 value). Flapper welded for use of external wastegate on the manifold TD05H housing This turbo uses a 20g comp wheel stuffed inside a 16g compressor cover. It is a direct bolt on for all 5 speed 1g cars and is an easy install on any 2g with our install kit. No one has to know your little secret with the SBR Bastard 20g.- $800 Barely used Fuel Injector Clinic 650cc fuel injectors- $200 (used for startup then changed set up and went with 1000cc injectors instead. Great condition ACT Streetlite Flywheel 600155 for 1G DSM FWD- 6 BOLT ONLY- This flywheel was never run but it was bolted to the crank for a clearance inspection. Basically brand new. Just has surface marks where the bolts were tightened. $200 OBO Brand New Fuel Injector Clinic DSM-2G 6AN Fuel Pressure Regulator Installation Kit Fuel Regulator Kit: DSM 2G -6AN Fuel Rail Adaptor with Aeromotive 13105 Fuel Pressure Regulator, Liquid Filled Carbon Fiber Face Fuel Gauge and complete installation kit. - This kit includes all fittings from the fuel rail outlet to the regulator outlet. Comes with black hose. $245 Brand New revised lifters for the 4g63- $99 shipped in the US Brand New Apexi Turbo Timers (silver) $85 shipped in the US. 2G DSM factory cam gears (pair) $10 2G DSM J-pipe for 16G turbo- $40 (will clean up and powder coat any single color of your choice for an extra $15) 2G throttle body elbow- $50 (includes having it powder coated any single color you want) 2G Talon black wing- $20 (prefer to pick up because its large to ship) Brand pair of New McQuay-Norris inner tie rod ends that were for going in a 97 Eclipse GSX- $60 for both Brand new AEM UEGO black gauge face with silver ring (gauge face and ring only...not the gauge)- $5 -6AN factory fuel rail feed fitting- $10 (1 only) Brand New Autometer Phantom 52mm 150 PSI Mechanical Oil Pressure Gauge- $40 2G DSM lower steering column cover (black plastic)- $10 2G DSM upper steering column cover (black plastic)- $10 2G DSM black plastic gauges surround piece- $15 2G DSM black leather shift boot- $10 2G DSM horn- $10 2G DSM gray seat mounting bolt cover clips- $8 Brand new Dejon Tool Compressor outlet elbow (powder coated gloss black) Increase restricted area 37% over stock. Fits 14b (stock 1g) & 16g Compressors. INCLUDES: 1. 1.75"OD mandrel bent elbow 2. Gasket and Porting template 3. (2) Stainless steel socket head cap screws. DOES NOT COME WITH AIR NIPPLE $35 Factory 2G DSM AWD Front sway bar- $40 Brand New Suspension Techniques 2G DSM AWD rear sway bar (will not clear 3" exhaust)- $100 Brand new 2G DSM clear bumper lenses (about 20 pairs)- $15 each pair. Brand New AEM UEGO gauges- $259.66 shipped for free in the US. Cometic Complete Engine gasket set for 1G DSM- $190 shipped free in the US. For a description please see- Cometic Complete Engine Gasket Kit- DSM: BoneHead Performance Brand New OEM Mitsubishi EVO III exhaust manifold- $204 Brand New 1G DSM FWD Three Speed Scatter Shield- $150 shipped free in the US. Brand New Megan Racing polished rear lower strut bar for 2G DSM AWD- $20 Brand New Vibrant Performance Stainless Steel V-Band Flange Assembly for 3" O.D. Tubing - V-Band Flange Assemblies are a popular and effective alternative to traditional flanged or slip fit tube connections. They work very well in operating conditions involving stress, vibration and extreme temperature fluctuations. - The V-band clamp design allows for a gasket free seal and the quick release feature of these clamps makes swapping parts at the track quick and easy. - Vibrant Performance V-band flange assemblies feature a unique "Male/Female" design to ensure proper alignment of the flanges inside the clamp. - each assembly consists of two (2) V-band flanges and one (1) Quick Release V-band clamp. $60 Vibrant Quick Release Stainless Steel T-Bolt Clamps (comes in pack of 2) 2791- $10- Clamp Range: 2.06"-2.37" 2792- $10- Clamp Range: 2.37"-2.68" 2793- $10- Clamp Range: 2.66"-2.97" 2794- $10- Clamp Range: 2.90"-3.21" Brand New OEM Mitsubishi wheel stud- MB911495- $3 Brand new OEM Mitsubishi Timing Belt Tensioner- MD308587- $80 Fits 05/01/95 to 08/02/95 We have about 20 cracked 4g63 valve covers laying around. We use most of them for samples for powder coating but still have many here. $15 per cover Good to paint or powder coat and hang on your shop wall or bedroom wall or could possibly repair it for a quick fix. Please email, PM or call us if you are interested in anything. If you need to see a picture please let us know. Thanks Bonehead Performance Inc 1836 Stout Dr Unit # 18 Warminster, PA 18974 215-674-8206 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bonehead Performance Review | WCM3 | Parts and Vendor Reviews | 1 | 04-26-2009 10:05 PM |
+1 for Bonehead Performance | CleanNeon98 | Parts and Vendor Reviews | 0 | 10-06-2008 01:12 AM |
Bonehead Performance new web site | boneheadperformance | Bonehead Performance | 0 | 08-19-2008 04:13 PM |
Bonehead Performance | DropTopChevy | Spotted! | 0 | 12-23-2005 06:34 PM |
Bonehead Performance: Job well done | 99SL2_Modder | General Car Related Chat | 3 | 09-15-2005 06:52 PM |