Reputable engine rebuilders? - TriStateTuners.com :: Home of Tristate Auto Enthusiast

revenant · 07-09-2007, 07:07 PM

I've finally saved enough money to get my driveway ornament DSM back on the road. It's a 95 TSi (auto,fwd) that threw a rod bearing in late January of '06. I looked into a 6 bolt swap and the idea of buying a jdm engine, but I decided on just rebuilding my 7 bolt.

The motor is completely stock at this point and I was hoping to have it rebuilt with aftermarket rods and pistons and a few other mods (nothing major). The motor will be pulled and ready, I just need someone to rebuild it. If anyone could recommend a good shop or builder I would very much appreciate it.

Sled · 07-09-2007, 07:57 PM

CF performance or A.E. Tech.
CF 267-210-2071
A.E. 215-794-2516

these two build engines for alot of the local shops in the Philly and New York areas. im not naming those shop, but just because you take a engine somewhere doesnt mean their building it for you.

gatesrex91 · 07-10-2007, 03:57 AM

Quote:

Originally Posted by Sled

CF performance or A.E. Tech.
CF 267-210-2071
A.E. 215-794-2516

these two build engines for alot of the local shops in the Philly and New York areas. im not naming those shop, but just because you take a engine somewhere doesnt mean their building it for you.

so true....cough.....a popular volkswagon shop......cough

underpressure02 · 07-10-2007, 09:40 AM

I have always had great luck with CMS machine they are up near allentown. If you want the contact info let me know.

07-09-2007, 07:07 PM	#1
revenant Tri-State Aficionado Join Date: May 2006 Location: Berks County Member #1969 My Ride: 91 3000gt SL iTrader: (0)	Reputable engine rebuilders? I've finally saved enough money to get my driveway ornament DSM back on the road. It's a 95 TSi (auto,fwd) that threw a rod bearing in late January of '06. I looked into a 6 bolt swap and the idea of buying a jdm engine, but I decided on just rebuilding my 7 bolt. The motor is completely stock at this point and I was hoping to have it rebuilt with aftermarket rods and pistons and a few other mods (nothing major). The motor will be pulled and ready, I just need someone to rebuild it. If anyone could recommend a good shop or builder I would very much appreciate it. Last edited by revenant; 07-09-2007 at 07:44 PM.

07-09-2007, 07:57 PM	#2
Sled Tri-State Post Whore Join Date: Feb 2006 Location: Doylestown PA Member #1475 iTrader: (0)	CF performance or A.E. Tech. CF 267-210-2071 A.E. 215-794-2516 these two build engines for alot of the local shops in the Philly and New York areas. im not naming those shop, but just because you take a engine somewhere doesnt mean their building it for you. __________________ TST's most hated! To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. 05-28-2010 Insubordination (Second-Degree) 05-18-2010 Disrespecting Another Member 08-20-2009 Dodging Swear Filter / Inappropriate lang 01-06-2009 Non-Vendor Advertising

07-10-2007, 09:40 AM	#4
underpressure02 Tri-State Post Whore Join Date: Jul 2005 Member #645 iTrader: (0)	I have always had great luck with CMS machine they are up near allentown. If you want the contact info let me know. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures. Northeast Drag Racing Club/Performance Parts Webstore

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dyno shops....reputable ones	fst100	Pennsylvania	7	09-30-2010 09:20 PM
Reputable sj shop?	LostMarine	New Jersey	4	09-08-2009 07:08 PM
Reputable PDR?	doug	Networking: requests and offers	0	04-20-2009 03:32 PM
Reputable Alarm installers	asdfasdf128	New Jersey	1	04-23-2008 11:31 AM
any sr20 rebuilders out there?	240sr20	Nissan / Infiniti Talk	8	01-10-2007 03:31 PM