Oil Feed Fitting for a 14b - TriStateTuners.com :: Home of Tristate Auto Enthusiast

Philly-Night-SR · 03-31-2007, 12:34 PM

I don't know why I am having so much trouble finding a fitting for my 14b Oil Feed Line. I have a 3an 40" SS line I am using for the feed (yes I am using 3an instead of 4an as a restrictor because pressure comming from my oil feed location is high)... Anyways, I posted on DSMtuners and PhiladelphiaDSM without any luck.... why can't I find a freaking fitting that will screw directly into the port of my 14b... the threads are 12mx1.25... I can't find any 12x1.25 to 3an or even 4an fittings.... what gives? I know RRE, Buscher, SBR etc all use this type of fitting...

turbo4g63 · 04-01-2007, 05:54 PM

check the hardware store, you never know, you might get lucky and find what you need there, it seems that you covered all the other options

PaleDSM · 04-02-2007, 02:19 PM

I think the problem is the small size of the line. Most run a restrictor inline in a -4AN line. I just looked and I don't even see any listings for a -3AN AN to metric fitting.

Perhaps try a Hydraulic fitting shop like Kenco (215)368-3779

Philly-Night-SR · 04-03-2007, 02:02 PM

$28 dollars later I have a solution....owch

03-31-2007, 12:34 PM	#1
Philly-Night-SR Tri-State Addict Join Date: May 2006 Location: University City, Philadelphia Member #1928 My Ride: 08 135i 6mt fkn fast iTrader: (0)	Oil Feed Fitting for a 14b I don't know why I am having so much trouble finding a fitting for my 14b Oil Feed Line. I have a 3an 40" SS line I am using for the feed (yes I am using 3an instead of 4an as a restrictor because pressure comming from my oil feed location is high)... Anyways, I posted on DSMtuners and PhiladelphiaDSM without any luck.... why can't I find a freaking fitting that will screw directly into the port of my 14b... the threads are 12mx1.25... I can't find any 12x1.25 to 3an or even 4an fittings.... what gives? I know RRE, Buscher, SBR etc all use this type of fitting...

04-01-2007, 05:54 PM	#2
turbo4g63 Tri-State Post Whore Join Date: Nov 2005 Location: near west chester Member #1057 My Ride: 98' 4runner iTrader: (0)	check the hardware store, you never know, you might get lucky and find what you need there, it seems that you covered all the other options __________________ Bill If you guys see a possum...try to kill it, it's not a pet!

04-02-2007, 02:19 PM	#3
PaleDSM Tri-State Post Whore Join Date: Mar 2005 Location: Dublin, Pa Member #274 iTrader: (1)	I think the problem is the small size of the line. Most run a restrictor inline in a -4AN line. I just looked and I don't even see any listings for a -3AN AN to metric fitting. Perhaps try a Hydraulic fitting shop like Kenco (215)368-3779 __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 2000 MR2 Spyder (Yellow) 2013 Hyundai Elantra

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fitting in a Miata.	90Laser	Mazda Talk	10	08-25-2009 01:14 AM
AN fitting -10AN to 1/2 npt	empera	Extreme PSI	9	08-14-2007 11:51 AM

04-03-2007, 02:02 PM	#4
Philly-Night-SR Tri-State Addict Join Date: May 2006 Location: University City, Philadelphia Member #1928 My Ride: 08 135i 6mt fkn fast iTrader: (0)	$28 dollars later I have a solution....owch