because this section needs luv too... - Page 4 - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Slasher · 02-17-2013, 04:58 PM

new Heico shift knob:

Slasher · 03-08-2013, 03:41 PM

swapped in some more silicone tubing...

Frostedv40 · 03-11-2013, 12:09 AM

Thought I might post a few updated pics in this thread instead of starting a new one. How my v40 looked when I bought it:

New wheels and repainted the grille:

Also replaced the front drivers door speakers and replaced some dash pieces that were covered with an old, chipped wood grain sticker kit with the OEM Volvo wood grain kit.

Have to replace the MAP sensor and get new coilovers for the rear because it sags way too much went it really shouldn't, also is making the front way too high. Got a new headunit, just waiting for the wiring harness to put it all together.

Slasher · 03-11-2013, 02:27 PM

Looks good Frosted! i recognize that car from the Chili's meet. love the urple. new wheels look good. good call on new overs for the rears as you have some serious reverse-rake going on currently.
looking forward to seeing the progression.

Frostedv40 · 03-11-2013, 05:15 PM

Thanks man! Yup, that meet wasn't even a week after I had bought the car, planning on getting a bit of work done before the next one in April. Are you planning on going to that as well?

Slasher · 03-16-2013, 09:42 PM

i hope to make it out for that.
bent a rim this week on PA pothole. grrrrrrrrrrr

2g Talon · 03-17-2013, 12:10 PM

That sucks.. winter beater ftw!

Sent from my SGH-T999 using Tapatalk 2

Frostedv40 · 03-17-2013, 01:35 PM

Ouch, that sucks big time.

Frostedv40 · 03-20-2013, 09:35 AM

Put in the new headunit. I'm sure some of you will probably think an aftermarket screen/dvd player looks tacky but it was a hand-me-down from a friend and free parts are free parts, sounds way better than stock.
Map sensor should come by Friday and then it's time to look for new springs. Would ideally like to get new coils all around so I can lower the whole car but right now my main concern is just fixing that rear.

lk250f · 03-31-2013, 05:36 PM

Very nice to see some other volvo owners here. I have a 97 850 GLT with 93K. For those of you who dont know, that is the LPT model. I have a ton of parts waiting to go on, most of which that will this week. I have a genuine volvo PCV kit, silicone IC hoses, Snabb inlet pipe, NA throttle body with 960 throttle plate and a 15g turbo i rebuilt to replace the smaller 15g and a 3" OBX downpipe I just bought. The car should be running only about 6psi as is. Once all the parts go on and an exhaust is welded onto the downpipe and I get 315cc injectors. I am going to get a flash tune from ARD lastly. This will up the boost to about 14-15psi. Should make a fun car, the 2.4 LPT is more torquey than the 2.3 HPT engine which is good. Then off to cosmetic parts.... I will post some more pics once I get some more work done! Thanks!

Frostedv40 · 04-02-2013, 04:22 PM

Quote:

Originally Posted by lk250f

Very nice to see some other volvo owners here. I have a 97 850 GLT with 93K. For those of you who dont know, that is the LPT model. I have a ton of parts waiting to go on, most of which that will this week. I have a genuine volvo PCV kit, silicone IC hoses, Snabb inlet pipe, NA throttle body with 960 throttle plate and a 15g turbo i rebuilt to replace the smaller 15g and a 3" OBX downpipe I just bought. The car should be running only about 6psi as is. Once all the parts go on and an exhaust is welded onto the downpipe and I get 315cc injectors. I am going to get a flash tune from ARD lastly. This will up the boost to about 14-15psi. Should make a fun car, the 2.4 LPT is more torquey than the 2.3 HPT engine which is good. Then off to cosmetic parts.... I will post some more pics once I get some more work done! Thanks!

That is one clean looking 850. Really like it!

Spent my easter weekend swapping out the automatic shift knob for the wood grain one.

Before:

After roughly an hour of fighting with the center console:

And roughly 3 hours after the project started:

With the majority of the interior swapped for the wood trim options it finally feels less cheap inside.

2g Talon · 04-06-2013, 01:32 PM

Looks nice man. Dont they always make the center console the biggest pain in the ass to get apart? Lol

Sent from my SGH-T999 using Tapatalk 2

Frostedv40 · 04-06-2013, 06:37 PM

Quote:

Originally Posted by 2g Talon

Looks nice man. Dont they always make the center console the biggest pain in the ass to get apart? Lol

Sent from my SGH-T999 using Tapatalk 2

I think they figure that no one in the right mind would need to remove the center console unless there was a problem so big that the car would have to be taken to a shop/dealership.

