05-29-2008, 04:39 PM | #1 |
Tri-State Aficionado
|
What am i? and where is my home?
The line is coming off the turbo and hits a T here the one is obvously connnected to the other line and the other the turbo but, the last line going left is the one below (from previous) is the one being held and is, as is my connectors (bottom two on either side have those black things with nothing connected any way its related to my EVAP code?
__________________
Gamertag = SRTurboNJ 2004 srt To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Last edited by GsrSiHatchie; 05-30-2008 at 01:58 PM. |
05-29-2008, 04:43 PM | #3 |
Tri-State Aficionado
|
yeah thats what i thought but then again my wastegate works fine
__________________
Gamertag = SRTurboNJ 2004 srt To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
05-29-2008, 04:44 PM | #4 |
Tri-State Post Whore
|
|
05-29-2008, 04:46 PM | #5 |
Tri-State Post Whore
|
Thats a vac line going to your wastegate. Is that what your holding with your finger? If it is it should be going to some solenoid/controller/vac source.
__________________
*formerly 95nracer* Instagram @Silverfc88 11.6@123mph Streetport 13bt, Haltech Sprint RE, FIC 1150cc + Delphi 1000cc injectors, Walbro 255, Borg Warner s360 .88, HKS mani, JGS 50mm, Greddy FMIC, HKS Twin Power, AEM water/meth inj |
05-29-2008, 04:47 PM | #6 | |
Tri-State Post Whore
|
Quote:
If its disconnected I think it should overboost or spike. It won't see the pressure it needs to open. Edit: The line looks a little samll to be the same hose as the one that is connected to the wastegate. Did you pull that hose all the way out to make sure?
__________________
*formerly 95nracer* Instagram @Silverfc88 11.6@123mph Streetport 13bt, Haltech Sprint RE, FIC 1150cc + Delphi 1000cc injectors, Walbro 255, Borg Warner s360 .88, HKS mani, JGS 50mm, Greddy FMIC, HKS Twin Power, AEM water/meth inj Last edited by Silverfc88; 05-29-2008 at 04:53 PM. |
|
05-29-2008, 04:52 PM | #7 |
Tri-State Aficionado
|
i havent really noticed any spikes that were enough for me 2 look but, i just need 2 know where this needs to end up
__________________
Gamertag = SRTurboNJ 2004 srt To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
05-29-2008, 04:53 PM | #8 |
Tri-State Aficionado
|
and yeah this is where the line ends up its also attached to a few lines going the same way so im hoping its home is somewhere close
__________________
Gamertag = SRTurboNJ 2004 srt To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
05-30-2008, 09:47 AM | #9 |
Tri-State Post Whore
|
those lines are for the stock boost control system . the evap lines are around the firewall and do not go to the boost solenoids. check the lines near the fuel line by the fire wall there is a rubber part of the evap line that the heat beats up and causes a leak
__________________
*formerly ray@turbotek* Last edited by RayArroyo; 05-30-2008 at 09:49 AM. |
05-30-2008, 01:58 PM | #10 |
Tri-State Aficionado
|
up for new info sorry i took my intake out and realized it wasnt the wastegate line
__________________
Gamertag = SRTurboNJ 2004 srt To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. |
06-01-2008, 02:42 PM | #11 |
Tri-State Addict
Join Date: Aug 2005
Location: your mama's house, starting a small fire in her panties
Member #712
My Ride: 02 Nissan Sentra Spec 5 iTrader: (0)
|
looks like an evap line. in the pic it looks like a piece of plastic tube is broken off inside. look around and see if something is missing the plastic nipple.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Just got home... | S4toSTI | Off-Topic | 12 | 04-23-2006 06:07 PM |