I haven't been in the right mind for a while though...

prienzo · 04-08-2013, 07:25 PM

Quote:

Originally Posted by lk250f

Very nice to see some other volvo owners here. I have a 97 850 GLT with 93K. For those of you who dont know, that is the LPT model. I have a ton of parts waiting to go on, most of which that will this week. I have a genuine volvo PCV kit, silicone IC hoses, Snabb inlet pipe, NA throttle body with 960 throttle plate and a 15g turbo i rebuilt to replace the smaller 15g and a 3" OBX downpipe I just bought. The car should be running only about 6psi as is. Once all the parts go on and an exhaust is welded onto the downpipe and I get 315cc injectors. I am going to get a flash tune from ARD lastly. This will up the boost to about 14-15psi. Should make a fun car, the 2.4 LPT is more torquey than the 2.3 HPT engine which is good. Then off to cosmetic parts.... I will post some more pics once I get some more work done! Thanks!

Nice!

If you're interested, I have a set of 16" 5 spokes with summer tires I would be willing to sell for quite cheap.

vol · 05-05-2013, 06:43 PM

Hi vol is my name..joined up the other day
I drive a 854R 1996..Auto & live in Dublin Ireland no much happening over here
when it comes to modding Volvo's..Will get some pics up soon as I have 3 Posts..

Cheers Vol.

vol · 05-05-2013, 07:05 PM

Pics as promised..just click on the link below

http://s1228.photobucket.com/albums/ee448/vol07/ Car updates, End of April 2013..

Slasher · 05-06-2013, 03:06 PM

looks good vol. my HQ is in Belfast area so i got over to your side of the pond every so often.

vol · 05-07-2013, 09:15 AM

Quote:

Originally Posted by Slasher

looks good vol. my HQ is in Belfast area so i got over to your side of the pond every so often.

Hiya Slasher, thanks for the comps m8..your Ride is a real head turner..some gr8 Mods done & love all the Heico Parts..next time you get over this side of the Pond
sure just let me know & we can hook up..maybe show you all the sights in Dublin as we cruse around in my 854R

Cheers James/Vol.

Slasher · 05-09-2013, 03:06 PM

thanks vol. will do!
added 15mm spacers to the rear:

front shot:

jmhockey87 · 05-13-2013, 03:57 PM

that v-40 looks sick... heres a pic of my c30 R-Design i took the other day

02-17-2013, 04:58 PM	#61
Slasher Tri-State Aficionado Join Date: Nov 2011 Member #22139 My Ride: P1 T5 AWD M66 iTrader: (0)	new Heico shift knob: __________________ why yes, it is a station wagon.

03-08-2013, 03:41 PM	#62
Slasher Tri-State Aficionado Join Date: Nov 2011 Member #22139 My Ride: P1 T5 AWD M66 iTrader: (0)	swapped in some more silicone tubing... __________________ why yes, it is a station wagon.

03-11-2013, 12:09 AM	#63
Frostedv40 Tri-State Aficionado Join Date: Jan 2013 Member #24667 My Ride: 2010 Nissan Cube SL iTrader: (0)	Thought I might post a few updated pics in this thread instead of starting a new one. How my v40 looked when I bought it: New wheels and repainted the grille: Also replaced the front drivers door speakers and replaced some dash pieces that were covered with an old, chipped wood grain sticker kit with the OEM Volvo wood grain kit. Have to replace the MAP sensor and get new coilovers for the rear because it sags way too much went it really shouldn't, also is making the front way too high. Got a new headunit, just waiting for the wiring harness to put it all together. Last edited by Frostedv40; 03-11-2013 at 12:17 AM.

03-11-2013, 02:27 PM	#64
Slasher Tri-State Aficionado Join Date: Nov 2011 Member #22139 My Ride: P1 T5 AWD M66 iTrader: (0)	Looks good Frosted! i recognize that car from the Chili's meet. love the urple. new wheels look good. good call on new overs for the rears as you have some serious reverse-rake going on currently. looking forward to seeing the progression. __________________ why yes, it is a station wagon.

03-16-2013, 09:42 PM	#66
Slasher Tri-State Aficionado Join Date: Nov 2011 Member #22139 My Ride: P1 T5 AWD M66 iTrader: (0)	i hope to make it out for that. bent a rim this week on PA pothole. grrrrrrrrrrr __________________ why yes, it is a station wagon.

03-11-2013, 05:15 PM	#65
Frostedv40 Tri-State Aficionado Join Date: Jan 2013 Member #24667 My Ride: 2010 Nissan Cube SL iTrader: (0)	Thanks man! Yup, that meet wasn't even a week after I had bought the car, planning on getting a bit of work done before the next one in April. Are you planning on going to that as well?

03-17-2013, 12:10 PM	#67
2g Talon Tri-State Post Whore Join Date: Aug 2012 Location: North Wales, PA Member #23531 My Ride: 2014 Focus ST iTrader: (0)	That sucks.. winter beater ftw! Sent from my SGH-T999 using Tapatalk 2 __________________ 2014 Ford Focus ST - Ingot Silver Metallic Heavily modded...

03-17-2013, 01:35 PM	#68
Frostedv40 Tri-State Aficionado Join Date: Jan 2013 Member #24667 My Ride: 2010 Nissan Cube SL iTrader: (0)	Ouch, that sucks big time.

03-20-2013, 09:35 AM	#69
Frostedv40 Tri-State Aficionado Join Date: Jan 2013 Member #24667 My Ride: 2010 Nissan Cube SL iTrader: (0)	Put in the new headunit. I'm sure some of you will probably think an aftermarket screen/dvd player looks tacky but it was a hand-me-down from a friend and free parts are free parts, sounds way better than stock. Map sensor should come by Friday and then it's time to look for new springs. Would ideally like to get new coils all around so I can lower the whole car but right now my main concern is just fixing that rear.

03-31-2013, 05:36 PM	#70
lk250f Tri-State Addict Join Date: Oct 2009 Location: PA Member #14800 My Ride: Mazdaspeed3 iTrader: (0)	Very nice to see some other volvo owners here. I have a 97 850 GLT with 93K. For those of you who dont know, that is the LPT model. I have a ton of parts waiting to go on, most of which that will this week. I have a genuine volvo PCV kit, silicone IC hoses, Snabb inlet pipe, NA throttle body with 960 throttle plate and a 15g turbo i rebuilt to replace the smaller 15g and a 3" OBX downpipe I just bought. The car should be running only about 6psi as is. Once all the parts go on and an exhaust is welded onto the downpipe and I get 315cc injectors. I am going to get a flash tune from ARD lastly. This will up the boost to about 14-15psi. Should make a fun car, the 2.4 LPT is more torquey than the 2.3 HPT engine which is good. Then off to cosmetic parts.... I will post some more pics once I get some more work done! Thanks! __________________ '13 Crystal White Mazdaspeed3

04-06-2013, 01:32 PM	#72
2g Talon Tri-State Post Whore Join Date: Aug 2012 Location: North Wales, PA Member #23531 My Ride: 2014 Focus ST iTrader: (0)	Looks nice man. Dont they always make the center console the biggest pain in the ass to get apart? Lol Sent from my SGH-T999 using Tapatalk 2 __________________ 2014 Ford Focus ST - Ingot Silver Metallic Heavily modded...

05-05-2013, 06:43 PM	#75
vol Tri-State Training Wheels Join Date: May 2013 Location: Ireland Member #25832 My Ride: 1996 Volvo 854-R iTrader: (0)	Nice Volvo's guys Hi vol is my name..joined up the other day I drive a 854R 1996..Auto & live in Dublin Ireland no much happening over here when it comes to modding Volvo's..Will get some pics up soon as I have 3 Posts.. Cheers Vol.

05-05-2013, 07:05 PM	#76
vol Tri-State Training Wheels Join Date: May 2013 Location: Ireland Member #25832 My Ride: 1996 Volvo 854-R iTrader: (0)	854R 1996 Auto Road Train Pics as promised..just click on the link below http://s1228.photobucket.com/albums/ee448/vol07/ Car updates, End of April 2013..

05-06-2013, 03:06 PM	#77
Slasher Tri-State Aficionado Join Date: Nov 2011 Member #22139 My Ride: P1 T5 AWD M66 iTrader: (0)	looks good vol. my HQ is in Belfast area so i got over to your side of the pond every so often. __________________ why yes, it is a station wagon.

05-09-2013, 03:06 PM	#79
Slasher Tri-State Aficionado Join Date: Nov 2011 Member #22139 My Ride: P1 T5 AWD M66 iTrader: (0)	thanks vol. will do! added 15mm spacers to the rear: front shot: __________________ why yes, it is a station wagon. Last edited by Slasher; 05-14-2013 at 11:55 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY section?	WHT_SRKOUKI	TST Forum Info and Feedback	7	02-17-2011 03:50 PM
DIY Section	JerseyTuscani	TST Forum Info and Feedback	21	07-28-2009 07:47 PM
hit and run : From Ask the Law Section	Jeffros Spec V	Off-Topic	4	10-19-2007 04:27 AM